NIH 3D
DtM-v3.0-BS2.3 Face Shield
- Creator (as listed at the source)
- Not listed at the source.
- Licence
- Public DomainStated at the source marketplace; SliSearch does not verify licences.
- File types
- GLB IPT STL
- Pricing
- Free
- Published
- Category
- Devices and Hardware
- Downloads
- 39
Overview
This is a remix of DtM-v3.0. It has been modified from the DtM-v3.0 in the following ways: A side clip system has been added to the cradle/frame to replace the pegs for an elastic strap with a 3D printed strap. This is to enable others without access to elastic straps to have a means to create an attachment mechanism for the face shield. The 3D printed strap is made to be printed in 3 parts allowing for even the typical small 3D printer to be used to make parts for the face shields. The multiple openings allow for custom fitting of the headband to individual head sizes ranging from small to very large. This may benefit from using TPU/flexible materials for improved retention on the head. End clips have been added to help with face shield retention during movement/accidental bumps. A bevel has been added to the inner forehead region to improve comfort. These modifications should have minimal effect on the efficacy of the 3D printed face shield design relative to DtM-v3.0, yet check with the medical receiving units for acceptance criteria. This model will be uploaded to NIH as a remix of the DtM-v3.0 design. Please refer to the original DtM-v3.0 instructions for use and orginal valid
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Medical Surgical Face Shield - No Tools or Hole Punch Needed - 32 Min Print Time! - PPE
Covid-19 Face Shield (Short version)This is a shortened version of for smaller printers This face shield design uses two sets of hole punches to hold a transparency film, or any other clear plastic, to the frame.
Covid-19 Face ShieldThis face shield design uses two sets of hole punches to hold a transparency film, or any other clear plastic, to the frame.
Covid-19 Face ShieldTo print 16 of these at once use the stl located here: This face shield design uses two sets of hole punches to hold a transparency film, or any other clear plastic, to the frame.
Face shield Unesp Ergonomics 3D 1.0Our model has as benefits an easy way to be produced by any kind of 3D printing technology, requiring few materials to be made (two 3D printed parts, adhesive tape, transparent PVC and rubber band).
COVID 19 3dverkstan Face Shield for Printing in Stacks
Very fast print 10g Face Shield / Visière COVID-19
COVID 19 3dverkstan Face Shield Extended Stack Remix
Easy 3D printed Face ShieldYet another face shield. Fast and light 3D printed Face shield. Changelog: rev0.6: adjusted autolock, more flexible 28/03/2020 added STEP files! Easy to mount A4 acrylic sheets. Tested with 0,10 to 0,24mm thickness.
Nose Clips (for Face Masks) - Seven Varieties
VERSION 2: Wiles COVID Pandemic Mask - Fight the PPE Shortage,Check end of summary for regularly released updates. VERSION 2 FILE REPACK IS LAUNCHED 4/12/20: -Now 4 sizes instead of 6, and renamed: Large Wide, Large Narrow (most people so far), Small Wide, Small Narrow (next most common, smaller...
Covid-19 Face Shield-> German Standard
SwitchHook Door Tool for COVID-19SwitchHook (V3.1) ================= Update: 4/15/2020: A new version has been published -------- This is a hook tool to assist in opening doors (inspired by Coolioiglesias' Savegrabber , though it uses no part of its design) It is modeled...
SwitchHook Door Tool v4.2 - (Touchscreen Compatible)SwitchHook (V4.2 - updated 5/15/2020) ================= "download all" button may not work. If not, please download .stl files individually V4.2 published. SwitchHookV-4-2-X files are the latest ones.
Covid19 Face ShieldWatch youtube video for assembly instuctions:
EaglesWe took the montana mask, found at makethemasks and changed the size to be smaller and the opening to be circular. This was for the purpose of N-99 filters that are 2" and are used by allergist in a spirometer.
Face ShieldThis is the Stratasys design for a face shield (without logo), full details can be found at: Stratasys.com however a brief overview has been provided below.
Covid Mask Respirator - 3D Printable COVID-19 (Corona virus)
mask adapter (no touch ear design) and comfortableI designed this to not touch the ears at all and be so comfortable you forget you're wearing it. Hair and bun are not required (optional). This is especially important when working 8 to 12 hour days.
