I beefed up the limbs a little to increase strength, also added a hole for a bolt to go through the middle leg as this part kept splitting at the layer lines.
File types: STLLicence: Public domain
PrintablesFreePrintables
Archery - 3D Printed Circular Bow – Pistol Grip
- Creator (as listed at the source)
- Beda
- Licence
- Creative Commons — Attribution — Noncommercial — NoDerivativesThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Outdoor Sports
- Downloads
- 28
Overview
A unique, lightweight circular bow with a pistol grip design, fully 3D printable. Weighing only 50-100g and printable in 3-5 hours, this compact bow offers excellent maneuverability and a smooth shooting experience. The innovative round frame with a dedicated arrow gap ensures accurate aim and safe arrow flight.
Important – Elastic Tubing Required This bow is designed to be used with pure natural latex tubular elastic (also called latex tubing or surgical tubing). For standard size, use 7 mm outer diameter high-stretch pure latex tubing. Do not use regular string, rope, or low-stretch materials — they will not work properly and may damage the bow or cause unsafe shooting. The latex tubing provides the high elasticity and smooth power delivery this design needs.
Note : The model is fully scalable — you can easily resize or cut it in your slicer to perfectly match your needs and printer size. When scaling the bow, also adjust the tubing diameter proportionally for best performance.
Recommended How to Use
Read the full description
Print the bow in a strong filament (PLA+, PETG, or similar) with enough walls and infill for durability.
Cut a suitable length of pure 7 mm latex tubing and attach it securely to the bow according to the design.
Always use proper arrows and wear eye protection.
Never dry-fire the bow (shooting without an arrow).
Check the latex tubing regularly for wear or cracks and replace it when needed.
Start with light draws until you get familiar with the power and feel of the bow.
Perfect for hobbyists, archery enthusiasts, and makers who love functional 3D prints.
Help Improve the Design! If you print this bow, please send me your feedback, photos, or any suggestions. Your experience will help create a stronger and better v2 version.
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
PrintablesFree
I have only printed the 6 arrow version. There are holes in the bottom that i used to glue pennies in for additional weight, this is probably unnecesary unless you are dealing with wind or uneven...
File types: STLLicence: Attribution
PrintablesFree
3D-printable arrow component kit! Designed to fit standard 8mm wooden dowels easily available at any hardware store.
File types: 3MFLicence: Attribution
PrintablesFree
These spare parts work with the Buck Trail/Big Tradition/Thunderhorn and related bow quivers. The original version sticks to the original dimensions, an almost 1:1 replacement.
File types: STLLicence: Attribution
PrintablesFree
Due to age the straps on my Big Tradition bow quiver started falling appart, so I created a replacement. The dimensions for the holes are like in the original part.
File types: STLLicence: Attribution
PrintablesFree
I reworked the model for this bow in favor of something a bit more traditional-looking. Plus using a rest rather than a hole through the center of the riser allows for a wider range of projectiles.
File types: STLLicence: Personal use only
ThingiverseFree
Untextures, simple Longbow. Can be used as asset in games.
File types: STLLicence: Attribution
PinshapeFree
Sistema integrado de plumas helicoidales TKGO para vástagos de flecha de fibra de carbono con diámetro exterior nominal de 7,62 mm.
File types: STLLicence: Marketplace terms
Cults3DPaid
File types: 3MFLicence: Marketplace terms
Cults3DPaid
structural integrity holds up enough to print in PLA can be printed at any scale, but at double size it became really hard to pull back the firing mechanism even at the regular size these pack a punch, so be...
File types: 3MF BGCODE STLLicence: Attribution
PrintablesFree
Spacer for an arrow tube that came with a Avalon Classic Plus Backpack. This stops a lot of the rattle of the loose arrows in the tube and may even prevent damage of the vanes.
File types: F3D STLLicence: Personal use only
PrintablesFree
Fully functional miniature compound bow for shooting skewers. Consists of 18 print parts, some M3 screws and nuts and two strings (Total cost ~ 3 - 4 $). A complete list of the parts required is attached in the files.
File types: BLEND STLLicence: Personal use only
ThingiverseFree
Design Concept The broadhead wrench is crafted to provide an easy and safe way to handle broadheads without risk of injury. Its ergonomic design ensures a comfortable grip, aiding in the quick tightening or loosening of broadheads.
Licence: Personal use only
Creality CloudFree
This simple design uses old broken arrows to make them into a bow rest, giving them a new life after becomming unshootable.
File types: STLLicence: Public domain
ThingiverseFree
A tray to keep my necessary tools close at hand while fletching arrows. A spot for primer pen, glue and a small vile (.65 in) for acetone. Larger area for q-tips or vanes, or both.
File types: STLLicence: Marketplace terms
MakerWorldFree
The alignment block are inserted into each weight slots in the bow as shown in the pictures, for aligning the bow string pull the blocks through the holes to within a few mm of the bowstring and line them up with the lines on the rod as in...
