Creality Cloud
Creality HI Hula Feet Adapter
- Creator (as listed at the source)
- StonXX
- Licence
- CXY-SLStated at the source marketplace; SliSearch does not verify licences.
- File types
- The marketplace does not list the file types.
- Pricing
- Free
- Published
- Category
- 3D Printer Parts
- Likes
- 112
- Downloads
- 196
Overview
Adapters for the ingenious Hula feet on the Creality HI. The original HI rubber feet remain in place; the printer is simply placed inside the Hula feet. Therefore, no modifications to the printer are necessary. Printed in PETG with a PLA support layer on the supports, this is also how it's set up in the 3MF for the Creality slicer. Since the printer is a little heavy, the wall thicknesses and infill are designed to be robust. For assembly, in addition to the original Hula foot materials, only an M5x20 screw and an M5 nut are needed. The adapter is in two parts for easier printing and is connected with the screw. You can optionally secure the parts with superglue. I glued foam rubber to the bottom of the feet to prevent slippage. The "mounting" on the printer... they're simply placed underneath, so no effort required! For licensing reasons, only the adapters are listed here. Please obtain further information from the official distributor or online. Adapters for the ingenious Hula feet on the Creality HI, the original HI rubber feet remain in place and the printer is simply placed inside the Hula feet. Therefore, no modifications to the printer are necessary. Printed in PETG with a PLA support layer on the supports, this is also how it's set up in the 3MF for the Creality slicer. Since the printer is quite heavy, the wall thicknesses and infill are designed to be robust. For assembly, in addition to the original HULA foot materials, only an M5x20 screw and an M5 nut are needed. The adapter is divided into two parts for easier printing and is connected with the screw. You can optionally secure the parts with superglue. I also glued foam rubber under the feet to prevent anything from slipping. The "mounting" on the printer......, they are simply placed underneath, so no effort required!
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Creality Hi - Extruder Cable Management (No-Sag) 0.2mm layerImprove the performance and aesthetics of your Creality Hi with this simple cable management solution.
Poop Stopper for Creality HiPoop catcher/stopper for Creality Hi. Sometimes it flies a little farther than I expect, so this solved the issue. Easy to print. Layer 0.2, nozzle 0.4
Creality Hi horizontal filament spool holderHorizontal Filament Spool Holder for Creality Hi. I had the problem that the original holder with the filament spool was too tall. Therefore, I designed a holder where the spool sits horizontally above the printer.
Creality Hi Combo Printer Stand with CFS Drawer
Creality Hi Bed Cable CoverIf, like me, you're tired of filament debris getting stuck between the frame and the heated bed cable of the printer, this model is for you! 3 minutes and 50 seconds of printing and only 1.06g, and the problem is solved!
Creality K2 Plus Hula Feet AdapterAdapter for the ingenious Hula Feet on the Creality K2 Plus, the original K2 feet are retained, and the printer is simply placed inside the Hula Feet. Therefore, no modifications to the printer are necessary.
Creality Hi Flush Cutters HolderThis is a holder for the cutters that come with the Creality Hi printer. I designed it since I wanted a place to put my cutters that wasn't just on the table. This can be printed with no supports needed . PLA works fine.
Creality Hi heatbed cable support V2Heated bed cable support, quick and dirty version 2, with a roll of Teflon tubing and an axle made of filament. Assembly is simple and works with various cable types.
build plate wire guideThank you for taking the time to view my design. This is the first model that I am sharing. I have created this cable guide to help prevent the Build plate wire from rubbing against the printer frame during movement.
Creality Hi Light Bar BracketREVISED MODEL Rev 10 model will not make contact with the printer while printing. DOES WORK WITH SPOOL HOLDER I was wanting a lightbar mount that was strong and did not vibrate during prints. So I came up with this.
K1 & K1C RAISER / DECKEL / TOP COVER / UPGRADE (VERSION 2) You are welcome to follow us on Instagram (sektor7_studios) OUR NEW UPGRADE FOR THIS VERSION IS ONLINE! JUST DOWNLOAD THIS MODEL NEW AND PRINT THE NEW PARTS. YOU CAN PRINT THE RAISER WITH THE HINGE OR WITHOUT THE HINGE!
Creality Hi Compact Waste BucketDesign Concept The Creality Hi Compact Waste Bucket is designed for efficiency and convenience in managing printing waste.
Creality K2 Plus Pro Combo & Hi TPU Extruder SpacerThis is a simple spacer I made for printing on my Creality Hi and K2 series printers. It helps make printing TPU a lot easier by taking the tension off the extruder.
CFS Spool Spring Pusher - RemixThis is a simple remix of the original parts. To avoid printing parts in mid-air and to ensure all overhangs have a maximum angle of 45 degrees, I completely redesigned the model based on the original dimensions.
Creality HI Screen Protector/CoverHello 3D Fans, UPDATE: I just updated the models, I'm waiting for model aproval/review, after that I will love to know your opinions. Thanks to all for helping me! This is a simple case/protector for screen HI, requested by "Mr Monkey"!
Creality Hi Nebula Camera Mount (Nozzle Visible)Are you tired of the poor camera quality of the Creality Hi? Wish you could see your prints with clear resolution and night vision? I was frustrated with the camera quality of the stock camera in the Creality Hi, as are many others.
