MakerWorld
3-Inch PVC Poultry Feeder Tray Adapter
3-Inch PVC Poultry Feeder Tray Adapter This is a functional feeder outlet/tray adapter for a 3-inch PVC/DWV poultry feeder pipe.
- Creator (as listed at the source)
- js19
- Licence
- Standard Digital File LicenseThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Pets
Overview
3-Inch PVC Poultry Feeder Tray Adapter
This is a functional feeder outlet/tray adapter for a 3-inch PVC/DWV poultry feeder pipe. I designed it after buying the wrong size pipe for my bird feeders and needing a clean way to make the setup work instead of replacing the pipe.
The adapter slips into the male end of the pipe and creates a low feed tray so dry feed can flow out into an accessible trough. I secured mine with two self-tapping screws after test fitting, and it has been working well in an active bird/poultry setup.
Print Notes
Material: PETG recommended
PLA is fine for fit testing, but PETG is better for final outdoor/coop use
Designed for dry feed only
Test fit your pipe before final installation
Secured with two self-tapping screws
Designed with a loose slip fit because feed weight, gravity, and screws help lock it in place
Fitment Note
PVC pipe sizes can vary depending on pipe type and manufacturer. This was designed around the pipe I had on hand, so measure your pipe outside diameter before printing if you need an exact fit.
Suggested Use
Chicken feeder
Duck feeder
Poultry coop feeder
Homestead/farm dry feed setup
PVC gravity feeder outlet
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
DIY 3" PVC Pipe Chicken Coop Feeder Mounting KitStop fighting rodents and dangerously jagged hardware cloth edges. This heavy-duty DIY Chicken Feeder Mounting Kit allows you to build the ultimate, secure gravity-fed PVC feeder system.
DIY 2" PVC Pipe Chicken Coop Feeder Mounting KitStop fighting rodents and dangerously jagged hardware cloth edges. This heavy-duty DIY Chicken Feeder Mounting Kit allows you to build the ultimate, secure gravity-fed PVC feeder system.
Chicken Water DispenserThis is a chicken watering system initially posted by Bastienator at This is meant as an easy to use system with the bottle and water bowl coming off together to allow for simultaneous cleaning and refilling.
Modular Bird House with Feeders | Expandable Bird CommunityThis modular birdhouse design can be used as a single bird home or expanded into a connected system of multiple houses as many as you want.
Modular Hive Guard v1.2 – Sliding Entrance & Mouse Guard SystemDescription: Modular Hive Guard v1.2 is a lightweight, easy-to-print, and highly functional entrance control system designed for beehives.
Precision Tick Remover Tool | Easy & SafeStay safe outdoors with the Precision Tick Remover Tool! Whether you're hiking, camping, or walking your dog, ticks are a common summer nuisance.
Lock Pick Short/Medium/Long HookFunctional lock picks with robustified hook design. 1mm or 0.7 mm hook thickness Short hook is more rigid and functions better than Medium hook.
Super Glider - Easy to printthe final version of my glider model, which is very easy to print. very fun with this toy!
Brick Galaxy – Bike Valve Caps (Star-Wars-inspired)Custom Bike Valve Stem Caps — “Brick Galaxy” (Star-Wars-inspired) Bring a little Force to your wheels! These Star-Wars-inspired LEGO-style valve caps snap personality onto your bike in seconds.
RCT H.U.K. Knife[H]unting [U]tility [K]nife created by Rivait Custom Tools. After remixing another maker's knife here on Thingiverse, along with the interest it received, I was inspired to create my own. I hope you enjoy my first knife design.
Slim modern strong bottle opener with coinsWe all have some coins in a drawer or a pocket. We use them less often than before. How about we transform them into something useful and cool ? Sun is out, pop that bottle baby !
Slingshot, New VersionEnglish: Slingshot, New Version is a practical 3D-printable part for a compact printable slingshot toy or hobby project.
PET Bottle Watering Spikes Slow WateringI have remixed the originals to water much slower, these watering spikes will water plants over the course of a few hours to a few days Have also found that under 1 litre works the best as 2 litres has a bit too much pressure and drains...
3D Printed Floating Pool Can Holderai visualization
Lightweight Pool Hose Holder for Intex, Marimex & Bestway Pools (Remix)Lightweight remix of the original pool hose holder with weight-reduction holes added while preserving structural strengt
Simple SlingshotEnglish: Simple Slingshot is a practical 3D-printable part for a simple printable slingshot body. Print it in a material that matches the intended load and environment, then check the fit on your own hardware before regular use.
Turtle Pool Chlorine FloaterTurtle Pool Chlorine Floater 🐢 A fun and practical floating chlorine dispenser for pools, designed in the shape of a turtle. The lower compartment is designed to hold up to 3 chlorine tablets (20g each) .