CORONAVIRUS / FLU REUSABLE MASKREAD THE MATERIALS AND HOW TO ARM BELOW. See the movement in my city! Coronavirus arrived in my country México and here in my state the pharmacies have already exhausted the covers, gels and masks.
salva orejas ear saver custom v2.0 - parametric - covid - face mask holderSalva orejas para mejorar la comodidad de mascarillas de doble goma. Compatible con base: ------- Covid Ear Relief Band Ear Saver Earsaver Salvaorejas
Face Mask HolderI didn't plan on printing a Love Cures face mask holder but after I designed it I thought I would spread some positive vibes by adding the heart Cures message on the visible side.
FabLab U. de Chile FaceShieldFablab Face Shield A printable face shield for the Corona outbreak, based on the Prusa initiative, you can get more info at This design doesn't involve modifying the commercial parts nor the printed headband.
Visera elevable con 4 posiciones - Face shield mobile with 4 positions - COVID-19Ingenio Triana - Sevilla - Andalucía - España Video instrucciones: Descarga gratuita: Instagram: LinkdIn: ----- English----- Details: Face shield mobile specially designed to protect you in work environments.
Temperature Sensitive Color Changing Face Shield
Covid-19 Face Shield fast/simple version to cut in Laser Acrylic or 3D print
COVID-19 MASK v2 (Fast print, no support, filter required)BEFORE DOWNLOADING >>> Please read the full license. This is a free model, and you can share it and adapt it. But you must give appropiate credit and may not use it for commercial purposes (absolutely no exceptions).
Corona-COVID-19 MASK Darth Vader Star wars no need for supportThis mask can be fitted with several filters but obviously does not provide full protection. I listen to any design ideas and try to help with any problems that may arise.
Ergonomic "Deri" Door Opener / grabber - Covid-19 / CoronaFor opening doors and pressing buttons without touching. Dual mode-direct touch or sideways for more leverage.
Covid Protection HelmetPersonal Protection Equipment. Sci-Fi COVID protection helmet with filters, air circulation fans and headlights. My version is decorated as Starfleet Medical helmet. Comment: Thingiverse is about 3D desing and print.
Simply Flexible Mask Valvy Covid-19Yet another easy printable and usable mask. (Updated 03-26-2020. Add readme.txt and zipper edition) ===================================================== (---- Notice ----) Why will I not design this mask for printing in PLA or...
Corona Door OpenerNew Version ist online: I've done some optimizations in the erognomics and I made the difficult part that broke through a little thicker.
Pleat Maker Jig UPDATED for Fabric Face Masks - Covid-19
Covid-19 ToolMade some changes to a design I found on kickstarter. In light of the current pandemic, getting tools to people sooner than later is important. This tool should be printed in Copper or Anti-Microbial PLA when possible.
Easy Grip No Touch Door OpenerEasy grip no touch door opener, with a button push extension (for light switches and lift buttons). It has a hole for a lanyard.
COVID-19 MASK UPGRADEA cutout for a cotton pad with 58 mm changing and two new cap designs has been added. Es wurde eine Aussparung für ein wattepad mit 58 mm Durchmesser geschaffen, und zwei neue Kappen Designs hinzugefügt.
corona covid door openerPocket door opener, so you don't have to touch the door handles in public places in case you HAVE TO go out. I added grip for the thumb and removed the sharp edge, so it won't be taken as a weapon (as it happened to me).
Covid-19 MaskDrucken ohne Support! - Drucken - Mit Föhn oder heißem Wasser warm machen und zurecht biegen. - Filter (MakeUp Pads, Kohlefilter) - Gummi Band befestigen Viel Spaß beim nachbauen! Bleibt Gesund!
Covid-19 Mask - Face mask close to face更多照片 More Printing Photos: All Files download 所有檔案下載： ◎「口罩密合器」優點 1. 造型簡單，容易3D列印，列印時間也較短 2. 可自由搭配顏色，依口罩顏色列印 3. 可熱塑服貼臉型(個人化)，工具容易取得，人人有吹風機，隨時就可加熱塑型 4. 口罩可拉出立體說話空間，不漏氣 5. 戴上眼鏡不起霧 Good point 1.
Face Mask Fallout 2 ver2.21SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.