Printables
DJI Osmo Action 4/5 Pro Camera Mount/Case
DJI Osmo Action 4/5 Pro Camera Mount/Case This is a camera mount/partial case for the DJI Osmo Action 4/5 Pro with a GoPro-style attachment on the bottom.
- Creator (as listed at the source)
- BrendanFPV
- Licence
- Creative Commons — Attribution — NoncommercialStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- RC & Robotics
- Downloads
- 23
Overview
DJI Osmo Action 4/5 Pro Camera Mount/Case
This is a camera mount/partial case for the DJI Osmo Action 4/5 Pro with a GoPro-style attachment on the bottom.
This print has extra material around the lens to offer some protection and cut-outs to prevent the mount/case from being visible in the corners of the video. It also has a cut-out on the front, allowing you to see and use the front screen. There is extra material where the legs of the GoPro-style mount attach to the body of the case to improve the strength and rigidity. I've also added a recess where the record button is located, meaning you can easily find it and press it through the case.
I designed this to use on the AOS UL7 V5 and other FPV quads, but with the GoPro-style attachment, it should work for plenty of other things.
Read the full description
I recommend printing this in TPU and in the orientation shown in the second picture to prevent the lens protector warping and becoming wider, due to the heat from the print bed.
Disclaimer: I designed this for the Osmo Action 5 Pro, but from my research, it seems like the dimensions are the same for the Action 4, which is why I have labelled it as such. I apologise if it doesn't fit that camera!
DJI Osmo Action 4/5 Pro Camera Mount/Case: DJI_OsmoAction5_Mount_V2.stl
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
AOS UL7 V5 - HGLRC M100 GPS MountAOS UL7 V5 - HGLRC M100 GPS Mount GPS Mount for the HGLRC M100 that slides over the rear standoffs. The standoff tubes are 20mm to match the one I received from IFlight, so I've included a 5mm sleeve/spacer to fill the gap if you aren't...
DJI action 4 case - Mario 5 FPV drone frame.I made this TPU case for my FPV drone, specifically designed to fit the SpeedyBee Mario 5 frame. While it was tailored for the DJI Osmo Action 4 , it should also fit other DJI Osmo Action cameras.
DJI Osmo Action 3, 4 or 5 Pro Rugged Case Box M3x20 screwsDJI Osmo Action 3, 4 or 5 Pro Case box
DJI Osmo Action 6 CASEHello, this is my case for the DJI Osmo Action 6 actioncam. Its designed to fit the Osmo Action 6 with and without a silikon lens cover, but i recommend to use one.
Leopard FPV DroneCompletely modular, designed for durability and sexiness. The ultimate printed 5" frame
Nighthawk & Phoenix FPV DroneATTENTION: This design is straight up antiquated guys. Unless you're a techno archeologist pick one: Imma leave this up because I'm not a historical revisionist but seriously, what are you still doing...
FlyLens 85 - Modular Camera Mount and Battery HolderModular two-piece camera and battery mount for the FlyLens85
Compact Gimbal Vertical Z ( 4th ) Axis Stabilizer
Camera mounts for the Mark4 5 / 7 inch (V1) FPV drone frameThe archive contains 170 models covering most camera types, from 14 mm to 22 mm, including DJI O3 and O4 for the Mark4 7-inch frame (V1).
DJI Osmo Action 3, 4 or 5 Pro - Rugged CaseSupports up to two SD memory cards You will need six M3x30 screws.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.