Cults3D
60.3 mm / 2.37 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°
- Creator (as listed at the source)
- evgeniy_coup
- Licence
- CULTS PU - Private UseStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Paid
- Published
- Category
- Tool
Overview
Complete 6-piece STL collection of Fishmouth Pipe Notching Templates made for Ø60.3 mm / 2.37 in round tubing. The templates are reusable 3D printable fabrication aids for marking accurate fishmouth, saddle notch and tube cope profiles before cutting and fitting round tubing. SIX different tube intersection angles are included: - 15° - 30° - 45° - 60° - 75° - 90° ALL 6 Fishmouth Pipe Notching Template STL files are included in this single listing. DESIGNED TUBE SIZE: Ø60.3 mm / approximately 2.37 in outside diameter The working principle is simple. Slide the required template over the Ø60.3 mm tube, align it for the planned joint and trace the cutting contour directly onto the metal. The template can then be removed and the tube cut close to the marked fishmouth profile. Final fitting can be completed using an angle grinder, belt grinder, file, carbide burr or another suitable metalworking tool. WORKFLOW: 1. Choose the required angle: 15°, 30°, 45°, 60°, 75° or 90°. 2. Slide the Fishmouth Pipe Notching Template onto the tube. 3. Position and align the template. 4. Mark the complete cutting contour. 5. Remove the printed template. 6. Rough-cut the tube. 7. Finish the fishmouth profile. 8. Test the tube against the mating tube. 9. Correct the fit if necessary. 10. Tack and weld after confirming alignment. Useful for: - Performance exhaust fabrication - Custom exhaust systems - Muffler and resonator fabrication - Exhaust manifolds - Turbo manifold fabrication - Exhaust collectors - Motorsport fabrication - Automotive tube work - Roll cages - Tube chassis - Space-frame construction - Off-road vehicles - Motorcycle fabrication - TIG welding - MIG welding - General metal fabrication The reusable template system is especially convenient for professional workshops and fabricators who repeatedly work with the same tube diameter. Once printed, the six templates can remain in the workshop and be reused whenever one of the included joint angles is required. This eliminates the need to calculate every tube intersection manually or prepare a new disposable paper template for each cut. 60.3 mm corresponds to approximately 2.374 inches. The metric diameter remains the reference dimension for these models. DIGITAL DOWNLOAD ONLY. The listing includes SIX STL files for 3D printing. No physical Fishmouth Pipe Notching Templates, metal tubes, exhaust components, welding equipment or cutting tools are supplied. IMPORTANT: The templates are designed for tubing with an actual outside diameter of Ø60.3 mm. Always measure your tubing before printing. Nominal pipe and tube descriptions can differ from the actual outside diameter, particularly between metric and imperial tubing standards. Tube tolerances, welded seams, paint or coatings, filament properties and printer calibration may also affect template fit. Printing one template first as a fit test is strongly recommended before producing the entire set. Always check the final fishmouth joint directly on the actual tubes before welding.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
70 mm / 2.75 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°Complete 6-piece digital STL set of Fishmouth Pipe Notching Templates designed for 2.75 in round tubing, commonly referenced as approximately 70 mm.
57 mm / 2.24 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°6-piece digital STL set of Fishmouth Pipe Notching Templates designed for Ø57 mm / 2.24 in round tubing.
63.5 mm / 2.5 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°Complete 6-piece digital STL set of Fishmouth Pipe Notching Templates designed specifically for Ø63.5 mm / 2.5 in round tubing.
76.2 mm / 3 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°Complete 6-piece digital STL set of Fishmouth Pipe Notching Templates designed for Ø76.2 mm / 3 in round tubing.
50.8 mm / 2 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°Complete 6-piece digital STL set of Fishmouth Pipe Notching Templates designed for Ø50.8 mm / 2 in round tubing.
48 mm / 1.89 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°Complete 6-piece digital STL set of Fishmouth Pipe Notching Templates designed for Ø48 mm / 1.89 in round tubing.
108 mm / 4.25 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°Complete 6-piece digital STL set of Fishmouth Pipe Notching Templates designed for Ø108 mm / approximately 4.25 in round tubing.