File types: STLLicence: Marketplace terms
MakerWorldFree
Strong crossbow made primarily out of 3D printed parts. This is not a toy. Crossbow had measured 70 lbs of force, but this depends on the amount of tensioning and used PETG strength.
File types: STEP STLLicence: Personal use only
PrintablesFree
OpenSCAD Fletching jig If you have any suggestions, leave them in the comments or open an issue on GitHub Simple yet effective fletching jig that will adjust to all your needs.
File types: GCODE STLLicence: Personal use only
PrintablesFree
Jigs that are made for glued fletching tend to rely on the open time of the glue to get things aligned, or are otherwise complicated by needing to hold the feathers in place while the glue sets.
File types: F3D STEP STLLicence: Personal use only
PrintablesFree
Archery Pocket Quiver with Bowtech Logo for arrows up to 11mm diameter Other designs: Martin Archery:
File types: STLLicence: Personal use only
PrintablesFree
I use a bit thicker arrows and none of the quiver organizers could fit my arrows. It is best meant for AVALOn Quivers but you can resize it in your slicer to fit your needs, The Diameter of the outer shell is 29mm and each compartment...
File types: STLLicence: Personal use only
PrintablesFree
Archery Pocket Quiver with Darton Logo for arrows up to 11mm diameter Other designs: Martin Archery:
File types: STLLicence: Personal use only
PrintablesFree
Caution: this is meant for a child's bow and I consider it good for light duty only. A first design just for prototyping and easy target days. I printed the 7mm shorter version.
File types: STLLicence: Marketplace terms
PrintablesFree
The title says everything Please do not re-upload STL or any other mesh version of this project. I upload STEP only, because I want it to be easily editable. Do not poison the internet.
File types: STEPLicence: Personal use only
PrintablesFree
This is a very simple design for a fletching jig. It's designed to use minimal materials and for parts to be easily replaceable to be cheap for clubs to mass produce.
File types: SLDPRT STLLicence: Personal use only
PrintablesFree
sunshader and top plate for scope Arc systéme Ø33out
File types: SLDPRT STEPLicence: Personal use only
PrintablesFree
Quiver for outdoor archery. Simply screw it into the ground and have a nice stand for your arrows.
File types: STLLicence: Personal use only
PrintablesFree
I made this so I could store arrows in my soft case without worrying about the fletchings getting damaged. I based the design off eaton 6.5 arrows with three fletchings.
File types: STLLicence: Public domain
PrintablesFree
Compund bow for kids (8-12) Draw weight 17-33lbs Draw length 21-23 inches Limbs from PVC pipe
File types: STLLicence: Personal use only
ThingiverseFree
- link to the imgur DIY post. 12/9/15 I made a newer improved 10 part version with interlocking parts. The model is split in half and will need to be glued.
File types: STLLicence: Personal use only
ThingiverseFree
It is an upgraded version of Vincy Compound Bow Mark 1. . Main improvement: Adjustable limb angle. Shorten Bow size. And Welcome to my Facebook fan page.
File types: STLLicence: Attribution
ThingiverseFree
This model was made by a senior, Taylor Dottley, and a junior, Kristen Casey. They got the idea from the P.E. department, as archery arrows would break after use. Their teacher asked if it was possible to 3D model a replacement.
File types: STLLicence: Attribution
ThingiverseFree
Sometimes on our archery practice the nocks jump from the arrow when hitting the target. I usually can't seem to find them nowhere, so i decided to design my on nocks to print them when i lose one.
File types: STL STPLicence: Personal use only
ThingiverseFree
A new way to have fun while working... Start fighting with your colleagues! You can use the crossbow to shoot paper pieces, pen and pencils. But please... be careful! FOLLOW US! DON'T FORGET TO UPLOAD YOUR MAKES!
File types: STLLicence: Attribution
ThingiverseFree
I bought a big quantity of arrows and the seller offered me 3 mean arrow hunting tips. I don't hunt, I practice archery only by hitting paper targets.
File types: STLLicence: Personal use only
ThingiverseFree
It is an improved version of mark 2. Main improvement: 4X 30/6/600 fibre glass used. Adjustable cable tension device. Drop away arrow rest 3d printed. Power increased to 13KG.
File types: BLEND STLLicence: Attribution
ThingiverseFree
This bow is from the game Skyrim by Bethesda. Highly modified to be able to print, non functional bow. For cosplay/prop use only.
File types: STLLicence: Personal use only
ThingiverseFree
Great Eagle bow was requested not sure if it fits on an ender 3 cause of weird shaped
File types: STLLicence: Attribution
ThingiverseFree
A model of a bow, with indentions for your fingers. Can shoot shish kebob sticks or skewers up to 4 yards.
File types: STLLicence: Personal use only
ThingiverseFree
A simple Arrow rest best printed in a flexible filament such as Ninja Flex. I've been designing, iterating and printing these for a local range after they asked if a 3D printer could produce a better and cheaper alternative to the shop...
File types: STLLicence: Personal use only
ThingiverseFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.