Safety mask that we manufacture to collaborate in the fight against COVID19 at
Chosen by shared tags first, then category. Each one links to its own marketplace.
Yet another face shield. Fast and light 3D printed Face shield. Changelog: rev0.6: adjusted autolock, more flexible 28/03/2020 added STEP files! Easy to mount A4 acrylic sheets. Tested with 0,10 to 0,24mm thickness.
File types: STEP STLLicence: Attribution
ThingiverseFreeFile types: STLLicence: Personal use only
ThingiverseFreeLiftup Version of my closed top Face Shield. Lift up to 90º Printed in 2 parts, easy assembly, no tools needed! Part 1 can be printed 3 at once on one 210x210 bed. Total print time for 1 complete set, under 1h30min.
File types: STLLicence: Attribution
ThingiverseFreeThe simple design of face shield headband. To use with clear sheet without any holes. You can use A4/Letter or much wider sheets. Little notches on sheet holder show a centre position for A4 sheet.
File types: GLB STEP STLLicence: Personal use only
NIH 3DFreeThis face shield was designed to be printed quickly and assembled with inexpensive and readily available materials while providing full face protection, comfort and adjustable fit. A fully assembled shield will cost less than $1.
File types: GLB STLLicence: Attribution
NIH 3DFreeThe PAPR Lens-Cuff shield system was designed by bioengineers to meet clinical shortage in these shields.
File types: DWG GLB STLLicence: Attribution
NIH 3DFreeWith more states are reopening and students are returning to school, it is crucial to keep the kids safe. It is hard to wear a face mask for kids, especially during summer time. But a comfortable face shield will help kids stay safe.
File types: GLB STLLicence: Attribution
NIH 3DFreeA simple face shield that can be rapidly cut on a CNC machine out of .25" or thicker HDPE plastic. The clear face shields are attached with a standard 3 ring binder hole pattern so they can be easily made from clear plastic.
File types: DXF GLB STL
NIH 3DFreeThis Face shield is made from office supplies. To create use a standard 3-hole punch to punch holes in a sheet protector. Attach sheet protector to 3-D printed parts. Glue or tape corners. Attach to head with rubber bands.
File types: GLB STLLicence: Attribution
NIH 3DFreeThe face shield is meant to protect healthcare providers from coming in contact with the virus through particulate . The hand band has been designed to be assembled quickly and with a minimal amount of resources.
File types: GLB STLLicence: Attribution
NIH 3DFreeThis device is a general purpose face shield intended for use in the community and is not suitable for use by a healthcare professional or in a healthcare facility or environment, as described in FDA Guidance Enforcement Policy for the...
File types: GLB STLLicence: Attribution
NIH 3DFreeThis shield was produced by the Temple University COVID Assistance Team (TUCAT). The design accepts PET shield film cut with a standard 3D punch.
File types: GCODE GLB STLLicence: Attribution
NIH 3DFreeStrapless face shield utilizing transparency foils with standard 3-hole spacing
File types: GLB STLLicence: Attribution
NIH 3DFreeThe following refers to: 3DPX-013306 The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks...
File types: GLB STLLicence: Attribution
NIH 3DFreeThis is a face shield I created that uses 3 hooks instead of 4, and the measurements match a standard 3-hole punch exactly, increasing ease of use and efficiency, as well as lowering costs dramatically.
File types: GCODE GLB STLLicence: Attribution
NIH 3DFreeThis is a shortened version of for smaller printers This face shield design uses two sets of hole punches to hold a transparency film, or any other clear plastic, to the frame.
File types: GLB STLLicence: Personal use only
NIH 3DFreeThe following refers to: 3DPX-013406 The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks...
File types: GLB STLLicence: Attribution
NIH 3DFreeFile types: DXF GLB STEP STLLicence: Personal use only
NIH 3DFreeThe 3D printable face shield designed by Avid Product Development is optimized for HP Multi Jet Fusion Technology.
