NIH 3D
DiA Covid face shield
- Creator (as listed at the source)
- Not listed at the source.
- Licence
- CC-BY-NCStated at the source marketplace; SliSearch does not verify licences.
- File types
- GLB STEP STL
- Pricing
- Free
- Published
- Category
- Devices and Hardware
- Downloads
- 81
Overview
The simple design of face shield headband. To use with clear sheet without any holes. You can use A4/Letter or much wider sheets. Little notches on sheet holder show a centre position for A4 sheet. Distance between face and sheet allows comfortable using safety glasses and n95 masks. Also, simple rubberband 5-8mm wide and over 1mm thick is easy to attach and adjust, without loops or knots. The flexibility of the sheet holder allows disinfection under it. Minimal design No holes No loops No knots Variable sheet sizes Easy to adjust the tension Easy to remove with one hand No tight places for disinfection If required, there is an attachable top cover. The shape of the cover allows the headband to flex into the head shape. It also works as a deep sweat drain. Splashes can be prevented with towel paper pieces put inside. More info: Assembly and disassembly:
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
3-Hole Punch Face ShieldThis is a face shield I created that uses 3 hooks instead of 4, and the measurements match a standard 3-hole punch exactly, increasing ease of use and efficiency, as well as lowering costs dramatically.
Easy 3D printed Face ShieldYet another face shield. Fast and light 3D printed Face shield. Changelog: rev0.6: adjusted autolock, more flexible 28/03/2020 added STEP files! Easy to mount A4 acrylic sheets. Tested with 0,10 to 0,24mm thickness.
Medical Surgical Face Shield - No Tools or Hole Punch Needed - 32 Min Print Time! - PPE
Liftup Face Shield with AutolockLiftup Version of my closed top Face Shield. Lift up to 90º Printed in 2 parts, easy assembly, no tools needed! Part 1 can be printed 3 at once on one 210x210 bed. Total print time for 1 complete set, under 1h30min.
EZ Face Shield for Under a DollarThis face shield was designed to be printed quickly and assembled with inexpensive and readily available materials while providing full face protection, comfort and adjustable fit. A fully assembled shield will cost less than $1.
Well-fitting Lens-Cuff System for Powered Air Purifying Respirators (PAPR)The PAPR Lens-Cuff shield system was designed by bioengineers to meet clinical shortage in these shields.
QSD Face Shield for KidsWith more states are reopening and students are returning to school, it is crucial to keep the kids safe. It is hard to wear a face mask for kids, especially during summer time. But a comfortable face shield will help kids stay safe.
CNC Cut Reusable Face Shield DesignA simple face shield that can be rapidly cut on a CNC machine out of .25" or thicker HDPE plastic. The clear face shields are attached with a standard 3 ring binder hole pattern so they can be easily made from clear plastic.
Virus Face Shield Using Office SuppliesThis Face shield is made from office supplies. To create use a standard 3-hole punch to punch holes in a sheet protector. Attach sheet protector to 3-D printed parts. Glue or tape corners. Attach to head with rubber bands.
3 Hole Punch Minamal Face ShieldThe face shield is meant to protect healthcare providers from coming in contact with the virus through particulate . The hand band has been designed to be assembled quickly and with a minimal amount of resources.
Minimum Viable Product Face Shield v1This device is a general purpose face shield intended for use in the community and is not suitable for use by a healthcare professional or in a healthcare facility or environment, as described in FDA Guidance Enforcement Policy for the...
Temple University COVID Assistance Team Face ShieldThis shield was produced by the Temple University COVID Assistance Team (TUCAT). The design accepts PET shield film cut with a standard 3D punch.
Aeroshield Face ShieldStrapless face shield utilizing transparency foils with standard 3-hole spacing
Magarin Dynamics PPE Face Sheild
3DVerkstan 3D printed face shield head bandThe following refers to: 3DPX-013306 The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks...
