Printables
IKEA UTRUSTA Drill Template for Panel
- Creator (as listed at the source)
- SirGibihm
- Licence
- Creative Commons — Public DomainStated at the source marketplace; SliSearch does not verify licences.
- File types
- 3MF F3D
- Pricing
- Free
- Published
- Category
- Kitchen
- Likes
- 2
- Downloads
- 7
Overview
For the IKEA 60x80 METOD kitchen cupboards, you might have to relocate the holes drilled into the panel. In our case, the of where the hinges are inserted into the panel. While it is easy to use different holes in the cupboard shell moving he hinges up, the panels themselves only have a single position. This template moves the hinge position two slots up/down.
Especially handy if you have a built-in extractor fan that conflicts with the default hole positioning.
Apply the template with a router and use either a 35mm Forstener bit or a router with a ball-bearing bit to drill new holes into the panel.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Router Shelf Pin Jig (Customizable)This is a jig for drilling rows of pin holes with a router, e.g. for shelves and boards. Using a router allows to drill precise and identical holes.
IKEA Kalerum 138 drill template LDrill template 128mm
Router base plate template and knobsThe attached template is generic, with hole for marking center, and a center line. You will have to transfer your mounting holes depending on your router.
Blum HK-S Drill Jig Pattern for IKEA METODThese guides allow quick and easy installation of blum HK-S hinges for ikea upper cabinets. The HK-S is a smaller, cheaper alternative to the HK sold by ikea suitable for fronts up to 80x40 (WxH).
IKEA Cabinet Hardware Hole GuideA parametric 3D-printable cabinet drilling guide designed to accurately locate two adjustable holes on a cabinet side.
Ikea Bodbyn drilling template - 160mmA drilling template for Ikea Bodbyn cupboards that allows installing a handle with hole spacing of 160mm.
Ikea Bodbyn drilling template - cornerA drilling template for Ikea Bodbyn cupboards that locates the corner.
Corner Radius Router TemplateI wanted a corner radius template for making nice rounded edges on woodworking projects. I saw a few, but didn't like them for one reason or another. I tend to make a lot of small projects and want something for the router table.
Ultimate Rounded Corner Jig for Router (Customizable)This is my ultimate router corner radius jig. The customizer allows to create jig versions for various types of curved or round corners: rounded outward, rounded inward, elliptical or chamfered corner routings.
Modular Bit Storage (Bosch/Sortimo compatible)This bit holder case is entirely customizable to the amount and type of bits you want to store in the case. The case consists of two doors with slots that are connected by two hinge pieces and two 150mm x 3mm threaded rods.
IKEA Skådis Tool Holder SetA set of 3D printed tool holders for the IKEA Skådis pegboard – designed to keep your workshop organized.
Lack Enclosure HingeSimple LACK table hinge that opens 90°, for 3mm plexiglass. I used standard M4 screw to attach the hinge, and 1mm thick washer on the hinge lever top & bottom, between the base.
IKEA Skadis drill bit holderDrill bit holder for IKEA Skadis board.
Slot Cutting Router TemplateThis is designed to replace the plastic base of a router to act as a jig to cut slots for shelving. The guide follows in the previously cut slot so you can cut many slots without moving fences or jigs.
45 degree drill guideThis is a tool for drilling 1/8" pilot holes at 45-degree angles. I designed it for vertical use, but I guess it would work on any other surface too.
IKEA LACK - drill jigYou can use it to drill the holes in your LACK table feet & into the table top (including the offset). I added the SCAD for everyone to play with the parameters, but the default worked for me.
MFT router templateWork In Progress - any suggestions, comments etc. are welcome! This is a router template for making a MFT style table top. The MFT top is inspired by - I encourage you to buy his plans to support him!
Router Radius Jig (R5,10,15,20,25,30)Router Radius Jig / Template with mountable holder R5, R10, R15, R20, R25, R30
Router templates for corner radius (metric, R5 – R100)Router corner template for rounded corners. R5 - R50 in 5mm increments and R50-R100 in 10mm increments. Feel free to request a custom radius version!
