Printables
RAM Mount Compatible Ball Adapter with AMPS Plate - B Size
- Creator (as listed at the source)
- MikkoP HAM3D
- Licence
- Creative Commons — Attribution — Noncommercial — Share AlikeThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- 3MF
- Pricing
- Free
- Published
- Category
- Mechanical Parts
- Likes
- 98
- Downloads
- 1,329
Overview
A simple adapter for mounting B size RAM hardware to AMPS compatible mounting points.
The RAM ball is size B (1 inch or 25.4mm)
The amps plate has the standard 30x38mm pattern
Mounting holes are sized for M4 harware (4.2mm)
The central hole can be used to reinforce the adapter with a M4 countersuck screw and a bolt, but the mount should be sturdy enough for lighter use cases even without the reinforcement if you print it with additional perimeters and higher infill.
For outdoor/automotive use it is recommended to print this from PETG/ABS or similar to avoid warping under higher temperatures. ABS, ASA or Nylon would likely be ideal for improved impact resistance and toughness
This adapter is compatible for example with the garmins charging dock for the gpsmap 66i/67 models and allows them to be adapted to use standard ram mounts.
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
1" Ball Mount System1" ball mount system, compatible with 1" RAM® mounts
Ram Mount (RamMount) short ball holder + key
Ram Mount Quick-Grip replacement pinsVery easy print. No supports.
1" RAM Ball Socket to AMPS AdapterThis adapter incorporates a standard 1" (25.4 mm) compression socket with an AMPS 30 × 38 mm mounting pattern , allowing you to mount RAM® B-size compatible accessories to any AMPS-compatible base or...
RAM Mounts Cupholder attachmentRAM Mount's ball and socket system is a fantastic mount system. This cupholder ball attachment allows sturdy placement in a vehicle's cupholder for RAM Mount accessories. Ball size is 1 inch. Printed in PLA.
Anker Prime MagSafe AMPS AdapterAdapts the Anker Prime MagSafe Car Charger's ball-joint mount to a AMPS mounting pattern.
Ram compatible Look-a-Like mounting systemI am a great fan of the Rammount system to attach stuff to your bicycle or bike. However, you never have enough components and they only come in black :-) So when I needed some more clamps, for my GoldWing, I designed my own and it works...
Dremel AdapterI have searched this adapter on Thingiverse, but I didn't find one. So I desinged my own adapter. You can modify and optimize like you want, feel free. It is not perfect, but it does the job pretty well.
Base RAM MOUNT 1"Realice esta base con bola para los soportes Ram Mount, es totalmente compatible.
RIS/Picatinny mount (metric parts)STL FILES can be found here: Why Just a simple picatinny mount that you can use to mount anything you like. Use it as a starting point for your own designs....or just print it and glue something to it.
Panel mountThe dimensions in the file names are the rectangular cutouts into which the USB cable is clamped. You need an M3 grub screw. Die Maße in den Dateinamen, sind die rechteckigen Ausschnitte, in welche das USB Kabel geklemmt wird.
Bicycle Front Light Mount (32mm and 22mm handlebars)A bicycle handlebar extension for mounting front light (or other handlebar-mounted accessory) in the middle and above all control cables. Designed to fit on 32mm or 22mm handlebars (parts are named accordingly).
Jeep JK Wrangler A-Pillar RAM MountI designed this RAM Mount using a 5/16" 90mm long allen key cap screw to mount on the A Pillar of my Jeep JK Wrangler.
Laser Mount for TelescopesI made this to attach a laser to my Celestron 130 SLT telescope. I wrapped certain sections of my laser with electrical tape to avoid damaging the casing.
Quick Mount BracketThe Quick-Mount Bracket is designed for easy and efficient mounting solutions for various applications. Its modular design allows adaptability for both wall and pole setups.
Parametrische Universal Adapterplatte - OpenSCADBoost Me Thank You :) Parametrische Universal-Adapterplatte Diese vollständig anpassbare Adapterplatte verbindet zwei unterschiedliche Befestigungs- beziehungsweise Lochbilder miteinander.
Kodak Charmera C mount adapterThis adapter allows you to attach C mount lenses to your Kodak Charmera. For this to work, you should modify your camera to remove the existing lens and leave the sensor exposed.