Covid-19 Face Shield (Short version)This is a shortened version of for smaller printers This face shield design uses two sets of hole punches to hold a transparency film, or any other clear plastic, to the frame.
Dti v3 Nerys PMN Vase Mode RemixModified design from Nerys to make the attachement at the underside of the brim stronger.
Business Unit LeaderWe are submitting with the hope of getting a review of the design for clinical use as we are donating these to local hospitals and other places in need of PPE.
3D Printed Face Shield (MITRE)The following refers to: 3DPX-013406 The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks...
Rapid Production Face shield - laser cut visor - 35min 3D print time
Avid 3D Printable Face Shield for HP Multi Jet FusionThe 3D printable face shield designed by Avid Product Development is optimized for HP Multi Jet Fusion Technology.
Stopgap Surgical Hood (MITRE)During this COVID-19 pandemic most elective surgeries have been cancelled, which leaves many surgical drapes unused.
Covid-19 Face ShieldThis face shield design uses two sets of hole punches to hold a transparency film, or any other clear plastic, to the frame.
Prusa Remix - Elastic Tension LocksThis is a modified version of the Prusa face shield. I wasn't able to source button-hole elastic initially so I made this to work with flat elastic. This could also work with strips of fabric, ribbon, or webbing. 1.
Durable faceshieldRedesigned 3d printed face shield with forehead hood. New design eliminates dog ear style of lateral clear shield attachment points.
OPP Face ShieldOur face shield's greatest advantage is that a new visor can easily be created with a 3 hole-punch and transparencies (such as laminate or project film).
Injection Moldable Face Shield with Forehead ProtectionPPE Face Shield with Forehead Protection was extensively reviewed and approved by infectious disease experts, clinicians, and engineers.
Slant 3D Protective Face ShieldThis is a single piece face shield that only requires the transparent visor and this 3D Printed headband. No other materials or assembly is necessary.
Covid-19Shields.comWe have developed a flat pattern face shield that can be compactly shipped and made in communities around the world by CNC, laser cutter, water jet, or stamped.
DtM-v3.0-BS2.3 Face ShieldThis is a remix of DtM-v3.0. It has been modified from the DtM-v3.0 in the following ways: A side clip system has been added to the cradle/frame to replace the pegs for an elastic strap with a 3D printed strap.
3D Systems Face Shield Frame - High Capacity SLS NylonThe 3D Systems face shield frame is designed as a two part 3D printed solution for needed face shield PPE.
Swedish Face ShieldLimitless Studios has designed its face shield with major advantages that set it apart from other shields on the market.
Face Shield: RemixRemixed for thinner plastic shield (0.1mm) and added tabs to hold down the edges of the plastic. (as noted in picture) Thinner plastic also benifits from bending small flaps on the edges of the plastic shield as it keeps it from bending...
Face ShieldThis is the Stratasys design for a face shield (without logo), full details can be found at: Stratasys.com however a brief overview has been provided below.
Welch Allyn RetinoscopeThis is a revised model for the Welch Allyn Retinoscope originally made by Dr. Sigal Yehiam (Pediatric Ophthalmology). The original design did not leave a large enough gap to place the clear shield so I widened the slot.
Prusa Protective Face Shield RC3 US versionThe following refers to: 3DPX-013409 The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks...
Covid19 Face Shiled_SimplifiedC19YYI simplified the Covid19 Face Shield in the 3D design software Rhino3D. I created the model to be constructed based on simple curves and simple editing commands.
Ultralight Face Shield Frame for Rapid DeploymentOverview: A minimalist 3D printed face shield frame to accept 8-1/2" x 11" office transparency sheets.
Face shield, 3D printable. For 2-hole, 3-hole, and 4-hole paper hole punch standards.This face shield is an improved version of model 3DPX-013421. It has been modified for more secure shield connection, more secure fastener connection, increased wearer comfort, and to suit two additional hole punch standards.
Safety maskSafety mask that we manufacture to collaborate in the fight against COVID19 atSliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.