Corner Chamfer Router TemplateA very similar concept to my radius jig only this is a chamfer instead. The length written on them is a measure from the corner of the board to the edge of the template. See the diagram in the 3rd picture.
Frässchablone / Router Template / Corner Radius JigThis Router Template can be used for router lifts and also clamped to your workpiece using Microjig clamps (14°). Inspired by Snibis_Toolbox thing:4078971, I further worked on improving and extending the design.
Ikea Skadis Drill Bit CarouselLike to have my tiny drill bits organized this way. On my Skadis Peg Board. The carousel can easily picked off the holder if you need all the drill somewhere els. Have fun making, like it? LIKE it! #BREAKING!
Router jig for concealed Blum cabinet hingesA template or jig to use with your router to create holes for Blum type concealed cabinet hinges. These hinges are readily available from many sources, for instance at Ikea (Utrusta, Komplement and Integral).
Slot handle router templateSlot template for router copy bit. To create drawer handle or boxe carry handle.
Ender 3 Pro - IKEA Lack table enclosure - refined hinges, refined side panel systemLack enclosure. Below are the parts I modified and what I did: * Hinges - to enable fully-open doors, I offset the hinge and the piece it snaps onto. The doors open all the way.
Ikea binding style drill guideI needed to modify an Ikea METOD kitchen cabinet, and wanted to use the standard Ikea style fixation, witch is a strong fixation for my usage. The issue for this fixation is that they need precise drilled hole alignement.
3D printet router template for drawer handlesThis is a 3D printed router template and guide to make rounded pockets for handles in drawers. The guide fits on the Makita RT0700C router.
European Cabinet Hinge Drill TemplateThis is a standard template for the European cabinet hinges. The top side has all the marking the one may need. The distances from the edge to the bore hole center are: 22mm; 27.5mm; 37mm; 57mm.
Humbucker / Active Pickup Router TemplateThis is a router template to route out humbucker or active pickup cavities into an electric guitar body with a hand router. Relevant information is embossed into the template.
Router Fillet TemplatesThese are router templates for turning square corners into round corners. They work with with flush trim router bits* and a router table (3d print coming soon). I usually tape them in place to prevent them from shifting while cutting.
Router Template Guide BushingsThis is a set of guides that I created for my Makita RT0701C Trim Router, but I believe this pattern is used by other routers. Note, if you need bushings for the Makita router for the fixed base, see Makita / Katsu router guide bushings.
IKEA Lack Enclosure Offset Hinges (Easy remove door and refit)During my quest to build a Lack enclosure, I couldn't find any hinges that would allow a door of the enclosure to be opened fully past 90 degrees and allow easy removal and refitting if greater access required, and also not being face...
Drill Bit Holder 1-13mm Ikea Skadis1-13mm drill bit holder for an Ikea Skadis pegboard. The holder accommodates a total of 25 drill bits from 1 to 13mm (1/1.5/2/2.5/3/etc.) There are four different versions, two of which are for drill bits with a maximum shank diameter of...
Gabarit SKADIS pour défonceuse - routerVoici mon premier design, fraîchement arrivé dans la CAO depuis maintenant 1 mois ! J'aime que mon atelier et mes rangements soient optimisés.
Shapeoko DW611 Dust Collector Shoe
Radius Router Templates Imperial 1/4" to 3 15/16"This radius router template set allows you to create precise and repeatable round corners in woodworking projects.
IKEA Utrusta for Korken 4oz for 42 jars (7x6)42-jar tray for IKEA KORKEN 4 oz / 118 ml spice jars, made for the board of an IKEA UTRUSTA pull-out worktop (art. 005.105.77) in a METOD 60 cm cabinet. Six tiles butt together on butterfly keys, no glue and no screws.
qi 2 router jig kitthis is jig that fits the qi 1 from ANKER. it can be used with any thickness deck but i made mine for approx. 1.5" table top.
Ikea Lack With Folding Legs - Hinges system3D model of nikodembartnik The models were repaired and checked for printability. 3D printer lets you improve everything including Ikea products.
Makita router attachment for mort. shelf supportI made makita router RT0702CX2J mortising attachment to my work, for doing this shelf support holes easier. The center of the hole is 56mm from the edge of shelf.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.