38.1 mm / 1.5 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°Complete 6-piece digital STL set of Fishmouth Pipe Notching Templates designed for Ø38.1 mm / 1.5 in round tubing.
88.9 mm / 3.5 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°Complete 6-piece digital STL set of Fishmouth Pipe Notching Templates designed for Ø88.9 mm / 3.5 in round tubing.
101.6 mm / 4 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°Complete 6-piece digital STL set of Fishmouth Pipe Notching Templates designed for Ø101.6 mm / 4 in round tubing.
80 mm / 3.15 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°Complete 6-piece digital STL set of Fishmouth Pipe Notching Templates designed for Ø80 mm / approximately 3.15 in round tubing.
114.3 mm / 4.5 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°Complete 6-piece digital STL set of Fishmouth Pipe Notching Templates designed for Ø114.3 mm / 4.5 in round tubing.
44.45 mm / 1.75 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°Complete digital STL set of reusable Fishmouth Pipe Notching Templates for Ø44.45 mm / 1.75 in round tubing. This package contains SIX different templates designed to mark tube-to-tube fishmouth cuts at commonly used fabrication angles.
42.4 mm / 1.67 in Fishmouth Pipe Notching Template STL Set – 6 Angles 15° 30° 45° 60° 75° 90°Complete digital STL set of reusable Fishmouth Pipe Notching Templates designed for Ø42.4 mm / 1.67 in round tubing.
63.5 mm to 80 mm / 2.5 in to 3.15 in Fishmouth Pipe Notching Template STL – 45° Tube IntersectionDigital STL Fishmouth Pipe Notching Template designed for fitting a Ø63.5 mm / 2.5 in round tube into a Ø80 mm / 3.15 in round tube at a 45° intersection angle. This listing contains ONE 3D printable template.
Metric Pipe Fishmouth Tracing Template Kit - 6 ODs x 4 AnglesN58-PTC-001 is a professional digital marking-template kit for equal-outside-diameter round-pipe joints. It includes printable sleeves and actual-size flat patterns for six common metric pipe ODs and four included joint angles.
"Half" Speed SquareThis is a speed square or "half" of one anyway! These are typically used by carpenters, fabricators, or just anyone who needs to put material together and needs it to be square. As a heavy duty diesel AG tech I use one from time to time.
Complete Tube Cutting & X-Pipe Marking Jig Set | 2.25–4 Inch | 40 FilesBuild repeatable exhaust, turbo, intake, and X-pipe sections with one printable fabrication-jig library. This complete set includes tube cutting and marking jigs for 2.25, 2.5, 3, 3.5, and 4-inch OD tubing.
63.5 mm / 2.5 in Pie Cut Pipe Cutting Template STL Set – 7 Angles for Lobster Back Exhaust BendsComplete 7-piece digital STL set of reusable Pie Cut Pipe Cutting Templates designed for Ø63.5 mm / 2.5 in round tubing.
38 mm / 1.50 in Exhaust Merge Collector Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Metric Header FabricationDigital 3D printable Exhaust Merge Collector Pipe Cutting Template designed for Ø38.0 mm / approximately 1.50 in round tubing.
76mm Turbo Inlet Protective Cover | Shop Dust & Debris CapKeep dirt, grinding dust, hardware, and shop debris out of a turbo inlet during engine assembly, fabrication, storage, or transport.
Precision Turbo T25 5-Bolt Turbine Outlet Downpipe Flange DXF – CNC Cutting FileDigital DXF file for manufacturing a 5-bolt turbine outlet flange for selected Precision Turbo turbochargers with a T25-style turbine housing.
42 mm / 1.65 in Exhaust Merge Collector Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Metric Header FabricationDigital 3D printable Exhaust Merge Collector Pipe Cutting Template designed for Ø42.0 mm / approximately 1.65 in round tubing.
Biagio 4-Bolt Turbocharger Flange Ø63.8 mm DXF – CNC Laser Waterjet Cutting FileDigital DXF cutting profile for manufacturing a 4-bolt flange for selected Biagio turbocharger applications.
