Printables
The Recreator3D PET1 Spooler Connector
The Recreator3D PET1 Spooler Connector, uses 2x - M3x4 (or taller) screws. Reduces a rough start to your pull. - Connect one side to a draw string (we used some PET1 Filament) and connect it to the spooler.
- Creator (as listed at the source)
- JRT3D
- Licence
- Creative Commons — Attribution — Noncommercial — Share AlikeThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Accessories
- Likes
- 5
- Downloads
- 14
Overview
The Recreator3D PET1 Spooler Connector,
uses 2x - M3x4 (or taller) screws.
Reduces a rough start to your pull.
- Connect one side to a draw string (we used some PET1 Filament)
and connect it to the spooler. You'll want to use two of the pilot holes on the spooler core.
- Pull a starter piece of your bottle strip forward through the nozzle, just long to connect to it.
- Connect the second side with the screw, tight and secure.
- Start the Pultrusion command and the connector does it's job.
Check out the Demo Video here:
- Learn more about Recreator3D Pultrusion @
- BUY a KB-3D MK6 Fun Size Parts Kit Here :
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
The Recreator 3D - Community Bottle Cutter - RECYCLE - PET#1 - Plastic BottleThe Recreator 3D - Community Bottle Cutter - Cut Plastic Bottles into 8mm Strip
Recreator 3D MK5Kit Ender3 Pultrusion UnitRecreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating .
The Recreator 3D : MK6 DIY BOM - Turn PET1 plastic bottles into 3D filamentTurn PET1 plastic bottles into 3D filament. The Recreator 3D : MK6 Fun Size
Hose Connector / Adapter Set - Gardena (R) Quick-Connect Compatible, 3/4" Faucets, and 1/2" Hoses
comfortable plastic shopping bag handleDesign for comfortable hold plastic shopping bag It's works with carabiner easy to bring with you to the mall, and easy to put on the plastic bag become a comfortable handle. No addition support need, easy to print.
Prep'd BuckleThis package includes the parts to make a buckle. You can use it for a belt with nylon 1 inch webbing or a luggage strap. These parts were not designed by me.
mala color pen holderDesign for hold well with Mala color pen from Ikea. It's also fit general pen, bring easy to pick and take function. No addition support need, easy to print. The design can print without support and raft set.
1" Clip Hook Snaps to Medical Walker to hang things.Wife broke her hip and is using a walker. She wanted something to hook her water bottle to, so we printed a clip that hooks to the walker. It's designed for a 1" tube, which I suspect is fairly standard.
Small locking claspsSimple to print clasp. Designed for 550 4mm paracord projects but really can be used for just about anything. You will need to heat up the male end and bend the thumb tab up.
Hot Wheels Track ConnectorHave you lost a few hot wheels track connectors and you are trying to make a big track but you can't connect the pieces? Well here is a solution (if you have a 3D print lol.)
Chainmail connectorI made two connectors from the chainmail Using MeshLab, I am able to extract the two components, then using TinkerCAD to cut small gaps. These two connectors are slightly different. Connector 1 is slightly taller than connector 2.
Choker ClaspI recently made a choker-style necklace from some WS2811 addressable LED strand I had on hand which is 1cm wide. I designed and iterated on this clasp mechanism a couple of times before settling on this design.
Simple cloak claspThis is a very simple clasp for a cloak. The original application is for a 3 year old's super hero cape. I have created this as a functional base that can be decorated to suit your purpose.
Building Block KeychainA key-chain that allows your key-chains to be incorporated into your Lego and other building block projects!
50 mm strap adjuster and belt connector
Astronaut space suit costume valve and connector
Snap Electrical Box for ConnectorsSnap Connectors Electrical Box: 3D-Printable Enclosure for Quick Wiring. This compact electrical box is designed to house snap-in connectors for home or DIY installations, ensuring organized cables and moderate IP protection.
Chain Links, Cuban Chains, and Connector LinkThis isn't just another printable chain—it's the official chain system designed specifically for my pendant collection.
DIN Rail DB9 Connector MountNeat low profile DB9 connector shell for mounting on a DIN rail. Printed in ABS at 0.2mm layer height, 20% infill, with supports mainly for DIN rail mounting section on bottom.
