NIH 3D
Surgical Mask Band for Ear Comfort - Extra Security V2
- Creator (as listed at the source)
- Not listed at the source.
- Licence
- Public DomainThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- GLB STL
- Pricing
- Free
- Published
- Category
- Devices and Hardware
- Downloads
- 115
Overview
This is a strap designed for use with surgical masks to relieve pressure on the ears. It was designed with the intention of providing greater security (clips fasten the mask bands in place) and minimal possibility of entaglement in the wearer's hair. Can be printed flat with no supports and minimal stringing (Tested with PLA). Similar filament consumption (1.400m 1.75mm PLA each) as 3DPX-013410 , to which I attribute the basic inspiration for this design. Any suggestions are welcome :)
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Surgical Mask Band - smooth surfaces / minimal retractionAfter MANY test prints of a variety of available models I was still looking for a design that minimized retraction and infill for easier FDM 3D Printing.
Surgical Mask Tension Release with infinite adjustabilityThis serves the same purpose as the Surgical Mask Tension Release Band for Ear Comfort & Extended Use submitted by Davis Becker (Model ID 3DPX-013410), but uses two pieces of elastic for infinite adjustability; the two elastics are...
Surgical Mask Strap Clip - Ear SaverThis is a 3D printable band designed to alleviate pain to the ears during extended use of facial masks with elastic ear loops. The band has a set of hooks for attaching the ear loops of the mask.
Surgical Mask Band for Ear Comfort - Extra SecurityThis is a strap designed for use with surgical masks to relieve pressure on the ears. It was designed with the intention of providing greater security (clips fasten the mask bands in place) and minimal possibility of entaglement in the...
Reduced Materials Surgical Mask Tension Release BandSurgical Mask Tension Release Band for Ear Comfort & Extended Use. This is a modified version of Model ID 3DPX-013410.
Surgical Mask Strap Clip - Ear SaverThis is a 3D printable band designed to alleviate pain to the ears during extended use of facial masks with elastic ear loops. The band has a set of hooks for attaching the ear loops of the mask.
Surgical Mask Tension Release Band with Looped EndThis is a variation of the other tension relief bands. The biggest change is that one end has a loop instead of hooks for the mask's elastic band.
Ear Saver (surgical mask tension release band)This design was to maximize the FDM printing style for strength and flexibility from the annealed plastic. Low material usage combined with a thicker layerheight helped increase flexibility but maintain elastic strength.
Surgical Mask Tension Release Band for Ear Comfort & Extended UseSurgical Mask Tension Release Band for Ear Comfort & Extended Use. v2 uses less material for faster printing.
Surgical Mask Strap (Stackable Design)This is a strap designed to help release tension from surgical masks on ear. We have approached the idea from a quick printing point of view even on budget 3D printers as well as reducing material usage to create an efficient model.
Surgical Mask Tension Release Band with 35mm extensionI am not the original creator of this part; I've only modified it. The original creator is Davis Becker who submitted the design to the national institute of health: I have 3D printed and donated over 250 units of his design.
Surgical Mask Tension Release Band with 35mm extension and CombAfter printing and donating some of these headbands the feedback we received was that they only worked if they had a pony tail and without one the headband would slide down a lot.
Minimalist Surgical Mask Ear Loop Relief (SMELR) BandThis is a minimalist version of a surgical mask ear loop relief band (SMELR Band). There are many, many designs out there for these bands -- but most of them are more complex than they really need to be.
Surgical Mask Ear SaverEar-saving surgical mask straps Surgical masks are now worn the entire day by health care professionals and others. The straps typically wrap behind each ear.
COVID Face Mask Ear Saver – Fixed & Adjustable Strap / Buckle / TensionerThis ear saver is designed to relieve pressure from the ears when wearing a face mask for extended periods. It improves comfort and provides a more secure fit.
Surgical Mask StrapThis Surgical Mask Strap is designed to protect the ears when wearing protective masks. It is an improvement of the "Surgical Mask Strap Remix by Suraky".
X-Strap for face mask
Surgical Mask Strap RemixWow, at the end of it's first year on Thingiverse, this Thing became the most popular item on Thingiverse in the preceding 12 months. A year and a half after sharing it, it's still getting downloaded 75 to 100 times a day.
