This is a simple, modular drawer organizer for the Ikea Galant file drawer units. This thing is the 1x2 organizer that is 1/2th the width of the drawer. Print 2 of these to fill one row across the drawer - or mix and match with the 1x1 organizer (as shown in the photo) for endless possibilities! (The 1x1 organizer is available in a different thing) The organizer is short enough to fit in the shortest Galant file drawer. Deploying them two-across will have a slight gap on each side. This organizer has slots in the bottom to allow feet to be printed and glued into place with cyanoacrylate glue. The feet should be printed with a flexible filament such as NinjaFlex 85A TPU. This will make the feet grippy to limit the sliding the organizer will do when you open or close the drawer. However, if you do not have flexible filament, it would be better to omit the feet. This gives the organizer more contact with the drawer to limit sliding.
Chosen by shared tags first, then category. Each one links to its own marketplace.
Divider system for wide IKEA ALEX drawers (or basically any drawer). Basic unit (1) equals 50 mm. Smaller 3/4 unit and 1/2 unit wide blocks give you 12.5 mm resolution for each drawer width. Slots height is 47 mm.
File types: STLLicence: Personal use only
ThingiverseFreeThis is the design that started everything. In 2019 I printed a single storage drawer to organize supplies for a used Prusa MK2.
File types: 3MF GCODELicence: Attribution
PrintablesFreeIs your print enclosure "lacking" storage? Well I have the solution for you! The Lack Enclosure Drawer unlocks the incredible enhancement of storage for your enclosure in a new and exciting way.
File types: 3MF GCODELicence: Attribution
PrintablesFreeI would also add the nTop file to have parametric modelling possible, but that's not allowed to upload here. The base plate is this one: courtesy of TheMiguelBi on Makerworld
File types: 3MFLicence: Attribution
PrintablesFreeDiscover a practical and refined way to organize everyday items on your SKÅDIS board.
File types: 3MFLicence: Personal use only
PrintablesFreeThis is a modular system to divide your drawer according to your wishes. I have created different sized containers based on the hexagonal shape which are printed in Vase Mode and can be connected to each...
File types: STLLicence: Personal use only
PrintablesFreeBin that holds stuff. It's actually pretty deep and holds up well The third screw has to be screwed with a screwdriver held in an angle but still holds up fine.
File types: 3MF F3D STEPLicence: Personal use only
PrintablesFreeA 3D-printable model of a minimalist cube storage shelf at 1:10 scale, inspired by clean, modern furniture aesthetics. It’s perfect for miniature scenes, dollhouses, desk organization, or as a reference piece for layout planning.
File types: STLLicence: Personal use only
ThingiverseFreeI made this tray for some of the tools I use regularly. Option 1: If you have a printer that is capable of printing parts that are 320 mm wide you only have to print the Complete.stl You will also need 4 Self-adhesive felt pads, about 3 mm...
File types: STLLicence: Personal use only
ThingiverseFreeThis is a simple container for IKEA's ALEX furniture to tidy your stuff. Works best for 0.4mm Nozzles. Use PLA at 240°C (first layer 200°C) and Slicer with the "Spiral vase" option enabled for quick and clean printing.
File types: IPT STLLicence: Attribution
ThingiverseFreeThese boxes are made for the IKEA ALEX drawer unit.
File types: STLLicence: Attribution
ThingiverseFreeThis is a set of drawers that uses a lot less plastic than a lot of the other drawers here, plus is still sturdy. I've left quite wide tolerances between everything to make it super easy to print on machines that aren't very accurate.
File types: STLLicence: Attribution
ThingiverseFree⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs.
File types: 3MF STLLicence: Personal use only
PrintablesFreeTwo modular storage systems combined! GEN2 Modular Storage System is a modular rail system for mounting storage units under Lack enclosures and tables.
File types: 3MF GCODE STLLicence: Attribution
PrintablesFreeIn my opinion, universal trays and bins are more practical than designated hangers for each tool. This set fits well next to the original IKEA accessories. Mounting system For Bins and Trays, use the Mounting Peg.
File types: STLLicence: Personal use only
PrintablesFreeJERRARI3D.com The Gen2 Parts Drawers are part of the GEN2 Modular Storage System I designed which features a simplified installation method that allows you to rearrange and customize layouts in minutes.
File types: 3MF GCODE STLLicence: Attribution
PrintablesFreeModular steel sheet holder for installation under Lack Table Enclosures and GEN2 Lack Drawers. For PRUSA i3 & Bambu Labs
File types: 3MF GCODE STLLicence: Attribution
PrintablesFreeFully parametric storage box you can resize to fit exactly what you need.