Creality Hi Extruder Wheels for CFSDesign Concept This is a custom extruder wheel with different logos/faces r emixed from the factory file shipped with the printer. Thanks to Creality for providing these files with their printers. Printing Advice There is no STL files.
Creality HI Screen CoverDesign Concept This Creality HI Screen Cover is crafted to protect the delicate components covered by the screen, ensuring zero scratches and maintaining an elegant appearance in any setup.
Creality CFS Slider Latch #2This is an accessory for the Creality CFS latches that open the top. For anyone needing extra grip or adding customization to your build, this would be a great addition. Print with normal supports.
Creality HI Tool BoxTool Box / boite à outils avec couvercle et poubelle amovible pour Creality HI
Creality Hi Filament Dunker – Basketball Net Waste GameThis was designed for use with the Creality Hi waste bin. After having some waste go over the fence, I decided to make a fun way to try to catch any escaping filament balls. Can you make a 3 pointer? Printer Settings: 15% infill.
Creality Hi LED UpgradeDesign Concept This Creality LED upgrade is designed to enhance visibility and accuracy during the 3D printing process by illuminating the print bed. There are two versions: one with zip tie holes and one without.
Creality Hi Compact Waste bucket No CFSThe Creality Hi Compact Waste Bucket for people without a CFS is designed for efficiency and convenience in managing printing waste.
Creality Hi LED bar light bracketCreality Hi - LED light bar bracket I have other Creality printers with light bars, but the Creality Hi does not have a Creality Light bar like the Creality Ender-3 V3 Plus and Creality Ender-3 V3 KE/SE.
CFS Bypass Buddy (for TPU & CF Filaments)This TPU-printed adapter lets you mount a filament spool in the Creality CFS while bypassing the CFS feed system — perfect for printing TPU or abrasive filaments that don’t feed well through the CFS path.
Creality Hi LED Light Strip/Bar Holder Mod - No SupportQuick and easy to print, universal LED Strip/Bar Holder. I include a 330mm Bar holder for regular LED Strips and magnet mounts (2x 6x2mm Magnets) for metal LED Bars (See my video below) I am making step files available in case anybody...
Creality Hi Y Rod Greasing Tool / ApplicatorDesign Concept The Hi Y Rod Greasing Tool is crafted for precision lubrication of 3D printer rods, ensuring smooth operation and longevity of your printer.
Creality Hi heatbed cable supportAnyone who owns a Creality Hi knows that the heated bed cable rubs against the housing when the printer is running. Several users have already posted pictures showing damaged insulation on the heated bed cable.
Creality Hi Spool HolderBecause I had a crack at the weak point of my original spool holder rack, I created a new one. The original part is no longer for sale, so you can use the original spool holder tube.
Creality Hi Extruder Cover with Door Shorter VersionCreality Hi Extruder Cover with Door Shorter Version - Version with door for easy access to extruder electronics - Short version (better view of the nozzle on the camera) - Front cutout in nozzle area for better view of the nozzle from the...
Creality Hi Heatbed cable mod with cablechain R18 10x11Retrofitting the Creality Hi heated bed cable with a hinged R18 cable chain (11x10 mm inner diameter). I made two adapters into which the R18 cable chain is inserted and secured to the heated bed and housing.
Creality Hi LCD Touch Screen Cover 3d Printer ModDesign Concept The Creality Hi LCD Touch Screen Cover Mod is designed to provide protection for the Creality 3D printer's touch screen.
Creality CFS Latch Slider Accessory FlagThis was created randomly after making the CFS latch slider that had a hex shaped hole and I thought if I could somehow utilize it and add something to it.
FILAMENT GUIDE UPPER SUPPORTDesign Concept The design of this filament guide support is tailored for providing stability and direction to the filament during a 3D printing process, ensuring smooth and uninhibited movement.
Creality Hi Light BarLike this model? If so, give it a boost to help keep me providing more free content! BRACKET IS COMPATIBLE WITH SPOOL HOLDER I was wanting a lightbar mount that was strong and did not vibrate during prints. So I came up with this.
Creality Hi extruder cover with doorCreality Hi extruder cover - version with door to easy acces to extruder electronics - Full body extruder version - front cutout in nozzle area to better wiev of the nozzle from the front view - no glue (covers of fans click system) - use...
Spool Adapter for Sunlu TecBears Filament Spools for CFS/AMSDesign Concept This spool adapter is designed to fit Sunlu TecBears filament spools, specifically tailored for use with the CFS/AMS system. The adapter is engineered to ensure a smooth rotation and optimal filament feeding experience.
Falcon 9 Grid Fin Phone StandDesign Concept This Grid Fin Phone Stand draws inspiration from cellular structures, providing both a unique aesthetic and structural durability.
2020 / Ender 3 Filament GuideSnap In Guide, Many to choose from! The Base Will fit tight but should not need any trimming, tested at a few resolutions. Once its in the aluminum just click your guide in and call it a day.
Ender 3 Filament GuideHere’s my take on solving the filament path / tension issue on my Ender 3. I noticed that some of my prints had diagonal lines on the top layers as the extruder was struggling to pull filament into the feed hole at a consistent pace.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.