NIH 3D
Covid-19 Face Shield
- Creator (as listed at the source)
- Not listed at the source.
- Licence
- CC-BY-NC-SAThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- 3MF GLB STL
- Pricing
- Free
- Published
- Category
- Devices and Hardware
- Downloads
- 107
Overview
To print 16 of these at once use the stl located here: This face shield design uses two sets of hole punches to hold a transparency film, or any other clear plastic, to the frame. This shield is a hybrid remix of the Prusa Rc3 and the shields incorperating the best elements from both based on feedback from doctors currently using them. Improvments from RC3: Top section covered to prevent droplets from entering from above Faster to print and takes less material Transparency rettenion system more reliable Does not require elestic band to hold shield on to head Can be made with a standard 3 hole puncher as opposed to using a custom cut plastic sheet Improvements from More space for saftey googles in the front (additonal 30mm) Easier to assemble becuase of larger tolerances on the transparency pegs This shield is currently undergoing testing in some hospitals
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Covid-19 Face Shield (Short version)This is a shortened version of for smaller printers This face shield design uses two sets of hole punches to hold a transparency film, or any other clear plastic, to the frame.
Covid-19 Face ShieldThis face shield design uses two sets of hole punches to hold a transparency film, or any other clear plastic, to the frame.
DtM-v3.0-BS2.3 Face ShieldThis is a remix of DtM-v3.0. It has been modified from the DtM-v3.0 in the following ways: A side clip system has been added to the cradle/frame to replace the pegs for an elastic strap with a 3D printed strap.
Medical Surgical Face Shield - No Tools or Hole Punch Needed - 32 Min Print Time! - PPE
Face ShieldThis is the Stratasys design for a face shield (without logo), full details can be found at: Stratasys.com however a brief overview has been provided below.
Easy 3D printed Face ShieldYet another face shield. Fast and light 3D printed Face shield. Changelog: rev0.6: adjusted autolock, more flexible 28/03/2020 added STEP files! Easy to mount A4 acrylic sheets. Tested with 0,10 to 0,24mm thickness.
Covid Protection HelmetPersonal Protection Equipment. Sci-Fi COVID protection helmet with filters, air circulation fans and headlights. My version is decorated as Starfleet Medical helmet. Comment: Thingiverse is about 3D desing and print.
VERSION 2: Wiles COVID Pandemic Mask - Fight the PPE Shortage,Check end of summary for regularly released updates. VERSION 2 FILE REPACK IS LAUNCHED 4/12/20: -Now 4 sizes instead of 6, and renamed: Large Wide, Large Narrow (most people so far), Small Wide, Small Narrow (next most common, smaller...
Covid-19 Face Shield-> German Standard
SwitchHook Door Tool for COVID-19SwitchHook (V3.1) ================= Update: 4/15/2020: A new version has been published -------- This is a hook tool to assist in opening doors (inspired by Coolioiglesias' Savegrabber , though it uses no part of its design) It is modeled...
SwitchHook Door Tool v4.2 - (Touchscreen Compatible)SwitchHook (V4.2 - updated 5/15/2020) ================= "download all" button may not work. If not, please download .stl files individually V4.2 published. SwitchHookV-4-2-X files are the latest ones.
EaglesWe took the montana mask, found at makethemasks and changed the size to be smaller and the opening to be circular. This was for the purpose of N-99 filters that are 2" and are used by allergist in a spirometer.
EZ Face Shield for Under a DollarThis face shield was designed to be printed quickly and assembled with inexpensive and readily available materials while providing full face protection, comfort and adjustable fit. A fully assembled shield will cost less than $1.
CNC Cut Reusable Face Shield DesignA simple face shield that can be rapidly cut on a CNC machine out of .25" or thicker HDPE plastic. The clear face shields are attached with a standard 3 ring binder hole pattern so they can be easily made from clear plastic.
Stopgap Surgical Face Mask (SFM) Revision BStopgap Surgical Face Mask (SFM) Revision B * See the “Documentation” tab for detailed information including the Instructions For Use, Manufacturing Instructions, Bill of Materials, and Test Report * * See the “How to Make” tab for build...
Minimum Viable Product Face Shield v1This device is a general purpose face shield intended for use in the community and is not suitable for use by a healthcare professional or in a healthcare facility or environment, as described in FDA Guidance Enforcement Policy for the...
