Thingiverse
Lee sizer bullet chute
- Creator (as listed at the source)
- Krung
- Licence
- Creative Commons - Attribution - Share AlikeThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- 3MF
- Pricing
- Free
- Published
- Category
- Sport & Outdoors
- Downloads
- 19
Overview
If you are tired of sizing your bullets and having the push the lid of your Lee bullet container, this chute will make a gentle curve and drop the bullet out at an angle, letting the fall where you want to. Print the part and a mirror part. Glue together and reinforce with zip ties if needed. The part that goes over the sizing die can be clamped on to the die, using an adjustable hoze tie to really get it to stay on there. Works with 500 gn .458. I haven't tried 357/9mm yet. Theoretically, a 16 mm electrical conduit can be inserted in the end, if you want to build a marble run track.
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
DIY Low Powder & Low Primers Sensor with Buzzer for Lee Precision pressesπ― LOW PRIMERS & LOW POWDER SENSOR WITH BUZZER DIY Safety Alarm System for Lee Precision Reloading Presses Never risk running out of primers or creating a squib load due to an empty powder hopper again!
Powder Measure Kit With StandFull set of reloading scoops matching the Lee Powder Measure Kit. These scoops were designed to be accurate and easy to print. Print them face down with support ONLY on the scoop to ensure dimensional accuracy.
25-06 Ammo Box - 100 Round - Stackable25-06 Ammo Box - 100 Rounds - Compact and Secure Tired of flimsy, bulky ammo boxes? This is a rugged, compact, and efficient storage solution for your ammunition.
30 Carbine Ammo Box - 100 Round - Stackable30 Carbine Ammo Box - 100 Rounds - Compact and Secure Tired of flimsy, bulky ammo boxes? This is a rugged, compact, and efficient storage solution for your ammunition.
460 S&W Ammo Box - 25 Round - Small460 S&W Ammo Box - 25 Rounds - Compact and Secure Tired of flimsy, bulky ammo boxes? This is a rugged, compact, and efficient storage solution for your ammunition.
Lee Benchplate Mount Adapter for Pre 82 MEC JrThis adapter is designed to fit the Lee Precision Bench Plate mounting system and allows a MEC Jr. reloading press (pre-1982 bolt pattern) to be securely mounted using the existing Lee bench plate.
Casing HolderThis is made to sit on a scale while you put a 223 casing in it and weigh your powder and therefore the casing doesn't fall over.
Lee Classic Turret Press Brass KickerBrass Kicker for the Lee Classic 4 Hole Turret Reloading Press. Snaps in between the right two posts, easiest to install from ram side with ram at bottom of stroke.
Pegboard Mount for Hornady Lock'N'Load Bullet TubesI designed this to fit my Hornady 9mm bullet tubes. I'm not sure if the .40 or .45 bullet tubes are the same diameter. Mount on 1"-spacing pegboard using my Lockable Pegboard Rivet . Holds three bullet tubes.
Lee Autodrum Oversize Powder HopperLee Autodrum Oversize Powder Hopper Adapter β Build Your Own Custom Size! > β‘ Don't see your tube size in the list? No problem β just message me your measurements and I'll design a matching adapter set for you, express.
Vortex Powder Funnel & Reloading Trays β .378β³ & .473β³ Case Head (.308 Win, 6.5 Creedmoor, 223. Rem., etc)Vortex Powder Funnel β .378β³ (9.6 mm) & .473β³ (12.01 mm) Case Head A 3D-printable vortex powder funnel designed for fast and smooth powder transfer when reloading rifle cartridges.
Lock n Load Die HolderA four-position die holder compatible with Hornady Lock-N-Load style bushings.
SuperTrickler ST101 Gen 3 Powder Hopper CapA cap for the powder hopper on the SuperTrickler ST101 Gen 3. A notched version and a plain version of the cap are included in the print file.
