Thingiverse
Mini FPV Hovercraft
- Creator (as listed at the source)
- pangofpv
- Licence
- Creative Commons - AttributionStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Hobby
- Likes
- 490
Overview
This my first attempt to make a mini RC FPV hovercraft. This build require mini FPV drone electronics. In fact, I converted my mini 2 inch FPV drone into this Mini Hovercraft. The aim of this design is to be simple and can easily be printed with no or minimal support. Also it can be printed on 3D printer with small print bed like Ender 3. The final outcome is surprisingly works really well! I really enjoy playing with the mini hovercraft! Please see video in link below to see Mini FPV hovercraft in action! Following are the parts needed for the Mini Hovercraft build: - 16X M2*6mm screw (for bottom skirt) - 8X M3*10mm screw (for body, camera stand and thruster) - More M2 Screws (length depends on motor and propeller you used) - Thin tent fabric or garbage bag (hovercraft skirt) - Cable tie, tape, glue - Wires (for electronics) - 4X 2inch propellers Recommended Electronics - 16mm*16mm FC - 16mm*16mm 4in1 ESC - 4X Brushless Motor (11XX ~ 12XX) *I used Mamba 1105 Motor - FPV Camera + VTX Update -Added Body (Bottom) V1.1 added holes for wires, more spacing for 16x16 board mount -Added Thruster V1.1 **requires no support to print. Slightly heavier than V1.0 (3~4 grams)
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
S3 Pattycake FPV Hovercraft / Tiny WhoovConvert your quadcopter into a hovercraft - introducing the S3 Pattycake FPV Hovercraft! This version uses 6mm brushed motors. Look here for a remix that uses 0603 brushless motors.
MIDJET 195 FPV RACERThis is my first FPV racer design. It flies Great!! Like to see others enjoy it as much as I do!! Feel free to comment or ask questions and please let me see your builds.........
Peon230 - Quadcopter
Racer Plier/WrenchAfter seeing many pliers versions on the Internet, I thought I should make one by myself with a supplementary bracket and including an appropriate wrench.
FPV-Rover V2.0 (RC Tank)It's finally here. Version 2.0 of the FPV-Rover. This is the second version of the FPV-Rover. This one is with 540 motor (brushed and brushless).
FPV RACER 190mm (beta)This quad is based on the sigan 180 quad. The final object will not have the same solidity as the original frame from Video : Beta version of fully printable little racer Design still in progress... All suggestions are welcome.
CC-2 002 cushioncraft, skirtless hovercraft, RC model, 1:25 scale, 3d printed cc2Hello! This is my CC-2 002 cushioncraft model, it is at a 1:25 scale. I designed it all in cad, 3d printed, assembled, finished and sprayed it all.
drunK131Racing Micro quadcopter frame drunK131 Racing quadcopters is something that I really like. I love to design my own frames. Usually, I cut'em with my CNC but this time I wanted to try a printed one!
ARS-5 V1.0 5" Racing Drone
Sayha - X FPV Quadcopter 4" 5" 6"
AESIR II - 2S-8S Li-Ion Endurance DroneEtafri ÆSIR II - An Open-Source, Endurance Quadcopter: 2S-8S Power ÆSIR II is an open-source design concept, allowing users to fully 3D print a high performance, lightweight quad-copter to almost limitless specifications of their choosing.
Mini FPV-Rover (Tank)This is a mini version of my FPV-Rover V2.0 The dimension are 10cm x 10cm x 3cm Intructions and BOM can be found on Instructables Videos on Youtube: Parts to print 70x rubbertrack (only if needed) 2x inner track...
racing drone zmr250
Onyx - Racing Quad Frame 270This is a Quadcopter Racing Frame measuring about 27cm diagonally. I tried to make it a 250 frame, but I had problems with the props - so I scaled it up a bit. It is quite light - about 370g alltogether without the battery attached.
Odonata — Open source nanoAugust 2022 edit: I partnered with Armattan Quads to make the Odonata available in retailers worldwide, so check your favorite retailer that carries Armattan products for it!
ARS-5 V2.0 5" Racing Drone
Tiny whoop Inductrix CaseAdded: two new models for shorter top cases, no writing. : One new model top case 10mm shorter This is a storage/traveling case for the Horizon hobby Blade Inductrix FPV Tiny whoop modified version.
FPV Drone wall mountI have designed this wall mount to display my 5 inch freesyle quad on the wall.
