Thingiverse
Part Cooling Nozzle for Anycubic Kossel
- Creator (as listed at the source)
- GER776
- Licence
- Creative Commons - AttributionThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- F3D STL
- Pricing
- Free
- Published
- Category
- 3D Printing
- Likes
- 133
Overview
UPDATE 2018-04-25: Added Fusion360 file. UPDATE 2018-01-11: Added _RevA. Came across the problem that the hotend had difficulties reaching and keeping very high temperatures as the original nozzle seems to cool the hotend as well. Probably related to the comment by friggy? Changed the nozzle to blow more downward and also increased clearance to the hotend to make for an easier fit. _ Part cooling nozzle for stock radial fan on Anycubic Kossel. I have the Linear Plus version, but assume all use the same effector, so should fit all Anycubic Kossels. It is a bit of a monstrosity compared to the other very elegant cooling nozzle designs out there, but this was done in order to increase the cross sections for air flow. This way we get the most out of the stock radial fan. The nozzle really helps a lot when printing PLA at high temperatures for best layer adhesion.
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
ANYCUBIC Kossel Delta Three PointS Filament CoolerHello friends, this is my last revision of the print cooling duct of the Anycubic Kossel Delta, this time with three exit points for better and uniform cooling during printing. Have fun ... comments and photos of your prints are welcome.
Anycubic Kossel Hotend CableholderThis part is for attaching the wiring harness that leads from the hotend to the control. The cables are led straight up to avoid a collision with the delta arms. Moreover, this also means a strain relief for the cables from the hotend.
ANYCUBIC Kossel Delta Double Points Filament CoolerHello Firiends, this is another review of the Cooling Duct for Anycubic printers, this time with double output, for efficient cooling of the filament during printing Are welcome comments and photos of your prints thanks ;-) V1.2: - Some...
Anycubic Kossel Linear Plus Delta CoversThese covers are protective covers to prevent anything from getting into the belt drive, thus blocking the system. For the cooling of the stepper motors I added ventilation openings in "Deltastyle look". This also upgrades the look.
BLTouch Adjustable Mount for Anycubic KosselI made this BLTouch adjustable mount for the Anycubic Kossel. It clips onto the effector and has a screw to hold it in place tightly.
Linear Rail alignment helper for MGN12 + V-Slot 2020 / 1515
Anycubic Kossel Part CoolerI designed this fan duct to cool the workpiece from two sides. As a result, the filament is cooled better during printing and the printed parts become cleaner.
Anycubic Kossel lcd case sidesReplace lcd spacers with this. You can screw the profile to the bottom too.
Anycubic Linear Plus Cura Profile[3/19/19 UPDATE:] For Cura 4.0, the same directions work as for Cura 3.6. Just make sure to use the C:\Program Files\Ultimaker Cura 4.x folder paths.
AnyCubic Kossel Linear Plus E3D V6 MountI did this mount after printing a few others I had found because none of them really held the V6 stable. So the biggest improvement to this mount is that it supports the V6 heatsink all the way down instead of just at the groove mount.
Carriages for Anycubic Delta Kossel Linear Plus
Anycubic Linear Plus Belt TensionersI like the Y tensioner brackets going around for the CR-10 and other printers, but I couldn't find one for the Anycubic Kossel (Linear Plus), so I designed this.
Universal LED mount for support rod M10, M8, M6, 3/8", 5/16", and 1/4" rod(update: added 4mm of material around rod braces instead of 2mm.) For those with rod or threaded rod bracing like my "Ultimate Frame bracing, Anet A8 and more": Here are simple devices you can slide on your threaded rod to hold LED strips...
Kossel 2020 Delta Tower Endcaps With Added ClearancePeaberry's end caps made slightly taller with added clearance inside for wires and 2020 extrusion
Anycubic Kossel Linear Plus E3D V6 EffectorI made the connecting rod mounting points longer so I don't have to use the copper spacers anymore. They are 52mm wide without spacers. I added a small round brim under each mounting point to help minimize warping. Trim away post print.
2020 clip on filament guide (quick vase mode)Yet another filament guide for 2020 6mm profile BUT : - Prints very fast in vase mode (pretty strong through...) - Clips on, no hardware required - In and Out with horn shape (low friction, fits various machines and mount areas)...
Anycubic Kossel and Kossel Plus Stock Firmware
Anycubic Kossel Plus Reinforcement Corner - EscuadrónLarge reinforcing corner to stiffen the structure. Three options with different numbers of screws to use.: -Escuadrón Simple (6 screws) -Escuadrón 1hole (8 screws) -Escuadrón 2hole (10 screws) The models with side screws (1hole and 2hole)...
