NIH 3D
Tubing Strap Connector
- Creator (as listed at the source)
- Not listed at the source.
- Licence
- CC-BYThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- GLB STL
- Pricing
- Free
- Published
- Category
- Devices and Hardware
- Downloads
- 39
Overview
Design for connector clips to enable 5mm tubing to be used in place of elastic-strap for face shields with cleat attachment such as DtM 3.1 (3DPX-013359) & DtM 4.0 face shields (3DPX-013830P). The design includes two connectors & tab (3DPX-013680)
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
DtM-v3.0-BS2.3 Face ShieldThis is a remix of DtM-v3.0. It has been modified from the DtM-v3.0 in the following ways: A side clip system has been added to the cradle/frame to replace the pegs for an elastic strap with a 3D printed strap.
Optimized DtM v3.1 Face Shield PPE, 12% faster printing, filet edgesOptimization of "DtM v3.1 Face Shield PPE" Please read the General Information section of the original posting before printing this remix.
DtM-v3.1 Face Shield PPE Remix - Extended for LoupesThis is a remix of the DtM-v3.1 Face Shield and has been extended to allow for use of lupes with a light. This modification was made with dantal workers in mind.
DtM-v3.1 Face Shield PPE, 3D printable headband NO LOGOThe following refers to: 3DPX-013359 The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks...
Covid Protection HelmetPersonal Protection Equipment. Sci-Fi COVID protection helmet with filters, air circulation fans and headlights. My version is decorated as Starfleet Medical helmet. Comment: Thingiverse is about 3D desing and print.
VERSION 2: Wiles COVID Pandemic Mask - Fight the PPE Shortage,Check end of summary for regularly released updates. VERSION 2 FILE REPACK IS LAUNCHED 4/12/20: -Now 4 sizes instead of 6, and renamed: Large Wide, Large Narrow (most people so far), Small Wide, Small Narrow (next most common, smaller...
Medical Surgical Face Shield - No Tools or Hole Punch Needed - 32 Min Print Time! - PPE
SwitchHook Door Tool for COVID-19SwitchHook (V3.1) ================= Update: 4/15/2020: A new version has been published -------- This is a hook tool to assist in opening doors (inspired by Coolioiglesias' Savegrabber , though it uses no part of its design) It is modeled...
SwitchHook Door Tool v4.2 - (Touchscreen Compatible)SwitchHook (V4.2 - updated 5/15/2020) ================= "download all" button may not work. If not, please download .stl files individually V4.2 published. SwitchHookV-4-2-X files are the latest ones.
CIP-GEN4 3M Respirator Port Cover by Forward Thinking SolutionsThe Cover-Inhalation Port, Gen 4 (CIP-Gen4) is a bayonet cap that will shut off one of the two inhalation ports on the 3M 6000 series half face respirators.
Hat HangerBoost Me Help me out with a Boost! Thanks for checking out my design! Keep your hard hat off the floor and within easy reach with this Hard Hat Hanger .
Hard Hat Ear Plug Keeper V2Hard Hat Ear Plug Saver | Helmet Mounted Ear Plug Holder Never lose your ear plugs again! This simple clip mounts directly to the elastic headlamp strap on your hard hat, giving you a clean, secure place to store reusable corded ear plugs...
Flexur - Flexible Mask Strap HolderThis is a thicker mask strap I created for my workplace that handles the long-term delamination of the retaining arms. The center body has been made flexible and thick for a long operational life.
/PInças_GarrSTL File – Safety Glove Holder Clip | PPE Glove Grabber | 3D Printing Filea_de_LuvasProduct Description Keep your safety gloves organized and always within reach with this PPE safety glove holder clip, designed for 3D printing.
EaglesWe took the montana mask, found at makethemasks and changed the size to be smaller and the opening to be circular. This was for the purpose of N-99 filters that are 2" and are used by allergist in a spirometer.
Reusable Mask PPE Alternative (MalaMask) - 95% Efficient FilterA mask is only as good as the filter that it uses... Filter First, mask second! IT PASSED! We have found filters that have passed the 95% efficiency at the 0.3 micron spec! See the conclusion in the filter research document .
PNWS - FaceshieldThis is an update of "DtM-v3.1 Face Shield PPE, 3D printable headband NO LOGO", item 3DPX-013359. Updates made based on clinical feedback are: Reduced mass and print time Improvements to shield retention while reducing stress applied to...
BE Mask (Version 1.3.4)The BE Mask is a 3D-printable reusable mask with replaceable filter inserts. Our documentation describes our use of novel materials, fit considerations, assembly process, seal, sizing and filter cartridge efficacy.