File types: 3MF OBJ STEPLicence: Attribution
PrintablesFreeEvery size of the GEN2 Classic Drawers in 185mm length. Classic drawers feature print-in-place handles.
File types: STLLicence: Personal use only
PrintablesFreeJERRARI3D.com The GEN2 Open Bin Lack Drawers are part of the GEN2 Modular Storage System I designed which features a simplified installation method that allows you to rearrange and customize layouts in...
File types: 3MF GCODE STLLicence: Attribution
PrintablesFreeIKEA ALEX Drawer Organizer, fits just right. In order to fit perfect you need to follow the same layout. 3x - (File 3x5AH) 1x - (File 5x9) 1x - (File 10x3FH) 2x - (File 4x6)
File types: 3MF GCODELicence: Personal use only
PrintablesFree⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs. <img class="editor-image-resize"...
File types: STLLicence: Personal use only
PrintablesFreeEvery size of the GEN2 Classic Drawers in 165mm length. Classic drawers feature print-in-place handles.
File types: STLLicence: Personal use only
PrintablesFreeA slick and easy way to create and organize filament samples that's easy to expand and customize
File types: 3MF STLLicence: Personal use only
PrintablesFreeUtilize the combined power of Gridfinity and GEN2! V2 improves rigidity and extra storage
File types: STLLicence: Personal use only
PrintablesFreeI like traditional desk drawer trays. Simple, lives at the front, holds my pens or my allen keys for my nearby printer etc.
File types: STLLicence: Personal use only
PrintablesFreeBOM: Printed with ROSA3D High Speed PLA Gray and Light Gray Keep your space tidy with these aesthetic, stackable organizer baskets.
File types: STLLicence: Personal use only
PrintablesFreeRemixed ver. of small trays by GabC to use tclips. 120mm tray tclip.stl spans across 4 pegs horizontally longer version of original model “ Tray-3W x 1L.stl ” by GabC 40mm tray tclip.stl spans across 2 pegs...
File types: STLLicence: Attribution
PrintablesFreeYou probably don't need to download this model. The original project (that this one is remixed from) now includes a double-wide drawer, along with a few other drawer types, as well as other new...
File types: STLLicence: Attribution
PrintablesFreeTired of your tools flying around the inside of your Lack Enclosure Drawers like rabid wrenches. Tame them with the Lack Drawer Inserts.
File types: 3MF GCODELicence: Attribution
PrintablesFreeTrays with hexagonal cutouts for the ikea skadis system. Original text: Different sized shelves / trays for your Ikea Skadis wall. 1 Extra Long or 2 Extra small shelves will fully span a 36cm wide panel.
File types: STLLicence: Personal use only
PrintablesFreeJERRARI3D.com The Gen2 Mini Parts Drawers are part of the GEN2 Modular Storage System I designed which features a simplified installation method that allows you to rearrange and customize layouts in minutes.
File types: 3MF STLLicence: Attribution
PrintablesFreeI made this tray for some of the tools I use regularly. Option 1: If you have a printer that is capable of printing parts that are 320 mm wide you only have to print the Complete.stl You will also need 4 Self-adhesive felt pads, about 3 mm...
File types: STLLicence: Personal use only
PrintablesFreeDesign Concept The pen and pencil case is designed to provide a sleek, minimalist storage solution with a functional sliding lid.
Licence: Marketplace terms
Creality CloudFreeCustomizable Storage Box Fully parametric storage box you can resize to fit exactly what you need. Whether it's small parts, tools, desk clutter, or kitchen items - just plug in your dimensions and print.
File types: 3MF F3D STEPLicence: Attribution
MakerWorldFreeStackable Lattice Basket — 4 sizes + parametric SCAD A family of cross-stackable lattice baskets. Every basket has four square corner posts that carry a cone peg on top and a matching cone socket on the bottom.
File types: SCAD STLLicence: Attribution
PrintablesFreeConverted the mounting system to T-Nut because my Skadis board hangs in our caravan. I don't want any chance of parts falling off during travel.
File types: 3MFLicence: Personal use only
PrintablesFreeDer ideale Aufbewahrungsbehälter für dein modulares Gridfinity-System! Dieser 1x4-Bin passt perfekt auf jede Gridfinity-Bodenplatte und sorgt für eine ordentliche und übersichtliche Organisation auf deinem Schreibtisch, in deiner Werkstatt...
File types: STLLicence: Personal use only
PrintablesFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.
