Cali Pen - The Calibration Penguin

I love the original Cali Cat, and saw that there are dozens of remixes for other animals. As I've got a family member who collects penguins, I felt this had to be done, and roughly an hour of TinkerCad work later, here we are. The Cali Pen is probably a bit less useful as a proper calibration test due to the beveled edges, but still follows similar measurements to the Cali Cat and will similarly test your printer's ability to print overhangs and suspended bridges. The Cali Pen features the following dimensional tests: - 30mm tall from foot to top of head - 20mm x 20mm body with 4mm bevels on the corners - 12mm x 12mm square top of head - feet are 8mm wide and 9mm long, with flipper tips sticking 1mm past the main body - 4mm gap between feet, 3mm to the bottom of the body - wings are 8mm front-to-back, 16mm top-to-bottom (though this might be tricky to measure squarely) - tail is 10mm wide by 4mm long - eyes are 1mm wide x 2mm tall x 1mm deep - beak is 6mm wide x 4mm tall x 2mm deep