ASU v4.1 Face Shield3D-printed headband for protective Face Shield This latest iteration of the ASU 3D printed headband (v4.1), has been designed as a support for a flexible face shield “lens” and a flexible “cowl” to protect front-line health workers from...
EZ Face Shield for Under a DollarThis face shield was designed to be printed quickly and assembled with inexpensive and readily available materials while providing full face protection, comfort and adjustable fit. A fully assembled shield will cost less than $1.
3D Printed Respirator MaskThis 3D printed respirator mask is fexible for an air-tight seal and can be used with a variety of filter media, including MERV or HEPA non-woven filters.
Surgical Mask Band - smooth surfaces / minimal retractionAfter MANY test prints of a variety of available models I was still looking for a design that minimized retraction and infill for easier FDM 3D Printing.
CNC Cut Reusable Face Shield DesignA simple face shield that can be rapidly cut on a CNC machine out of .25" or thicker HDPE plastic. The clear face shields are attached with a standard 3 ring binder hole pattern so they can be easily made from clear plastic.
3DVerkstan V3 - Face Shield3DVerkstan V3 - Face Shield Submitted in collaboration with and with permission from the 3DVerkstan team. There is a shortage of protective gear for doctors and nurses, so we've designed a frame for holding standard sized plastic sheets.
Stopgap Surgical Face Mask (SFM) Revision BStopgap Surgical Face Mask (SFM) Revision B * See the “Documentation” tab for detailed information including the Instructions For Use, Manufacturing Instructions, Bill of Materials, and Test Report * * See the “How to Make” tab for build...
Face Mask*Cap and gasket files updated on 4/30/2020* Optimized for FDM 3D Printing. Not really suitable for SLS, SLA or injection molding, due to varying wall thickness (0.85-1.2mm).
Minimum Viable Product Face Shield v1This device is a general purpose face shield intended for use in the community and is not suitable for use by a healthcare professional or in a healthcare facility or environment, as described in FDA Guidance Enforcement Policy for the...
PanFab Powered Air Purifying Respirator- Commercial FilterTwo designs for Powered Air Purifying Respirators (Panfab PAPRs) with modular and interchangeable components were engineered and tested to NIOSH-equivalent standards.
Surgical Mask Band for Ear Comfort - Extra Security V2This is a strap designed for use with surgical masks to relieve pressure on the ears. It was designed with the intention of providing greater security (clips fasten the mask bands in place) and minimal possibility of entaglement in the...
Surgical Mask Strap (Stackable Design)This is a strap designed to help release tension from surgical masks on ear. We have approached the idea from a quick printing point of view even on budget 3D printers as well as reducing material usage to create an efficient model.
Surgical Mask Tension Release with infinite adjustabilityThis serves the same purpose as the Surgical Mask Tension Release Band for Ear Comfort & Extended Use submitted by Davis Becker (Model ID 3DPX-013410), but uses two pieces of elastic for infinite adjustability; the two elastics are...
Ear Saver3D Models for Large, Medium, Small and Extra Small Ear Savers Optimized for 0.4mm and 0.6mm Nozzle Sizes.
Surgical Mask Strap Clip - Ear SaverThis is a 3D printable band designed to alleviate pain to the ears during extended use of facial masks with elastic ear loops. The band has a set of hooks for attaching the ear loops of the mask.
SmallPrinter Face shield PPE similar to DtM-v3.1 by 3dpxFDA Notice on Emergency Response
3D Printed Ring Style Face MaskThe Ring is a reusable respiratory mask with a circular opening, which a round filter can be placed over and secured with a rubber band.
3d Mask - SLUHN and Filament InnovationsSt. Luke's University Health Network and Filament Innovations worked together to create a 3D Printed mask to help with the supply shortage, which can be sterilized and re-used (minus the filter).
3DVerkstan 3D printed face shield head bandThe following refers to: 3DPX-013306 The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks...
SLUHN FI 3d Mask*See the Documentation tab for detailed information including the Instructions for Use, Manufacturing Instructions, Bill of Materials, and Test Report* The SLUHN FI 3d Mask is designed to be a suitable replacement for a respirator (N95)...
Surgical Mask Band for Ear Comfort - Extra SecurityThis is a strap designed for use with surgical masks to relieve pressure on the ears. It was designed with the intention of providing greater security (clips fasten the mask bands in place) and minimal possibility of entaglement in the...
NES Universal Frame for Face ShieldWe have created a shield holder that allows you to wear sheets around you such as office supplies. We have gathered the opinions of healthcare professionals and revised it many times.SliSearch lists public model details and links to the original source. It does not host files or verify licences.