Anycubic Kossel Extruder TPU UpgradeI designed an Upgrade for printing flexible Filament. No slipping or ejection of flexible filaments. Update 23.09.2018: added a version without logo
ANYCUBIC Kossel Delta 360 Filament CoolerCooler fan duct for an efficient cooling to 360° V2: - Fixed distance of the screw holes (now fit perfectly in the effector holes); - Eliminated useless screw holes; New V3 version: - Slightly retouched size of the toroid; - Fixed distance...
Anycubic Kossel Plus Heated Bed ClipsThese clips are for the Anycubic Kossel Plus, allowing you to support an Anycubic 220mm diameter x 3mm aluminum heated bed directly under the stock 240mm diameter glass bed.![Retro feed knob for Anycubic Kossel / Mega - Extruder Rotation Visualizer [ERV], a preview image from Thingiverse](/previews/thingiverse/2550255-0/card-76298bee5e13b6e1.webp)
Retro feed knob for Anycubic Kossel / Mega - Extruder Rotation Visualizer [ERV]Just watch as it moves when printing, or use it to feed the filament. Update (27/11/2019): Added i3 Mega Version
Clip Filament Guide for Anycubic Kossel 2020This is the Center Bearing Filament Guide with 2020 Clip for easy installation and removal.
anycubic extruder flexible filament upgradeThe are a lot of extruder Parts out there for the distance problem between the Extruder wheel an the hole. But i could not find a adapter i can just add to the extruder without screwing new parts on.
Anycubic Kossel E3D v6 hotend assemblyThis hotend assembly is composed of two halves that bolt together around the E3D heatsink groove-mount head. This is then bolted to the Anycubic stock effector plate. Mountings for 2 x 4010 fans.
Anycubic Kossel ToolholderI designed my own Toolholder for my Anycubic Kossel Plus. So you always have everything handy if you need it. It is mounted on the 2020 frame.
Anycubic Kossel Extruder Hand Wheel DeltastyleI designed a handwheel for my extruder for two reasons: - to see how fast the extruder spins - to push the filament manualy in or out by hand
Marlin 1.1.8 firmware for Anycubic Kossel(mini & plus), delta calibration circleMarlin 1.1.8 firmware for the Anycubic Kossel(mini & plus) Delta Printer. It is modified for delta auto calibration, auto fan control, Neopixel LED strip, TMC2100(TMC2130 stand-alone mode), z-probe sensor, filament change.
Anycubic Kossel Plus Rod damper clipsThe ball joints sometimes have some play and thus make noise. With these small brackets, a rubber band or as in the photos a small spring can be attached. As a result, the play and the resulting noise is significantly minimized.
The most efficient Anycubic Kossel cooling ductDon't forget to like this design before downloading. Anycubic Kossel Wiki: Anycubic Kossel Wiki Anycubic Kossel Marlin guides: Anycubic Kossel Marlin guides Anycubic Kossel Klipper guides: Anycubic Kossel Klipper...
Anycubic Kossel Linear Plus Magnet UpgradeThis parts are used to convert an Anycubic Kossel Linear Plus to magnetic delta arms. These are designed so that the original hotend can be used. The original geometry of the printer stays nearly the same (rod lengh 267mm).
Anycubic Kossel Controller BoxAnycubic Kossel Controller Box This upgrade is designed to provide better cooling to the electronics by changing the mainboard's location. Furthermore, it mounts up to two MOSFET modules.
Anycubic Kossel Control Knob DeltastyleI designed this knob for my 3d printer because I did not like the original and this did not paste to the look. The knob is simply plugged in instead of the original one.
Hexadecibel r10.11 | Anycubic Linear Plus Acrylic EnclosureWhat Are You Doing? I'm currently designing an enclosure, using 210*597mm acrylic panes. Theoretically, you could use 4 A4 panes or a every long panel except for the front two (the doors).
Anycubic Kossel Linear Plus carriage tensionerDISCLAIMER: Using the carriages with the longer connecting rod mounting points may reduce your print area from 220 to 200 mm's. Anycubic calls these belt tensioners. Now I can too. Be careful not to over tighten the belts.
Enclosure Kossel / Delta 3D printer
Kossel Base StandAdditional base stand for Anycubic Kossel Linear (and possibly for similar Kossel printers with 20mm extrusions) which raises the whole printer by 52mm, to provide clearance for a 50mm tall power supply (or additional space for the...
Anycubic Kossel radial part cooling fan mountThis is a two part mount for 50x15 radial fan to make part cooling more efficient on the Anycubic Kossel. 10/08/2017 Uploaded v.2 of the duct part. Just added option for a mounting screw (M2 - 5).
Anycubic FaceplateThis is purely an aesthetic addition to my Anycubic Kossel Plus. I saw a similar one here on thingiverse and decided to make one for my machine.
Anycubic Kossel Pulley Carriage ReinforcementCompletely elliminates any play from 20x20 pulley carriages and holds them straight. You will need a 18-22mm m3 bolt and nut for each. Mine printed: 100% infill, PLA, 60mm/sSliSearch lists public model details and links to the original source. It does not host files or verify licences.