Printables
2,5" to 3,5" HDD/SSD adapter
- Creator (as listed at the source)
- ZORK 77
- Licence
- Creative Commons — Attribution — Noncommercial — Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Computers
- Likes
- 151
- Downloads
- 1,480
Overview
I could not find the right adapter. That's why I designed this for my "be quiet" case.
I tried to keep it as simple as possible.
It should work for other 3.5 "bays of course.
Print instructions
Category: Computer Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0,2
Infill: 20%
Filament: Material4Print ABS black
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
PCI harddisk bracketPCI bracket for 2.5inch Solid State Drive
SSD Adapter 2.5" to 3.5"
Thermaltake Max 1562 2.5" 6 bay SSD HDD SATA 5.25" Adapter Replacement Tray / Bay / Insert!Animation of Insert Note: I specially designed this to lock in place using old springs that you've likely got lying around from replacing weak print-bed springs, or the spring near your extruder knob.
3.5" to 2.5" HDD adapteran adapter to perfictly fit 2.5" ssd's or hdd's to 3.5" disk bays
HDD Adapter 3.2I was looking for an adapter to put my 2.5" SSD drive in a 3.5" HDD bay, and found several nice designs, but none that could be screwed in from underneath, so I made one with all modern holes.
2.5 SSD to 3.5 HDD caddy adaptorhard drive adaptor to fit a 2.5 inch SSD or laptop drive into a 3.5 inch desktop PC bay just added mk2 which has holes for mounting flat :) hope you find i useful
2.5'' Drive PCI Slot mounting bracketAdded more material to the bracket by refract for more stability. Timelapse Video:
Customizable PC 5.25" Bay Frame and HDD/SDD Adapter
Extended 2.5 to 3.5 SSD/HDD AdapterBased off by Clax, after I made one I realised I needed the other two mounting holes on a 3.5 HDD to fit my drive bays in my Antec P182 case. This is the result!
HDD Adapter 2.5 or 3.5 to 5.25''Based on this is an adapter for mount in the 5.25'' (cd-rom) bay. It´s valid for 2.5'' and 3.5'' HDD (SATA, SSD or IDE)
triple SSD to 3.5" HDD adapterThis is a triple SSD to 3.5" HDD Adapter. Attention! The height is more than one standart Slot! The SSD´s have enough Space to get them cooled with ahFan from behind and the Power and Data Cables fit.
Adapter for HDD/SSD 2.5 to 3.5 positionAdapter for HDD/SSD 2.5 to 3.5 position. * You need M3x16 screw.
Dell 1920/2950/R610/R710/Etc HDD CaddyA printable HDD caddy for Dell PowerEdge servers, styled after the front of an R710. This one's for 2,5" drives.
HDD/SSD 2.5 to 3.5 adapter (V2 compact)HDD/SSD 2.5 to 3.5 adapter (V2 compact) Hard drive adaptor to fit a 2.5 inch SSD or laptop drive into a 3.5 inch desktop PC bay.
Small HDD adapter 3.5 Inch to 2.5 Inch
Dual SSD Holder 2x2.5" to 3.5" v3.3Dual-Bay SSD 2.5in to 3.5in SATA Hard Drive Mounting Bracket
HDD/SSD 2.5 to 3.5 adapter (V1)Hard drive adaptor to fit a 2.5 inch SSD or laptop drive into a 3.5 inch desktop PC bay V2 compact:
Modified 2.5" to 3.5" adapter tray for Microserver caddyI modified Apexio's tray design as his one caused my drives to sit 2mm too high making the SATA connector slightly out of alignment with the slot.
HDD Stackable Tray with base, lid, SSD, fan support and locking pin support
Modified 2.5 to 3.5 SSD / HDD AdapterDifferences from original: Added extra holes to acomodate for Floppy drive bay installation. -original only supports 3.5 HDD bay. Side walls now have full enforcement, via 45 degree bracket. -much stronger and better longevity.
