Printables
AOS UL7 V5 - HGLRC M100 GPS Mount
AOS UL7 V5 - HGLRC M100 GPS Mount GPS Mount for the HGLRC M100 that slides over the rear standoffs. The standoff tubes are 20mm to match the one I received from IFlight, so I've included a 5mm sleeve/spacer to fill the gap if you aren't...
- Creator (as listed at the source)
- BrendanFPV
- Licence
- Creative Commons — Attribution — NoncommercialStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- RC & Robotics
- Downloads
- 6
Overview
AOS UL7 V5 - HGLRC M100 GPS Mount
GPS Mount for the HGLRC M100 that slides over the rear standoffs.
The standoff tubes are 20mm to match the one I received from IFlight, so I've included a 5mm sleeve/spacer to fill the gap if you aren't using the Immortal T antenna mount. The angle also matches the one sent from IFlight - 30 degrees.
I recommend printing this in TPU and in the orientation shown in the third picture, as the GPS holder extends below the standoff tubes.
GPS Mount : AOSUL7V5_GPSMount.stl
Sleeve/Spacer: AOSUL7V5_GPSMountSleeveSpacer.stl
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
DJI Osmo Action 4/5 Pro Camera Mount/CaseDJI Osmo Action 4/5 Pro Camera Mount/Case This is a camera mount/partial case for the DJI Osmo Action 4/5 Pro with a GoPro-style attachment on the bottom.
Leopard FPV DroneCompletely modular, designed for durability and sexiness. The ultimate printed 5" frame
Nighthawk & Phoenix FPV DroneATTENTION: This design is straight up antiquated guys. Unless you're a techno archeologist pick one: Imma leave this up because I'm not a historical revisionist but seriously, what are you still doing...
2.5 inch drone frameA printable whoop frame for your fpv build
Drone StandThis is a 5" fpv/racing drone stand
Drone StandGive your FPV drone a proper place to rest and display! 🚀 I designed this stand for my 7-inch FPV drone as a simple, stable and clean-looking solution for displaying the quadcopter when it is not flying, but you can easily adapt it to...
Goblin FPV DroneNote: A larger version of this drone, able to fit a 20x20mm stack is available: The Goblin FPV Drone I worked hard on this little guy. Poured love into every edge and crevice. Spared no mechanical consideration.
Dragonfly FPV DroneA fully 3D printable and modular 5 inch quad that's quite good at everything, but most notably s e x i n e s s.
Wraith FPV DroneThe Wraith FPV Drone This is a 4/3.5 inch drone frame. Mine is printed using carbon fiber PA6 nylon for the body and ABS for the top. I'll list out the specific electronic and mechanical hardware that I used below.
BreakMe Drone - Complete Frame KitThis is a complete fpv drone frame kit. Here is a list of AIO flight controllers with ESC's from RotorRiot: Print Details: One-click gcode file for MK4S with 0.4 nozzle, 0.2mm layer SPEED profile for cheap...SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.