Thingiverse
Case for LilyGO T-Display C5 + 3000 mAh LiPo
- Creator (as listed at the source)
- phodara
- Licence
- Creative Commons - Attribution - Non-Commercial - Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Computer
Overview
This is a compact 3D-printable enclosure designed specifically for the LilyGO T-Display C5 with an internal 3.7V 3000mAh. Please read PDF for BOM and build instructions. PocketProwler -Wifi and Bluetooth Scanner A good first project for this case is my PocketProwler — an open-source WiFi + BLE scanner that turns the T-Display C5 into a pocket network analyzer. Prebuilt firmware is available, so you can just download and flash it, no toolchain needed:
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
ESP32 Marauder v8 Case (AliExpress Clone)A two-part protective case for the “ESP32 Marauder v8” boards sold on AliExpress, DHGate, etc - the ESP32 Marauder clones, not the official hardware. This case is designed around the Chinese clone of the ESP32 Marauder v8.
Lilygo T-Beam V1.x TB1 Case by Alley CatCommercial Use and Attribution Notice: Alley Chat TB1 © 2024 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 .
10" PLA Server Rack with Shelves – 100% Infill, EIA Spacing10" PLA Server Rack with Shelves – 100% Infill, EIA Spacing Description: A robust 3D printable 10-inch server rack designed with standard EIA 19" rack spacing, scaled for compact setups.
2U 10-Inch Rack Mini-ITX Case — Extended Depth, ATX Passthrough, Dual Fan & Handles (Remix)2U 10" rack Mini-ITX remix — 240mm depth, ATX passthrough, dual Noctua 60mm intakes, cable passthrough & rack handles.
Raspberry Pi Zero 2W Case for Waveshare Ethernet / USB Hub HAT (20416) – Ventilated, Full Port AccessThis custom enclosure is designed for the Raspberry Pi Zero 2W bundled together with the Waveshare Ethernet / USB Hub HAT (model 20416).
ESP32 WROOM-32 Snap-Fit Case – USB-CESP32 WROOM-32 Snap-Fit Case with Print-in-Place Buttons A compact, ventilated and completely tool-free enclosure for an ESP32 WROOM-32 USB-C development board.
CO2 Sensor TTGO 45-Degree Desktop StandCO2 Sensor TTGO 45-Degree Desktop Stand A modified 45-degree desktop stand and case designed for the LilyGO TTGO T-Display ESP32 and the Sensirion SCD30 CO2 sensor.
LilyGO T-Display C5 Case + LiPoLilyGO T-Display C5 Case Once you print the case download my firmware for the Wifi and Bluetooth scanner here: This is a compact 3D-printable enclosure designed specifically for the LilyGO T-Display C5 with an internal 3.7V 3000mAh LiPo...
Raspberry Pi 5 + Pineboards AI Bundle CaseThis enclosure was designed specifically for the combination of a Raspberry Pi 5 and the Pineboards AI Bundle (Hailo-8L + NVMe SSD adapter) under heavy load, with an active fan on both sides.
TBeam BPF EnclosureA case for your 144mhz 2m TBeam
Sensor & IoT Wall Enclosure – Customizable PCB Case STLNeed this enclosure in different dimensions? Create a version that fits your own PCB and sensor here: This free STL is an example configuration of a 3D printable wall enclosure for sensors, IoT electronics and custom PCB projects.
Case for LilyGO T-Display C5 + 3000 mAh LiPoThis is a compact 3D-printable enclosure designed specifically for the LilyGO T-Display C5 with an internal 3.7V 3000mAh
TP-Link AC750 Router 10" Lab Rax Rackmount CaseThis is a custom 3D printed rackmount case for a TP-Link AC750 Wireless Dual Band Gigabit Router, designed specifically for the 10-inch Lab Rax rack system. The model was designed from scratch in Autodesk Fusion 360.
10RackCore – 2U 6-Gang PDU for 10-Inch RackThe 10RackCore 2U 6-Gang PDU is a compact power distribution enclosure designed specifically for 10-inch rack systems .
Project BoxThis compact and practical Project Box (105mm × 31mm × 140mm) is designed for housing electronic circuits, DIY projects, microcontroller systems, sensors, automation devices, power modules, and custom hardware applications.
LILYGO T-Beam S3 Core Mount for Junction BoxThe LILYGO T-Beam S3 Core board lacks standard mounting holes. I designed this two-piece mount to securely install the board inside a standard electrical junction box without modifying the PCB.