PanFab Powered Air Purifying Respirator- Commercial FilterTwo designs for Powered Air Purifying Respirators (Panfab PAPRs) with modular and interchangeable components were engineered and tested to NIOSH-equivalent standards.
3DVerkstan 3D printed face shield head bandThe following refers to: 3DPX-013306 The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks...
SLUHN FI 3d Mask*See the Documentation tab for detailed information including the Instructions for Use, Manufacturing Instructions, Bill of Materials, and Test Report* The SLUHN FI 3d Mask is designed to be a suitable replacement for a respirator (N95)...
NES Universal Frame for Face ShieldWe have created a shield holder that allows you to wear sheets around you such as office supplies. We have gathered the opinions of healthcare professionals and revised it many times.
PanFab Powered Air Purifying Respirator- Commercial Blower UnitTwo designs for Powered Air Purifying Respirators (Panfab PAPRs) with modular and interchangeable components were engineered and tested to NIOSH-equivalent standards.
3D Printed Face Shield (MITRE)The following refers to: 3DPX-013406 The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks...
Rapid Production Face shield - laser cut visor - 35min 3D print time
PanFab Powered Air Purifying Respirator- Custom Blower UnitTwo designs for Powered Air Purifying Respirators (Panfab PAPRs) with modular and interchangeable components were engineered and tested to NIOSH-equivalent standards.
Stopgap Surgical Hood (MITRE)During this COVID-19 pandemic most elective surgeries have been cancelled, which leaves many surgical drapes unused.
Visor Extension for 3DVerkstan Protective Visor (Ideal for dentists, small 3D printers)This is the extension to the 3DVerkstan Protective Visor, North American 6 Hole Variant, currently being used by the Triangle COVID chapter of Masks for Docs.
Durable faceshieldRedesigned 3d printed face shield with forehead hood. New design eliminates dog ear style of lateral clear shield attachment points.
VMO MASK V4 - RESPIRATOR - CORONAVIRUS COVID-19VMO RESPIRATOR V4 (MASK) INSTRUCTIONS: I recommend doing the Horizontal Expansion Test, to verify if the printer is correctly calibrated, before printing the parts TEST: HorizontalExp.stl 1.- Print all parts (Included two sizes of Mask, I...
NES Universal Frame for Face ShieldWe have created a shield holder that allows you to wear sheets around you such as office supplies. We have gathered the opinions of healthcare professionals and revised it many times.
Face Shield designed by Dr. Aaron Douen and David ShukhmanThis is a novel design for a face shield PPE that is both efficient and comfortable to use. This is a plastic frame for the forehead meant to be used with a full face covering.
NES Universal Frame for Face ShieldWe have created a shield holder that allows you to wear sheets around you such as office supplies. We have gathered the opinions of healthcare professionals and revised it many times.
3D Systems Face Shield Frame - High Capacity SLS NylonThe 3D Systems face shield frame is designed as a two part 3D printed solution for needed face shield PPE.
Stopgap Surgical Face Mask (SFM)Stopgap Surgical Face Mask (SFM) This model has been superseded by Stopgap Surgical Face Mask revision B , which was designed to increase comfort. This version may still be used, but see the revision B link for improvements.
PanFab Powered Air Purifying Respirator- Custom Blower UnitTwo designs for Powered Air Purifying Respirators (Panfab PAPRs) with modular and interchangeable components were engineered and tested to NIOSH-equivalent standards.
PanFab Powered Air Purifying Respirator- Custom FilterTwo designs for Powered Air Purifying Respirators (Panfab PAPRs) with modular and interchangeable components were engineered and tested to NIOSH-equivalent standards.
IC3D Budmen Face ShieldThe following refers to: 3DPX-013309 The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks...
UCSF Face Shield (Model A)We re-designed a face shield based on the Prusa Face Shield ; Model ID 3DPX-013611) that is fabricated and assembled using a 3D printer and widely available materials (laminated or transparency sheets, rubberbands).
Durable face shield with hoodPlease see remix 3DPX-013565 wrong file uploaded for this submission. Thanks
Minimalist Face Shield Visor - Added Top ProtectionThis minimalist designed 3D printable face shield visor is quick to produce while maintaining durability and strength of the face shield.
The Divine and the MortalThis is a home decor model, it is a divine and mortal statue that can be also gifted to someone.SliSearch lists public model details and links to the original source. It does not host files or verify licences.