2,5" to 3,5" SSD/HDD adapter
2.5 in to 3.5 in HDD AdapterMany SSD drives and HDD's from notebooks are 2.5" form-factor drives. Most desktop machines are designed for 3.5" form-factor drives.
2.5" SSD/HDD to 3.5" adapter for hot swap server baysI didn't see many good adapters for mounting a 2.5" hard drive in a hot-swap bay that doesn't have support on the bottom for SSDs, so I designed this one.
3.5" HDD & 2.5" SSD to 5.25" trayTo mount HDD or SSD in the 5.25" bay. The previous one doesn't work very well. Any setting will be fine as long as it strong enough. Infill 40% should be good. No support needed.
Dell Optiplex Dual Drive Caddy
HP ProLiant Gen8/Gen9 2.5" Dummy Drive CaddyFollow the collection for new rack modules and updates Added a modded version that uses a filament cutting as hinge instead of a screw.
Disk adapter 3.5" to 2.5"SSD or HDD adapter from 3.5" to 2.5" drive. You are going to need 4 countersunk screw M3x6mm for mounting drive to the 3D print If your drive needs the connectors to be in the same position as those on a 3.5-inch drive, it won't be...
2.5" SSD to 3.5" HDD Triple Drive Caddy Adapter, ToolessThis adapter allows you to convert a 3.5" drive bay into a triple 2.5" SSDs/HDDs drive caddy. Unlike bolted adapter designs, you can easily replace individual drives without unmounting the entire triple drive...![Modular ITX/DTX/mATX/ATX/SSI-EEB/SSI-CEB/EATX/XL-ATX mainboard frame/tray [Updated 2026-07-19], a preview image from Printables](/previews/printables/35720-0/card-b4b4aad236061037.webp)
Modular ITX/DTX/mATX/ATX/SSI-EEB/SSI-CEB/EATX/XL-ATX mainboard frame/tray [Updated 2026-07-19]A simple modular PC mainboard frame/tray system intended for open-air or custom enclosure PC builds.
3.5" to 2.5" adapters3.5" to 2.5" adapters, made for mounting 2.5" devices to 3.5" mounts. The bottom drive can also be mounted on the bottom with counter sunk screws.
2230/2242/2260 to 2280 m.2 adapter ssdRemixed from : Easier to print, removed unneeded material, added chamfers.
1×5.25" Optical Disk Drive Bay to 4×2.5" up to 15mm thickThis print is a conversion from now mostly useless optical drive bays (discs/DVD/CD bays), AKA 5.25" drives.
Xbox 360 Slim 2.5" HDD/SSD adapterAdapter that will let you use a standard (~100mm x 70mm x 7mm) 2.5" HDD or SSD in a modded Xbox 360 Slim (aka Xbox 360 S). Just slide the drive in, and then plug into your 360. Be sure to pay attention to the orientation of the plug.
AirFlow 3.5" to 2.5" SSD MountA lightweight, Open-frame 3.5" bay adapter designed to securely mount a standard 2.5" SSD or HDD.
3x 2.5" SSD/HDD to 3.5" bay adapter (Version C, Mesh Fixed)I only repaired the mesh, all the credit and gratitude goes to the OP.
2.5 inch to 3.5 SSD adapter cheap versioncheaper version
7mm to 9.5mm HDD SSD SpacerAllows you to use a 7mm thick 2.5" HDD or SSD in a device which expects a 9.5mm thick one.
3.5" HDD to 5.25" Bay Adapter / Adaptér HDD 3,5″ do pozice 5,25″3.5" HDD to 5.25" Bay Adapter A simple adapter frame for mounting a standard 3.5" hard drive into a 5.25" drive bay.
2242 to 2280 dualsided nand ssd
2.5" HDD / SSD to 3.5" HDD Bay AdapterThis adapter allows you to put a laptop style hard drive or an older SATA SSD where a 3.5" HDD typically goes. My use case was to install an SSD in a Lenovo ThinkCentre M800 SFF.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.