MakerWorld
Archery Bow String Container
- Creator (as listed at the source)
- artNova
- Licence
- BY-NCStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Sport & Outdoors
Overview
A simple tube to protect your Archery Bow String during transportation
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Miniature Compound BowFully functional miniature compound bow for shooting skewers. Consists of 18 print parts, some M3 screws and nuts and two strings (Total cost ~ 3 - 4 $). A complete list of the parts required is attached in the files.
Customizable OpenSCAD Fletching jigOpenSCAD Fletching jig If you have any suggestions, leave them in the comments or open an issue on GitHub Simple yet effective fletching jig that will adjust to all your needs.
Mathews Engage Limbs (UPDATED)I beefed up the limbs a little to increase strength, also added a hole for a bolt to go through the middle leg as this part kept splitting at the layer lines.
Compact Bow QuiverMy goal was to design a bow quiver which I can use for 3D archery courses and target shooting. I use Pandarus Infinity arrows which are smaller than the hunting arrows with the broadheads... I had to do my own design.
Bowholder using broken arrowsThis simple design uses old broken arrows to make them into a bow rest, giving them a new life after becomming unshootable.
Fletching Jig for Taped FletchingJigs that are made for glued fletching tend to rely on the open time of the glue to get things aligned, or are otherwise complicated by needing to hold the feathers in place while the glue sets.
Archery - 3D Printed Circular Bow – Pistol GripA unique, lightweight circular bow with a pistol grip design, fully 3D printable. Weighing only 50-100g and printable in 3-5 hours, this compact bow offers excellent maneuverability and a smooth shooting experience.
Compound Bow Square ImprovedAn advanced compound bow square to help tuning nock point height and arrow rest position with a shaft cutted part.
Recurve Arrow Tube Spacer/Stabilizer Insert V3 (4mm/0.166" diameter shafts only)PLEASE NOTE THIS WAS DESIGNED FOR THE RAMRODS ULTRA V4 STABILIZER AND MAY BE TOO NARROW FOR OTHER MODELS. If you only want to use it as an arrow separator (no stabilizer holder) then you can disregard this notice.
Arrow organizerI use a bit thicker arrows and none of the quiver organizers could fit my arrows. It is best meant for AVALOn Quivers but you can resize it in your slicer to fit your needs, The Diameter of the outer shell is 29mm and each compartment...SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.