38.1 mm / 1.5 in Pie Cut Pipe Cutting Template STL Set – 7 Angles for Lobster Back Exhaust BendsComplete 7-piece digital STL set of reusable Pie Cut Pipe Cutting Templates designed for Ø38.1 mm / 1.5 in round tubing.
50.8 mm / 2 in Pie Cut Pipe Cutting Template STL Set – 7 Angles for Lobster Back Exhaust BendsComplete 7-piece digital STL set of reusable Pie Cut Pipe Cutting Templates designed for Ø50.8 mm / 2 in round tubing.
44.5 mm / 1.75 in Exhaust Merge Collector Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Metric Header FabricationDigital 3D printable Exhaust Merge Collector Pipe Cutting Template designed specifically for Ø44.5 mm / approximately 1.75 in round tubing.
Square Tube Marking Jig Set — 7 SizesA complete set of reusable 3D-printable jigs for quickly marking 45° and 90° cut lines on square tubing in seven common sizes.
70 mm / 2.75 in Pie Cut Pipe Cutting Template STL Set – 7 Angles for Lobster Back Exhaust BendsComplete 7-piece digital STL set of reusable Pie Cut Pipe Cutting Templates designed for 2.75 in round tubing, commonly referenced as approximately Ø70 mm.
114.3 mm / 4.5 in Lobster Cut Pipe Template STL Set – 7 Pie Cut Angles for Segmented Exhaust BendsComplete 7-piece digital STL set of reusable Lobster Cut / Pie Cut Pipe Cutting Templates designed for Ø114.3 mm / 4.5 in round tubing.
Garrett GBC14-200 34 mm Turbocharger Flange DXF – CNC Laser Waterjet Cutting FileDigital DXF profile for manufacturing a flange for selected Garrett GBC14-200 turbocharger applications.
Garrett 42RA-47RS Turbocharger Flange DXF – CNC Laser Waterjet Cutting FileDigital DXF cutting profile for selected Garrett 42RA-47RS turbocharger applications. This drawing is intended for custom turbo fabrication, replacement flange production, adapter construction, exhaust system work and workshop repair...
45 mm / 1.77 in Exhaust Merge Collector Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Metric Header FabricationDigital 3D printable Exhaust Merge Collector Pipe Cutting Template designed specifically for Ø45.0 mm / approximately 1.77 in round tubing.
15×15 Square Tube Marking Jig — 45° & 90° Cut Line GuideSquare Tube Marking Jig 15×15 mm A simple and reusable 3D-printable jig for quickly marking 45° and 90° cut lines on 15×15 mm square tubing. Just slide the jig onto the tube and trace along the guide.
34 mm / 1.34 in Exhaust Merge Collector Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Metric Header FabricationDigital 3D printable Exhaust Merge Collector Pipe Cutting Template designed for Ø34.0 mm / 1.34 in round tubing.
80 mm / 3.15 in Lobster Cut Pipe Template STL Set – 7 Pie Cut Angles for Segmented Exhaust BendsComplete 7-piece digital STL set of reusable Lobster Cut / Pie Cut Pipe Cutting Templates designed for Ø80 mm / approximately 3.15 in round tubing.
25×25 Square Tube Marking Jig — 45° & 90° Cut Line GuideSquare Tube Marking Jig 25×25 mm A simple and reusable 3D-printable jig for quickly marking 45° and 90° cut lines on 25×25 mm square tubing. Just slide the jig onto the tube and trace along the guide.
48.3 mm / 1.90 in Exhaust Merge Collector Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Metric Header FabricationDigital 3D printable Exhaust Merge Collector Pipe Cutting Template designed specifically for Ø48.3 mm / approximately 1.90 in round tubing.
15×15 / 20×20 / 25×25 Square Tube Marking Jig Set — 45° & 90° Cut Line GuideSquare Tube Marking Jig Set A set of reusable 3D-printable jigs for quickly marking 45° and 90° cut lines on 15×15 mm, 20×20 mm, and 25×25 mm square tubing. Just slide the appropriate jig onto the tube and trace along the guide.
32 mm / 1.26 in Exhaust Merge Collector Pipe Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Header FabricationDigital 3D printable Exhaust Merge Collector Pipe Cutting Template designed specifically for Ø32.0 mm round tubing from the Europe Metric OD series.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.