90 Degree Webbing / Molle ConnectorThis reinforced 90-degree webbing adapter connects two perpendicular 25 mm (1-inch) straps without needing access to either strap end—ideal for webbing that is already sewn into a bag, backpack, organizer, or MOLLE-style...![[Use M3 screws] Spool holder for Prusa MINI Flexible, a preview image from Printables](/previews/printables/62910/card-263b3048d358bf3c.webp)
[Use M3 screws] Spool holder for Prusa MINI FlexibleNecessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI.
Hose Connector | Magnetic | Duct Adapter | 100mm 4inchUsed magnets: 5mm x 1mm (6 each) The male adapter has a protruding lip in order to make a better seal against leaking gases or vocs. It's also possible to simply connect two female adapters.
PASTA lite Receiver - a Pastamatic RemixCompatibility Use v1.0 or v1.0A1M receiver: As a stand-alone unit in conjunction with another stand-alone spool roller/stand/holder OR with Donor Spool Roller v0.3 or newer OR with Donor Spool Spinner v0.5 or...
PTFE bowden tube connectorIt merges your loose bowden tubes togehter, is fully printable and easy to connect/disconnect
Sample filament swatch with paracord loop connectorA simple filament sample swatch that is easy to browse and keep organized.
Snapmaker U1 Top Cover with Vent Opening for IKEA Samla and Walmart Sterilite v4This is an adapter for the Snapmaker U1 to use an IKEA Samla 45L box or a Walmart Sterlite 55L/58qt box as a top cover. It is meant to be a simple but very functional design. You can slide your box back for ventilation.
Spool Holder To Reverse Bowden SetupThis is the standing version of the spool holder, I have already uploaded a hanging version , some parts are the same as the other spool holder so you can reuse them if you change your setup.
3D Printed Frame SystemThis project is a modular 3D printed frame system, similar in concept to aluminum extrusion profiles, but fully printable and based on rectangular tubes.
Fitting Socket with Filament Guide for Dry BoxPlates to close the holes have been added when changing the position of the fitting socket. A PTFE tube cap has been added. ─ *Printing with flexible materials such as TPU is recommended.
Fittings Collet clips - Kit card 12pcsPneumatic fittings collet clips kit card, I keep losing them this solves the problem…
UBBI - Universal Bidirectional Bowden Interconnect - an overengineered PTFE tube quick connectWant a quick, firm, durable connection for your PTFE lines? For quick diagnostic, quick swapping , without afflicting much damage on the PTFE itself?
Remodel of Pastamatic - Filament Spool Winder for Bambu Lab and OthersFilament-Guide was revised completely: Now is M3 Screw for fine adjustment of the filament track. After tightening the cam you will be able to fine adjust the track more to the right or more to the left.
IKEA Lack ConnectorConnect 2 IKEA Lack Tables fix with Screws. I used SPAX T-Star Plus 5x25 No. 4191010500252. Need 16 of them.
Filament Spooler Remix V1 -> see V2→ neue Version: Filament Spooler Remix V2 Man kann die Sockel-Unterteile jetzt auch mit einer 0,8er Düse drucken, weil sich die Details nun am oberen Einzelteil befinden.
Sunlu Filament ConnectorOptimized kit for using the Sunlu FC01 filament connector. This D3D-Concept design allows you to lock the filament in pl
PTFE Verbinder / PTFE ConnectorDies ist ein einfacher Verbinder für 4mm PTFE Schlauch. Ich nutze den im Zusammenhang mit der MMU2s. Nun noch ein Hinweis zur Druckausrichtung: Ich drucke die Verbinder waagerecht, damit generiert man im Bereich der dann etwas unsauber...
PTFE Tube Drybox Connector
PTFE pneumatic connector clampA simple clip that locks the pneumatic fitting collet, preventing the PTFE tube from slipping out during use.
PTFE Tube Connector with PC4-M10 FittingPTFE tube connector with a PC4-M10 fitting for quick, secure tube attachment and easy clipping and unclipping during filament changes. Some cleaning is needed to remove support remains.
Filament Spooler Remix V2Überarbeitet, stabiler und passiv-Seite 10mm breiter Revised, more stable, and 10 mm wider on the passive sideSliSearch lists public model details and links to the original source. It does not host files or verify licences.