Case for RAMPS+Mega board to fit a 80mm fan. The case has thin walls and bottom (1.5mm). Top cover is 2mm thick. It has openings for the power cables, the bed and extruder resistors, and the usb cable.
File types: STL
RAMPS 1.4 case with mount for 80mm fan
- Creator (as listed at the source)
- SupraGuy
- Licence
- Creative Commons - Attribution - Share AlikeThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- STL
- Pricing
- Free
- Published
- Category
- 3D Printing
Overview
Case with a mount for an Arduino Mega 2560 and RAMPS 1.4 shield. Openings for wires, supports for zip ties, and a mount for an 80mm cooling fan. Also accomodates an LCD/controller edit: 02/12/2015 -- My initial upload had an older version of the sides, with the holes too far apart. I've also updated the top and bottom files to include an additional support at the edges for the bottom edit: 02/14/2015 -- Slight changes based on fitting the Arduino board to the front/back files, accomodating the power socket better, and I decided to make the holes for the screws after all, as drilling out the tiny holes is annoying. Motherboard mounting screws should work perfect.
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
YouMagine
Mount a standard 80mm computer fan to a 2020 extrusion bar using M3x8 screws and metal T-Nuts (or 3d printed). The original model used a fan with rubber corners, so there is a small gap if the fan does not have this.
File types: STLLicence: Attribution
PrintablesFree
Compact enclosure for Ramps 1.4, with space for one or two 50mm fans, LCD connectors and hinged cover for easy access. After two years of having my Prusa electronics unboxed and untidy, I finally decided to design my own enclosure.
File types: STL
ThingiverseFree
This is a remix/overhaul of a previous case for the Anet A8. i have cleaned up the cases mounting and other areas. changed the cable opening and moved a bit of the mounting locations.
File types: STLLicence: Attribution
ThingiverseFree
A simple and small mount for a fan on a RAMPS1.4 board. The photos show a small 40mm fan, however the brackets are parametrizable and other fan dimensions (e.g. 50mm) could be used easily. The brackets have a small air guide on one side.
File types: SCAD STLLicence: Attribution
ThingiverseFree
Hallo Für meinen 3D Drucker wollte ich ein Gehäuse für die Elektronik. Alles sollte rein: RAMPS 1.4 Mega 2560 5x A4988 LCD 12864 Controller Schalter für LED Schalter für Lüfter Kontrollanzeige = LED Digital, Voltmeter, Amperemeter, Shunt...
File types: STLLicence: Personal use only
ThingiverseFree
I didn´t like the idea of a cooling fan hanging over my ramps board because all the wires that are connected to the board. So I created a Fan Holder that you can place next to your board or wherever you like it.
File types: STLLicence: Attribution
ThingiverseFree
File types: STLLicence: Attribution
ThingiverseFree
Based on jridley's simple and effective design This is a plate that attaches to the fan, plus an optional extension to attach it to the printer, with a few customizable options.
File types: SCAD STLLicence: Attribution
ThingiverseFree
This is a remake of "RAMP 1.4 Enclosure (Proven to fit)". I increased the height and I added a 40 mm fan.
File types: STLLicence: Attribution
ThingiverseFree
Short Version/Features: * silent and cool - no noisy mini fans! * effective airflow - 29°C/84,2°F outside, 20°C/68°F inside * Mosfet is directly mounted to the fan grill - kept cool and the blue leeds shines throught * Boardmount for MKS...
File types: STLLicence: Attribution
ThingiverseFree
This is a remix of my first Ramps case , remixed for the D-Bot a bit bigger and with tubing pathes. Part of my D-Bot Upgrades collection.
File types: SCAD STLLicence: Attribution
ThingiverseFree
The original box was nice but didn't fit the Smart Adaptor and had a few glitches.
File types: STLLicence: Attribution
ThingiverseFree
I made this Raspberry Pi 4 OctoPrint case mount for Prusa i3 MK3/s frame. The bracket is merged to the meshed bottom of the case and fits exactly on the m3 threaded holes in the prusa frame.
File types: STLLicence: Personal use only
PrintablesFree
❱ Instagram: We just added a new practical model to our library: the Fan Dust Filter. This model is designed to help protect your PC, electronics projects, workstations, enclosures, and other fan-based setups from dust while still allowing...
File types: 3MF STL STPLicence: Marketplace terms
PrintablesFree
You can support my works here: buymeacoffee.com This is a front dual 120mm fan bracket designed for the NCASE M3 Grater. The bracket allows two 120mm fans to be mounted behind the front grater panel for additional intake airflow.