VERSION 2: Wiles COVID Pandemic Mask - Fight the PPE Shortage,Check end of summary for regularly released updates. VERSION 2 FILE REPACK IS LAUNCHED 4/12/20: -Now 4 sizes instead of 6, and renamed: Large Wide, Large Narrow (most people so far), Small Wide, Small Narrow (next most common, smaller...
Surgical mask strap (updated 16/04/2020) Hair clip versionSurgical Mark Strap(16/04/20) updated: Hi, friends.Thanks for the reply (especially Myrandor), I had a modified version uploaded: 1, 1.5 mm thickness 2. NO round corner 3. Hook enhanced 4.
Medical Surgical Face Shield - No Tools or Hole Punch Needed - 32 Min Print Time! - PPE
Flexur - Flexible Mask Strap HolderThis is a thicker mask strap I created for my workplace that handles the long-term delamination of the retaining arms. The center body has been made flexible and thick for a long operational life.
Reusable Mask PPE Alternative (MalaMask) - 95% Efficient FilterA mask is only as good as the filter that it uses... Filter First, mask second! IT PASSED! We have found filters that have passed the 95% efficiency at the 0.3 micron spec! See the conclusion in the filter research document .
BE Mask (Version 1.3.4)The BE Mask is a 3D-printable reusable mask with replaceable filter inserts. Our documentation describes our use of novel materials, fit considerations, assembly process, seal, sizing and filter cartridge efficacy.
Face Mask*Cap and gasket files updated on 4/30/2020* Optimized for FDM 3D Printing. Not really suitable for SLS, SLA or injection molding, due to varying wall thickness (0.85-1.2mm).
Surgical Mask Strap - Ear SavingThis support for surgical masks (ear saving) has simple couplings to avoid contact of the masks with your hands. Designed for use by healthcare professionals, patients and other users. It has the following dimensions: 19cm x 2cm x 0.1cm.
Ear Saver3D Models for Large, Medium, Small and Extra Small Ear Savers Optimized for 0.4mm and 0.6mm Nozzle Sizes.
Mask Comfort Strap
Mask Comfort Strap v2 Updated
Surgical Mask Tension Release Band for Ear Comfort & Extended Use-Remix2This is a small tweak to the design Model ID 3DPX-013410 to enhace strength of the part. I printed the previous version and found the center section to be weak. Dimensions are approximately the same, and print time may be 2 -3% longer.
Surgical facemask ear saverSurgical mask ear saver designed to retain position on head for comfort I spent 15 years doing fire/rescue and wore PPE as needed (personal protection equipment).
Seldinger Stopgap Surgical Mask with CartridgeThis is a variant of the Stopgap Surgical Mask with an internal cartridge. This design has been optimized for production on FDM 3D printers. Designs with and without supports have been included.
PPE quick print maskAlt v2 should be considered viable. 3d printed PPE mask that fits 2.125" cuts of approved filter materials, elongating a precious resource. Simple design, easy to print, vacuum form or mold.
Maker Mask V.4.6 3D Printable Community MaskThe Maker Mask is a fully 3D Printable general purpose face mask for the community. This version is intended to be printed by individuals with a deep knowledge of 3D printing. Assembly is required.
Mask Head Harness v1.5Respirator-style head harness for masks. Relieve the pressure on ears. Feels more comfortable than the ones around neck. . Can be printed on 200x200 bed diagonally. Tested with PLA. Should work with any rigid filament.
Robins SPARK community mask v2Developed by the Robins SPARK Innovation Hub, Robins Air Force Base, in collaboration with Mercer University and the Air Force Advanced Technology and Training Center.
BUTMASK-H2 Multiple mask sizes availableProtection halfmask originally designed as improvised PPE for 3D printing enthusiasts. Intended to replace regular surgical masks and respirators when these are unavailable or do not fit on tightly.
3D Printable Face MaskA 3D printed mask available in small, medium, and large sizes - all sizes use the same size filter membrane holder.
face mask strap ear protectorface mask strap ear protector - Last Update: - 13.06.2020 -> V14: optimized version with hinges! 16.05.2020 -> V10: optimized version for the neck, 1mm thick 16.05.2020 -> V11: optimized version for the neck, 0,8 mm thick 16.05.2020 ->...
Squid Game Inspired - YKK Rear mask tri buckle*NOTE: There's a bug on Thingiverse where sometimes it will give a 404 error if you try to click the "Download all files" button. This is a known Thingiverse bug, and they haven't fixed it.SliSearch lists public model details and links to the original source. It does not host files or verify licences.