Thingiverse
Festool ETS EC150.5 EQ 90 degree sander bracket
- Creator (as listed at the source)
- Nadavau
- Licence
- Creative Commons - Attribution - Non-CommercialStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- 3D Printing
- Likes
- 145
Overview
This is a printable 90-degree mount to hold the FESTOOL ETS EC 150 sanders at a perfect right angle to the work surface. Allows you to sand bench top edges at exactly 90 degrees without rounding over the edges accidentally. Around the tool, I placed electrical tape to protect it from getting scratched, but any soft thin material can be used. Print sideways with no supports needed. HARDWARE NEEDED: 2 x 50mm countersunk head bolts with 8mm diameter head 2 x 8mm (approx) Hex nuts Printed in PETG for best performance, although from trial printing, PLA+ (or ST) worked very well too.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
PICA Marker Holder for Metabo MWB–Cap Lock System🚀 PICA Marker Holder for Metabo MWB 100 – Cap Lock System Always in reach. Ready to mark. Never lost on the workbench. My proven PICA Marker Cap-Lock Holder is now available for the Metabo MWB 100 !
Right Angle Edge Guide for Festool ETS EC125/3 EQSince Festool doesn't make a right angle edge sander for this model, and inspired by the design here: I decided to design and print my own.
Ender-3 V3 Upgrade KitUnlock your 3D printer's full potential with this set of 3 essential upgrades! No additional hardware required, just print and go! Upgrade kit includes most recent versions of: 1. Ender-3 V3 SE/KE Tool Holder/Side Storage 2.
Filament Spool RackI had a huge problem with space and arranging my rolls of filament into some kind of order, I would end up with spools of filament all on top of each other and it was Murphy's law, when I needed a specific roll, it would be right at the...
Silica gel box for CFS Creality K2
Filament Meter for Creality SpoolsDesign Concept The Filament Meter is created to enhance the simplicity and precision of tracking filament usage for Creality 3D printers.
Print bed scraper lotThe print bed scrapers are designed for easy removal of prints from the print bed without causing damage.
Ender-3 V3 SE/KE Tool Holder/Side StorageTool holder/side storage bin for the Ender-3 V3 KE, SE, and CR-10 SE 3D printers. Attaches on the left side gantry and includes a sliding top to keep out scraps.
Bed CleanerMicrofiber towel holder for easy build plate cleaning. Instructions: 1. Align the blocks with the cloth and cut it to size. 2. Wrap the cloth around the edge and crimp it down.
Duck Benchy🦆 Duck Benchy – A quacky twist on the legendary Benchy! Perfect for testing your printer with a smile.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.