File types: STEP STLLicence: Personal use only
PrintablesFree
🌀 Noctua NF-A8 Fan Cover (Push-Fit) This fan cover is specifically designed for the Noctua NF-A8 and gives your setup a clean, modern look with a stylish honeycomb pattern.
File types: 3MF STLLicence: Personal use only
PrintablesFree
You can support my works here: buymeacoffee.com This is a custom mount for installing an Aquacomputer Quadro fan controller inside the NCASE M2.
File types: STEP STLLicence: Personal use only
PrintablesFree
You can support my works here: buymeacoffee.com This is a custom offset SFX PSU mount for the NCASE M2 Grater. It was originally designed around my Cooler Master V850 SFX PSU.
File types: STEP STLLicence: Personal use only
PrintablesFree
Case for Sanguinololu board to fit a 80mm fan. The case has thin walls and bottom (1.5mm). Top is 2mm thick. It has windows for the power cables, the bed and extruder resistors, and the usb cable.
File types: STL
A mount for an 80mm case fan for my Akerbar greenhouse with Modern Aqua pegboard. Genuine IKEA Skadis pegboard is slightly thicker than the Modern Aqua acrylic, and may be too tight to fit.
File types: 3MFLicence: Marketplace terms
MakerWorldFree
this fan mount clips directly onto the RAMPS board and stays in place without wobbling.It requires two M3x20mm allen screws and two m3 nuts to mount the fan.
File types: STL
This is a functional remix of the original Tiny e-Lab, upgraded to include battery over-discharge protection, integrated voltage regulation, and enhanced HEPA fume extraction.
File types: STLLicence: Personal use only
PrintablesFree
The only thing to make note of is that there is an inset designed to catch the walls of a 1/4 in nut to keep it from spinning when tightening the screw that fastens the swivel part to the base plate.
File types: STL
A compact custom rear fan bracket that accommodate a full sized 80mmx25mm case fan; replaces the stock slim fan bracket.
File types: 3MF STLLicence: Personal use only
PrintablesFree
If you remix this or make alterations, please upload them back with all original solid works files so that everyone can use them, and people that don't have solid works can then benefit from the modifications, Thanx I Always add the...
File types: STL
Customisable conversion adaptor cowlings for fans of any size Files you will find for this thing consist of STL files of some common conversions as well as custom jobs made on request, the simple OpenSCAD file for the Customizer, an older...
File types: IPT SCAD SLDPRT STLLicence: Attribution
ThingiverseFree
Summary Breathing solder fumes can cause serious health problems, a solder fume extractor is a cheap and easy way to minimize the inhalation of such fumes, for this reason and according to my needs I designed and built this minimalist...
File types: STLLicence: Personal use only
ThingiverseFree
Redesigned box from scratch to add a hole for a 40 mm fan and remove Vesa bracket
File types: STLLicence: Attribution
ThingiverseFree
This will allow you to mount a cooling fan in place of unused PCI slot covers on your PC. In my particular application it allowed me to mount an 80mm exhaust fan under my graphics card in my Lian Li 011 Dynamic case. Works like a charm.
File types: STLLicence: Personal use only
ThingiverseFree
couldnt find a good size mount so made one using sketchup and about 8 attempts to get spacing right and strength v2 - updated and cleaned faces and fixed short pci length (sorry) v1 - intial
File types: STLLicence: Personal use only
ThingiverseFree
dual harddrive enclosure with 80mm fan mount. Best with 0.25mm layer height. The enclosure will seem flimsy until you add the harddrives. Be careful with the fan direction and follow the arrow!
File types: STLLicence: Attribution
ThingiverseFree
A visual upgrade for the Prusa MK3 and MK4 series!
File types: STLLicence: Personal use only
PrintablesFree
I designed those for two reasons. First, it's a pain to handle the bottom panel with the fan cable still attached to the motherboard. And second, when printing ABS, I was astonished to feel how hot the frame was.
File types: 3MF GCODE STEP STLLicence: Personal use only
PrintablesFree
Prusa MINI/MINI+ ‘Z-TOP’ The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+.
File types: STLLicence: Personal use only
PrintablesFree
The RPi Z-Box, designed for the 4B, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+.
File types: STLLicence: Personal use only
PrintablesFree
A DIN rail mountable fancase for your BTT Octopus / Octopus Pro to keep drivers cool ... and is just looking cool :-)
File types: STEP STLLicence: Share the source
PrintablesFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.