Printables
2.5" HDD/SSD External case
- Creator (as listed at the source)
- Ratchet Finesse
- Licence
- Creative Commons — AttributionStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Computers
- Likes
- 123
- Downloads
- 1,342
Overview
Made this hard drive case to compliment my Orange Pi 3 LTS case. The cable I use with this is a Startech SATA to USB 3.0 adapter.
While not a rugged case. It's more or less designed to add a little bit of protection while this Pi and HDD live in my media cabinet.
Print Settings
Printer Brand:
Creality
Printer: Ender-3 S1
Rafts:
No
Supports: No
Resolution:
0.2
Infill: 15
Filament: Sunlu PLA Silver
Notes:
No supports! I was able to get the notch in the lower case to print without supports.
Category: Computer
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Protective Hard Drive CaseMaximum HDD dimensions: Length 148 mm Width 102 mm Height 27 mm HDD is attached from bottom with a 95.25 mm by 44.45 mm screw pattern.
2230/2242/2260 to 2280 m.2 adapter ssdRemixed from : Easier to print, removed unneeded material, added chamfers.
Xbox 360 Slim 2.5" HDD/SSD adapterAdapter that will let you use a standard (~100mm x 70mm x 7mm) 2.5" HDD or SSD in a modded Xbox 360 Slim (aka Xbox 360 S). Just slide the drive in, and then plug into your 360. Be sure to pay attention to the orientation of the plug.
5.25" bay to 2x 2.5" SSD slot adapterVery basic adapter to mount two 2.5" SSD drives in a common 5.25" drive bay. You can use the modifier mesh to remove top and bottom surfaces in those areas and save both time and filament.
2,5" to 3,5" HDD/SSD adapterI could not find the right adapter. That's why I designed this for my "be quiet" case. I tried to keep it as simple as possible. It should work for other 3.5 "bays of course.
Raspberry Pi 4 case with 2.5 HDD(SSD) mountThis is my second case for RPI4 (previous: Now I used 40x40x10 fan, or can be used 40x40x20 fan. Print Settings Printer Brand: Printer: Ender 3 Supports: Doesn't Matter Creality PLA Black and white Category...
2.5" Drive enclosureThis is a case that converts and internal 2.5" SSD or HDD to an external storage device with the apropriate adapter. The case has a few places where you can write a label.
Protective Storage Case for 2.5-Inch Hard DrivesSupport material is required for both the body and the lid , as they contain overhanging parts. Additional Parts Required M3 × 20 mm countersunk screw One of the following hinge pin options: Solid copper wire (maximum diameter 1.6 mm).
USB 3.0 Micro-B Cable Plug Dust CapProtect your data cables with this minimalist dust cap! The USB 3.0 Micro-B connector (the wide one common on external HDDs and SSDs) has many small pins that can easily get clogged with dust or damaged during...
2242 to 2280 dualsided nand ssd
M.2 SSD Kühler für PCI Slotblech.M.2 Kühler für extrem heiße GEN 5 SSD's mit montierten Kühlkörper die sich zwischen GPU und CPU-Kühler befinden. Kühlt um 25grad Celsius runter bei einer Raumtemperatur von 30grad Celsius.
Universal stackable crates with signs and optional inlaysAn universal set of crates of several sizes. These can be stacked together and have slots to add signs to know, whats inside. Signs can either printed from the included files or added with handwritten paper with 29mm width and 28mm length.
PiNAS - The Raspberry Pi NASThis case can be used to build a very compact Raspberry Pi powered two bay network attached storage (NAS). You can leave a tip (button left) if you like my stuff.
Folder Drive
HDD Adapter 3.2I was looking for an adapter to put my 2.5" SSD drive in a 3.5" HDD bay, and found several nice designs, but none that could be screwed in from underneath, so I made one with all modern holes.
SSD Stackers - 2.5" HDDs work too! (Previously "Dual SSD Stackers")SSD Stackers (as well as the old "Dual SSD Stackers") are meant to allow you to stack and mount two (or more, now thanks to SapperSquid's suggestion) 2.5" drives (SSD or HDD) together, and then be mounted in desktop computer cases that...