File types: GLB STLLicence: Attribution
NIH 3DFreeDuring this COVID-19 pandemic most elective surgeries have been cancelled, which leaves many surgical drapes unused.
File types: GLB STLLicence: Attribution
NIH 3DFreeThis face shield design uses two sets of hole punches to hold a transparency film, or any other clear plastic, to the frame.
File types: GLB STLLicence: Personal use only
NIH 3DFreeThis is a modified version of the Prusa face shield. I wasn't able to source button-hole elastic initially so I made this to work with flat elastic. This could also work with strips of fabric, ribbon, or webbing. 1.
File types: GLB STLLicence: Attribution
NIH 3DFreeRedesigned 3d printed face shield with forehead hood. New design eliminates dog ear style of lateral clear shield attachment points.
File types: GLB STLLicence: Public domain
NIH 3DFreeOur face shield's greatest advantage is that a new visor can easily be created with a 3 hole-punch and transparencies (such as laminate or project film).
File types: GLB STLLicence: Attribution
NIH 3DFreeThis is a single piece face shield that only requires the transparent visor and this 3D Printed headband. No other materials or assembly is necessary.
File types: DXF GLB STLLicence: Attribution
NIH 3DFreeWe have developed a flat pattern face shield that can be compactly shipped and made in communities around the world by CNC, laser cutter, water jet, or stamped.
File types: DXF GLB STLLicence: Attribution
NIH 3DFreeThis is a remix of DtM-v3.0. It has been modified from the DtM-v3.0 in the following ways: A side clip system has been added to the cradle/frame to replace the pegs for an elastic strap with a 3D printed strap.
File types: GLB IPT STLLicence: Public domain
NIH 3DFreeThe 3D Systems face shield frame is designed as a two part 3D printed solution for needed face shield PPE.
File types: DXF GLB STLLicence: Attribution
NIH 3DFreeLimitless Studios has designed its face shield with major advantages that set it apart from other shields on the market.
File types: GLB STEP STLLicence: Personal use only
NIH 3DFreeRemixed for thinner plastic shield (0.1mm) and added tabs to hold down the edges of the plastic. (as noted in picture) Thinner plastic also benifits from bending small flaps on the edges of the plastic shield as it keeps it from bending...
File types: GLB STLLicence: Attribution
NIH 3DFreeThis is the Stratasys design for a face shield (without logo), full details can be found at: Stratasys.com however a brief overview has been provided below.
File types: DXF GLB STEP STLLicence: Attribution
NIH 3DFreeThis is a revised model for the Welch Allyn Retinoscope originally made by Dr. Sigal Yehiam (Pediatric Ophthalmology). The original design did not leave a large enough gap to place the clear shield so I widened the slot.
File types: GLB STLLicence: Personal use only
NIH 3DFreeThe following refers to: 3DPX-013409 The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks...
File types: 3MF DXF GLB STLLicence: Personal use only
NIH 3DFreeI simplified the Covid19 Face Shield in the 3D design software Rhino3D. I created the model to be constructed based on simple curves and simple editing commands.
File types: GLB STLLicence: Attribution
NIH 3DFreeOverview: A minimalist 3D printed face shield frame to accept 8-1/2" x 11" office transparency sheets.
File types: GLB STLLicence: Attribution
NIH 3DFreeThis face shield is an improved version of model 3DPX-013421. It has been modified for more secure shield connection, more secure fastener connection, increased wearer comfort, and to suit two additional hole punch standards.
File types: GLB IPT STLLicence: Attribution
NIH 3DFreeThe following refers to: 3DPX-013309 The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks...
File types: DXF GLB STLLicence: Attribution
NIH 3DFreeAdvantages of this design: * Stackable: it can be printed in multiple copies overnight from a standard printer, just remove the sprues with a wire cutter.
File types: DXF GLB STLLicence: Attribution
NIH 3DFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.