Self-Locking Tent Pole Hook & Eyelet V2 – Support-Free Camping Clip SetThis redesigned set features improved locking performance, updated geometry, stronger shapes and is now fully optimized for 100% support-free printing .
Beekeeper Frame HolderA simple 3D printed frame holder that makes hive inspections easier by safely holding frames outside the hive.
Photovoltaic Cable Clips Organizer (MC4 PV wiring for Solar Energy)Keep your photovoltaic wiring neat, secure, and professional with these simple snap-on cable clips.
SOLARIS — Lotus Wasp Trap for Coca-Cola PCO 1881 BottlesFive-entry PETG wasp trap for 1.5 L Coca-Cola PCO 1881 bottles, with close rain hoods and a hanging eye.
POOLDOCK: Snap-On Accessory Docks for Frame-Pool RailYour pool rail is prime real estate. Put it to work. POOLDOCK is a modular accessory system that snaps directly onto the horizontal top rail of a frame pool. It is designed for round Intex, Bestway, and similar frame-pool rails.
Kids Sand Mold – Police Car🚓 Kids Sand Mold – Police Car Bring the excitement of police adventures to the sandbox with this fun Police Car Sand Mold ! Perfect for the beach, sandbox, or outdoor play, this mold creates detailed police car shapes that kids will love.
Kids Sand Mold – Fire TruckBring the excitement of firefighting to the sandbox with this fun Fire Truck Sand Mold!
Rugged Containers 25mm Edition - 6 SizesRugged Containers 25mm Tall X 25 - 75mm Wide.
Floating Pool Cup Holder (Multiple Sizes)This design securely holds cups, cans, bottles, tumblers, and other drink containers while floating on the water's surface. The model is available in multiple sizes, allowing you to choose the version that best fits your favorite beverage.
Kids Sand Mold – Dump Truck🚛 Kids Sand Mold – Dump Truck Bring the excitement of construction sites to the sandbox with this fun Dump Truck Sand Mold !
Kids Sand Mold – Concrete Mixer🚚 Kids Sand Mold – Concrete Mixer Bring the excitement of construction sites to the sandbox with this fun Concrete Mixer Sand Mold !
Pool Water Level Gauge – Clip-On, 10 Sizes (5–14 cm)Stop guessing when your pool needs water Is the water too high? Is it at the correct level? Does the pool need to be topped up?
Customizable Bee nesting boxI don't have a 3D printer myself! If you print this, please post a 'Make' with a photo. I'd love to see how it turned out!" Stackable Mason Bee Hotel Create a safe and customizable nesting home for mason bees and other solitary...
CrossStake | Reinforced Tent PegThank you so much for every download, like, and support. I truly appreciate it! 🖨 Technical Information Material: PETG Model Size: 100 mm (10 cm) Nozzle size: 0.40 mm Layer height: 0.20 mm (Recommended 0.15 mm for better...
Vertical Drying Spacer Clip for 24-25mm Wood Planks - TiskosaurusI found the drying spacers by Tiskosaurus at exactly the right time, as I’m currently building a new larch fence and need to stain the slats.
Feeder fishing rod StandFeeder rod stand for fishermen. Material PETG, PCTG or ASA. Small, sturdy and practical. I recommend threading through a threaded eyelet.
CLEAN PAWSA SIMPLE ATTACHMENT THAT TURNS A STANDARD PLASTIC WATER BOTTLE INTO A PORTABLE OUTDOOR SHOWER. CleanPaws is a lightweight bottle attachment that screws onto a standard plastic bottle thread, instantly creating a gentle water shower...
GoPro Thumb Screw M5 Thread Print In PlaceGoPro screw 2.0, better grip.
Solar Buddies Easy-Clean Replacement BottleI created this replacement bottle because I found the original Solar Buddies container difficult to clean thoroughly at the end of the season or when changing sunscreen products.
Self-Watering Plant SpikeModified self-watering spike with a 0.8 mm outlet for slower, longer-lasting water delivery.
Vertical Drying Spacer Clip for 21-22mm Wood PlanksThis alignment spacer is designed for handling and organizing 21–22mm thick wooden boards. The tool features parallel slots with integrated geometric retention tabs to secure planks in a vertical orientation with a uniform air gap.
Pool Noodle Connector Set - Straight, L, T and XFour barbed connectors that let you build rafts, frames and play structures out of ordinary pool noodles.
BirdWatchAI Outdoor bird feeder with camera and AI Species detection with community feed (No subscriptions) print and build it all yourself (or buy it) includes software. NO SUBSCRIPTIONS! Your data stored locally, not in cloud (unless you want it there).See for all of the details on how to setup the software. Free download. You can print/build it all yourself, or purchase a setup kit.SliSearch lists public model details and links to the original source. It does not host files or verify licences.