Laptop supportA remix of the original object from Dagoma, with Thingiverse logo on the side I design it for an HP Notebook
2.5 SSD to 3.5 HDD caddy adaptorhard drive adaptor to fit a 2.5 inch SSD or laptop drive into a 3.5 inch desktop PC bay just added mk2 which has holes for mounting flat :) hope you find i useful
5.25" bay to 2x 2.5" SSD slot adapterVery basic adapter to mount two 2.5" SSD drives in a common 5.25" drive bay. You can use the modifier mesh to remove top and bottom surfaces in those areas and save both time and filament.
2.5 Inch HDD StandHere's the 2.5 Inch HDD stand in 6 or 8 drive options. There's honeycomb vents on the sides to keep temperatures down and to minimise print material while still maintaining good strength.
2.5'' Drive PCI Slot mounting bracketAdded more material to the bracket by refract for more stability. Timelapse Video:
2.5 inch SSD to 3.5 inch Hard Drive Bay AdaptorBracket to mount a 2.5" Hard Drive or an SSD Hard Drive into a 3.5" hard drive bay
Customizable PC 5.25" Bay Frame and HDD/SDD Adapter
Adapter for two 2.5"ssd to 5.25" bay.I have old "but good" pc case with no spaces for 2.5" drives. So i design an adapter from 5.25" to two 2.5". You have to drill holes for discs with 3,5mm dril.
Extended 2.5 to 3.5 SSD/HDD AdapterBased off by Clax, after I made one I realised I needed the other two mounting holes on a 3.5 HDD to fit my drive bays in my Antec P182 case. This is the result!
HDD Adapter 2.5 or 3.5 to 5.25''Based on this is an adapter for mount in the 5.25'' (cd-rom) bay. It´s valid for 2.5'' and 3.5'' HDD (SATA, SSD or IDE)
SSD Expansion Slot MountFor mouting of 2.5'' SSDs and HDDs to a free expansion slot in your PC.
2.5" HDD or SSD Storage Holder 1Tb>Storage Holder for 10 PCs 2.5" HDD or SSD 9.5x69,85x100,5mm 1Tb - 5 Tb
2x and 4x SSD MountA mount for 2 or 4 2,5'' SSD/HDD.
PCI harddisk bracketPCI bracket for 2.5inch Solid State Drive
Low Profile PCI Slot 2.5" HDD/SSD MountI wanted to use a low profile PCI slot to mount a 2.5" SSD in a 2U case for my Unraid server but I didn't see any manufactured nor any available to print out. So, I designed my own.
SSD Adapter 2.5" to 3.5"
Easy 3.5" HDD StackI made this easy printable HDD stack encloser for my NAS (Network Attached Storage) at Home. The stack holds up to 8 disks. The design supports hot swapping drives without loosing screws.
SSD drive bay adapter - 1 hour printDo you want to put a new 2.5 inch SSD in your trusty old desktop computer, but all it has are 3.5 inch HDD bays (or even those old floppy disk drive bays)? This adapter is what you need.
triple SSD to 3.5" HDD adapterThis is a triple SSD to 3.5" HDD Adapter. Attention! The height is more than one standart Slot! The SSD´s have enough Space to get them cooled with ahFan from behind and the Power and Data Cables fit.
SSD BracketBracket for fitting a 2.5" SSD into a 3.5" HD bay
Adapter for HDD/SSD 2.5 to 3.5 positionAdapter for HDD/SSD 2.5 to 3.5 position. * You need M3x16 screw.
PCI Bracket 2.5in HDD/SSD drive bayThis is a very simple design to add additional 2.5" HDD/SSD to PC. This design requires [omdl] and the [PCI Bracket Generator]. All of the source is present, so modify it to meed your needs if you wish.
2.5 inch to 3.5 hard drive adapter for hotswap drivesThere are a number of 2.5" to 3.5" hard drive brackets on thingiverse, but ALL the other ones don't seem to be for hotswap server bays with drive caddies (because they don't mount the SSD in the required position).
SSD Storage Boxhere is ja little Storage box for 5 SSD. I print in PLASliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.