Icom IC-2730 Control Head MountUpgrade your mobile or base station radio setup with this versatile mounting bracket designed specifically for the Icom IC-2730 dual-band transceiver control head.
Universal 32mm Microscope Adapter: LG Monitor Stand & VESA 75/100 CompatibleGive your spare monitor hardware a second life! This heavy-duty adapter allows you to mount a standard 32mm C-mount microscope boom arm onto either a repurposed LG Monitor Stand or any standard VESA 75/100 monitor arm.
Angle Corner Connector Adapter SetAngle Corner Connector Adapter Set angle profile with end caps
JK Inverter BMS Mount AdapterJK Inverter BMS Mount Adapter to fit 3 mm screws
BMW EKIY MTC16 Navigation Screen Mount AdapterThis model is a BMW EKIY MTC16 Navigation Screen Mount Adapter designed as a functional 3D printable modeling solution.
🔩 RAM Mount 1" Ball – B-202U CompatibleRAM-B-202U Compatible 1" Ball Mount – 2.5" Round Plate A 3D-printable alternative to the RAM-B-202U round ball base, designed for use with RAM Mounts B-size 1" ball arms and compatible systems.
Nintendo Switch replacement fan adapterMy replacement fan was physically different from the original and did not have the rubber mounting inserts shown in the iFixit repair guide.
Custom 49mm Macro Lens Mount for DJI Action4Boost Me Your BOOST would really motivate me to keep creating 3D data—thank you in advance! I created a mount for attaching a 49mm close-up lens to the DJI Action 4 camera.
Angle Corner Connector AdapterAngle profile with end caps
3/4 inch Adapter Compatible With Quadlock Motorcycle Handlebar MountCombine with the 7/8 inch adapter to attach your Quadlock Motorcycle Handlebar Mount Adapter to a 3/4 inch pipe. Compatible with Quadlock Motorcycle Handlebar Mount. Instructions 1.
Ezviz CP7 HP7 universal mount adapter video intercomHere's functional, universal adapter for the Ezviz video intercom models CP7 and HP7. Package includes 3 universal adapters, it's designed to face the intercom 15°, 30° or 45° to the left or right, depending how you mount it.
Creality Ender 5 Plus Orbiter V1.5 Direct Drive MountThe Ender 5 Plus does much better without the Bowden filament feed, replaced by a direct drive extruder mounted directly above the hot end and, importantly, with the centre of mass of the extruder balanced over the x-carriage, and this...
Parkside router mount to parkside railParkside performance router PMFAP 20-Li B2 Parkside rails You will need one M4 screw to secure it.
Angle Corner Connector AdapterAngle profile with end caps
Parkside clamp adapter to parkside railsAdapter with raiser for parkside clamps to parkside rails.
Angle Corner Connector Adapter
Angle Corner Connector AdapterAngle profile with end caps
Universal Wall Mount - roundEine einfache und sehr schnelle universelle Schnellspannvorrichtung für die Wand oder einer anderen Fläche.
Modified Crosman Pistol Picatinny Rail Block 2-part 1377/1322 with screws - thx @FaceHaverThe 3D preview on this site shows the negative objects as part of the model, but don’t worry — the model is designed correctly 😄 The preview here is very approximate.
Tripod Mount Holder for HAMA Profil 23Please click ❤LIKE❤ if you appreciate my work 😊 A practical 3D-printable replacement mount designed for the HAMA Profil 23 tripod . The model is designed to work with the original HAMA components .
Makera Pen‑Plotter Toolhead AdapterThis pen‑plotter adapter is ideal for precise line‑based marking and decorative work on flat surfaces.
Mount adapter for smoke detectorRod mount for Smoke detector mounting base Print resolution 0.2 or smaller Filament doesn't matter Hole for rod is 30 mm!
65 mm CNC Spindle Centering Adapter (64.4 → 65.1 mm)This simple spacer centers a 64.4 mm spindle in a 65 mm Chinese CNC spindle mount . My mount measured 65.1 mm , so tightening the spindle directly caused it to shift, leaving it off-center relative to the hole in the...SliSearch lists public model details and links to the original source. It does not host files or verify licences.