Pico 110 Foldable Micro QuadThis frame was inspired by Ulfindestrom's Foldable Brushed Microquad. When designing this frame, my goal was to create an ultralight, compact, and super strong trainer quad.![The Sanchez [3 Inch Toothpick Style], a preview image from Thingiverse](/previews/thingiverse/3647138-0/card-f08779e1d1684c3a.webp)
The Sanchez [3 Inch Toothpick Style]
Tiny Servo Driven FPV RC Tank - Tiny TrakThis tiny FPV Tank uses Lego tracks driven by servos. To build you need the following: - Two Lego tracks (Lego Part: x939 or 43903 - for best prices) - Two servos (continuous [FS90R] or modify regular) - Receiver of your choice (smaller...![Toothpick Nano Pod Lite [14mm], a preview image from Thingiverse](/previews/thingiverse/3745740-0/card-2011621407da612a.webp)
Toothpick Nano Pod Lite [14mm]ABOUT THE DESIGN ================== This pod is a remix of my own design that is much lighter. The weight is reduced from 4.1g to only 2.4g! A nice side effect is the better ventilation of the VTX.
Pickle Toothpick micro fpv quadcopter frames and accessories
RC FPV airplane - Model V fuselageFree fuselage for testing of the fully 3D printed RC plane model V. Read more: Flight video:
Protection Camera tiltable FPV Super Mini 25mW Eachine TX01 / TX02 200mwHere protection with tilt adjustment for the camera eachine 25mwet TX01 TX02 200 mw. camera eachine TX01 / 25mW: Camera eachine TX02 / 200mw: It takes just two screws M1.6 10mm to secure the two parts
XEVO X210 fully 3D printable 5" Racing Drone/MiniquadInspired by the TBS Oblivion, I designed this racecopter to be very stiff and durable to withstand most crashes. By now, I have put a lot of packs through the drone and I always tweaked and improved the design.
Toronto Micro Marathoner
Firefly
Jinx180 FPV RacerHey guys I'd like to share my new racer frame, the Jinx :D Here's a video of the first flight: UPDATE 3/16/2016 I added new legs without the slit. After flying a few of these frames they consistently broke in that spot.
FPV Drone Racing FrameThis is rev.1 of my 3D printed drone racing frame. Suitable for 5inch propellers and 3S/4S LiPo has a place for "standard" FPV camera and 36x36mm flight controller and PDB (30.5mm hole spacing).
Pickle Canopies for Toothpick style micro fpv quad (14x14 and 19x19)
H125 Micro Quad V1 -7mm/8.5mm Micro SciSky Based (under $50)Looking for an affordable trainer quad that you’ll still enjoy flying after you've mastered your moves? This H125 micro quad might be the right choice.
Zeb'210 FPV Racer QuadcopterZeb'210 FPV Racer Quadcopter - custom frame. Presentation: * Inspired by Sigan's quadcopters design, but whole new design. * Designed for the list of parts here below.
WU TANK MAX - 5 and 6 inch freestyle frame
Drone HolderSimple drone holder that can work with most drones from 3" and up. Make your own drone wall!
Mini Tiny Whoop (Inductrix based mini quad)*New frame version added to accept 8.5mm motors. This is an 84 mm true x configuration mini / micro quad with ducted props.
Tiny Whoop - Mobula 6 - CanopyNew Canopy for TinyWhoop Model 01 fits Foxeer Pico Razer (10mm lens) Model 02 fits Runcam Nano 3 (original Mobula 6) Model 03 fits Runcam Nano 1 (12mm lens) Weight about 1gr Camera angle about 25° For bicolor, change filament after 4...![Nano Pod [14mm], a preview image from Thingiverse](/previews/thingiverse/3547944-0/card-ec2fae80aaf53735.webp)
Nano Pod [14mm]THE GATEHUNTER TOOTHPICK POD ================================ Finally, my first Kabab FPV inspired toothpick style build with a custom pod I designed for the Caddx EOS 2.
M250 Moskito Racer DroneCe châssis est une version Beta pour un quadcopter à base carrée de 250mm de diagonale. Il est prévu pour accueillir des moteur brushless 1806 (4 vis) et 2204 (2 vis) (2300kv en 3S pour ma part).
Eachine TX01 TX02 FPV camera mount with double guard protection cover for Eachine E010, JJRC H36 or FuriBee F36 Tiny Whoop mini dronesThis thing is triple remix based on my last one "Antenna guard protection cover for FPV camera Eachine TX01 TX02 TX03" (Nov 29, 2016) combined with "Eachine E010 FPV" by "Diymik" (Nov 27, 2016) and "whoop camera mount for eachine TX01" by...SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.