Primer Flipping TraysIMPORTANT: Get the latest updates for this model here on PrusaPrinters. In 2021, all updates and uploads of new models were moved to PrusaPrinters, of course still free and under the same conditions...
openPrimerFiller - DIY primer fillerPrimer filler for Hornady & Dillon pickup-tubes. thanks to MA-Gladiator from wiederladeforum.de for inspiration! *VIDEOS* *PARTS NEEDED* - Speedcontroller with integrated on/off switch - 9v battery clips - Motor or similar.
RADIN-LOADER (automatic powder trickler)[12/04/2022] On the radin2 program from hawk86, it may be too big to compile (unknow reason), you'll have to remove one of the 3 languages in the program to be able to compile/upload.
Rifle Case FeederCurrently working on a completely different design and wonβt be making any updates to this one. This is a remix of GolluB's case feeder remixed to work for Rifle Cartridges too.
Reloading Tray , 308/3006 , Honeycomb style , 5x10Honeycomb shaped reloading tray. Holds upto 50. enjoy.
Lee reloading die retaining nut wrenchETA 9/12/2020: I saw a similar tool sold by an online reloading site, for about $4 + shipping, and figured that I could just make my own, so I guess this is a "remix".
Lee Die Locking Ring WrenchWrench for the newer style Lee locking rings. Fit is pretty tight. If you have problems with it being too tight, bump up the size by a percent or two. It will flex if you try to torque it too much; it's a plastic wrench after all.
Hornady headspace gauge holder pegboard reloadingHolder for Hornady headspace gauges and Allen wrench. Can be installed on pegboards or drilled to be wall mounted.
Brass MarkerJig to mark your brass to easily find it at the range or during competition. Only needs supports for the overhanging hinge pieces. The holes print just fine without any support. YM For the hinge I used some 6mm carbon rod.
.25-06 Remington Stacking Loading Block - Solid and Vase ModeLabelled loading block with both Solid and Vase Mode versions.
.338-06 Stacking Loading Block - Solid and Vase ModeLabelled loading block with both Solid and Vase Mode versions.
308 Reloading Stepped Tray with Bullet TrayDesigned for reloading qty 5 match or hunting rounds at a time. This stepped tray is designed with deeper pockets than regular stepped trays, offering greater stability holding the cases that are being reloaded.
25X47mm LapuaLabelled loading block with both Solid and Vase Mode versions.
7.63X25mm Stacking Loading Block - Solid and Vase ModeLabelled loading block with both Solid and Vase Mode versions.
26 Nosler Stacking Loading Block - Solid and Vase ModeLabelled loading block with both Solid and Vase Mode versions.
28 Nosler Stacking Loading Block - Solid and Vase ModeLabelled loading block with both Solid and Vase Mode versions.
.277 Fury Stacking Loading Block - Solid and Vase ModeLabelled loading block with both Solid and Vase Mode versions.
27 Nosler Stacking Loading Block - Solid and Vase ModeLabelled loading block with both Solid and Vase Mode versions.
30 Nosler Stacking Loading Block - Solid and Vase ModeLabelled loading block with both Solid and Vase Mode versions.
.35 Whelen Stacking Loading Block - Solid and Vase ModeLabelled loading block with both Solid and Vase Mode versions.
6.8X51mm Stacking Loading Block - Solid and Vase ModeLabelled loading block with both Solid and Vase Mode versions.
.30 Luger Stacking Loading Block - Solid and Vase ModeLabelled loading block with both Solid and Vase Mode versions.
33 Nosler Stacking Loading Block - Solid and Vase ModeLabelled loading block with both Solid and Vase Mode versions.
.30 Mauser Stacking Loading Block - Solid and Vase ModeLabelled loading block with both Solid and Vase Mode versions.
6.5X47mm Lapua Stacking Loading Block - Solid and Vase ModeLabelled loading block with both Solid and Vase Mode versions.
7.65X21mm Stacking Loading Block - Solid and Vase ModeLabelled loading block with both Solid and Vase Mode versions.
9mm Chamber FlagsA simple 9mm chamber flag for chamber flagging purposes.SliSearch lists public model details and links to the original source. It does not host files or verify licences.