The Ultimate box makerThe file include now the Panel Maker. this project... My first try with OpenScad, the box is fully customizable. I hope you will enjoy with it, and will show us many boxes made with.
Label Slider - (NES)Label Slider (NES) After you 3d printed the parts and finished the below tutorial you will have a automatic slideshow of your favorite NES cartridge labels.
PINE A64 / A64+ computer caseCase for PINE A64 and A64+, the $15 64-Bit Single Board Super Computer - see the Kickstarter page for more information. Case consists of two parts, top and bottom.
LASERBEAMThis new concept idea and quick start will help you to build a low cost laser beamer! It can project laser silhouettes, stencil art, logo's, text.... and more!
Raspberry PI3 Housing, Case, NAS, Server with 0.96 OLED Display showing stats (plus 40mm fan Version/passive cooling Version/DIY top)
USB Flash Drive CasingRather than spending a large chunk of money for the latest high capacity flash drives. You can find bare flash drives (just the circuit board and head) for cheap.
Modular Raspberry enclosure, for MeanWell power supply - suitable for 10" rackThis is a modular enclosure suitable for 10" rack or as stand alone version. It can carry a MeanWell PSU. It is prepared for a PS-25-05 or a PS-15-05.
Additive Drive Storage SystemExternal Drive Storage for use as Direct or Network accessed devices. Stack-able Trays Interlock to allow expansion. This is designed to be a NAS box. Tray cases accommodate Optical drives as well.
Squeeze Pi Enclosure
TOF400C VL53L1X Time-of-Flight Sensor BoxThis Box is made for the TOF400C VL53L1X. The box has two holes for a 1-mm nail and a slot for a cable tie. The box must be glued.
XY-LPWM3 case assemblyIt's the original, and superb, model files re-oriented and ready to print with buttons in place. This is for those who have their printer dialed in and can print/pass OrcaSlicer's tolerance test (from 'handy models') with 0 or 0.05 mm...
zx82net Ultimate Parametric Rugged Box - Snap Closure
6" Rack Enclosure, CustomizableThis is a rack enclosure that will fit 6" components such as these: More to follow, together with a customizable component The code is now also available here: It is designed for the 20x20 extruded aluminium profile, but a profile can also...
Anet A8 - External lcd enclosure v3.2External case for the lcd module with buttons of the Anet A8. Print the files at the layer height you want, at 0.28 infill 5% it needs nearly 4 hours for the front and nearly 1 hour for the supports.
Ender 3 External Electronics Case V2Ender 3 External Electronics Case V2 ------------------ >This case is a two piece sliding design for easy access to wiring, with a push button quick release for fast toolless access.
ESP32 Screwless EnlosureThis ESP32 DevKit enclosure encloses the entire board including the pins. Built in stand-off's ensure the board cannot move once enclosed. The lid clips on securely but can be opened easily.
Raspberry Pi Enclosures - 4B, 3B, 3B+, Zero W, 2.5" HDDModels ==================== * BOM Complete material list with links here * * 3D Models The PI models can be found here: 3D Models * * Raspberry Pi rpi4b - Enclosure (rpi4b) This is a plain enclosure for Raspberry Pi 4B.
Ender 3 External Electronics Case (Enclosure Mounted)A remix of by MrClown. While the original case is intended as a standalone unit, this remix is intended to be mounted on top of an enclosure such as a Lack enclosure, with all the wires running down through holes in the surface below (I...
Customizable Project Box With Lid ScrewsThis is an updated version of my previous project box that uses screws rather than using an interference fit to secure the lid. If you use one for your project, let me know in the comments.
Creality CR-10s Pro EnclosureEnclosure design is usable for any printer, if you want a different size contact me. The SolidWorks files are up now Designed for the Creality CR-10S Pro, fresh air ducting to keep the electronics cool in the hot enclosure.
6" Rack, Raspberry Pi B6" Rack for Raspberry PI B. For the Raspberry Pi 3 Model B: See also: The code is now also available here: This is a work in progress.
Corner or bracket for printer enclosures made with PVC tubesThis corner will fit on 1/2" Schedule 40 PVC conduit from Home Depot or any other hardware store. To get a full enclosure, print 8 of them.
6" Rack, Customizable CabinetThis is a custumizable 6" rack cabinet that will fit: Others in the 6" rack series: The code is also available here:
(OLD) V2 Electronics for Smart 3D Printer Enclosure - TOUCHSliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.