Thingiverse
ER40 modular stand
- Creator (as listed at the source)
- Uroboros_PL
- Licence
- Creative Commons - Attribution - Share AlikeThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Machine Tools
- Downloads
- 19
Overview
PETG Wall 0.5mm x 3 Layer 0.25mm
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Screw measuring tool, M2-M10, 4-120mmBased on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height rectangular...
Bench Mountable 4-Jaw / 3-Jaw / 2-Jaw Vise with Swappable Jaws - 100% Printable!Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication.
Build Plate Cleaner Microfiber HolderSimply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Added an alternative knob for thin cloth or sandpaper.
Solder Scroll - Ergonomic, Adjustable Solder ToolThe Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm).
Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 1 to 12mmDesign reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case.
Skadis Mount CollectionFirst part of my skadis collection. Mainly mounts for printer tools. I will upload more over time. Comment if you have optimization ideas or change requests.
Vacuum nozzles for all common hose sizesA se of vacuum hose attachments of different shapes. There are 7 different nozzle shapes, each at three different angles. They are all repeated for all common hose sizes.
Rapid Metric Screw Measuring Tool (M2-M5, up to 50mm)No changes in this update, just a big thank you to everyone that's downloaded, posted a make, remixed, or re-shared this model! This was only the fourth model I shared and was the first ‘big project’ I took on while learning Fusion 360.
Fast-Operation ViseA number of people have reported that the clips are a little too thick to insert without a lot of force or sanding. I added a version of the clip that is 0.6mm thinner. It is named ThinnerClip.stl .
Nasa chainmail (4x4, 8x8, 12x16 and 32x34)Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical...
Screw Lock CarabinerCarabiner with lock that I created for study For greater strength, increase the number of walls. Normally I use four walls but I recommend using five or more.
Cable Soldering JigThis is a helper for cable soldering. Exchanged to a faster to print design and attached CAD file. As requested I added a chamfered version of the model.
Sanding Block 93x115, 115x140Printing parameters: Resolution: 0.2 mm Perimeters: 4 Supports: no Brim: recommended Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed.
Parametric hingeCredits to “rohingosling”: Parametric Butt Hinge This is a parametric butt hinge designed in OpenSCAD, offering a wide range of parameters for customization.
Precision Tweezers v2 - 3D FoldingA printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. I published an improved model of these tweezers (Precision Tweezers V3) : Print Settings : Printed on...
Clamp /print in placeThis is a very common tool in the DIY world, its main purpose is to hold objects. Without the need to use springs, this clamp has a design designed to be printed in place and ready to come out of the printer (or almost ready, you will only...
BETTER VENTILATED FUNNEL - PARAMETRICThis is probably final evolution of my parametric funnels - with an exposed vent this funnel will be a breeze to keep clean, and although it may not suit all situations, if you need a parametric funnel with a bent spout or a funnel with a...
Printbed scraperThis 3d printer build plate scraper is very useful on PEI sheets. You can use this model as: Print bed scraper Build plate cleaner Glue applicator Epoxy spreader Paint or stucco spatula...
Corner Clamp (ClampItSquare)Remix of a design by J-Max from These are corner square clamps in 30 variations used for woodworking to hold two pieces 90 degrees square during a glue-up or pocket-hole join.
Radius gauge 1-20 mmCompact gauge for outer and inner radius 1-20 mm. Printed with Prusament PETG, no supports. Layer hight 0,15 mm (first layer 0,20 mm). You need two M5x30 screws and two M5 lock nuts for assembly.
Dremel Router TableTaking off from this design (and with thanks to its designer , I developed my version of a Router Table type attachment for a Dremel 3000.
Mechanical Tally Counter 5.0This is a non-commercial print, this means you are not allowed to sell files or prints of this model. What is this? This is my fifth attempt on creating a mechanical tally counter.
Open Ball V1 (Ball vise system)This update includes the new/ final turntable that was the main holdup from v1. Parts under the “New turntable” folder. Also included several community suggested changes, see video for details.
Filament ClipEasy to install and remove. Fits on a spool.
Z-Axis Lead Screw Cleaning & Lubrication NozzlePlease measure the connection on your lubricant can before selecting the correct version. This extended spray nozzle is designed to make Z-axis lead screw cleaning and lubrication easier and cleaner on enclosed Bambu Lab 3D...
Mantis ClampVery happy with this creation, it's a 35:1 print-in-place dual stage planetary gear system (sun 1 : ring 2).
Creality BoxIntroducing the Creality Box, a 3D printable model that lets you show your appreciation for Creality, one of the leading brands of 3D printers and accessories.
Drilling Bounding RingWhen I needed a depth limiter for the drill, I downloaded models from other authors. These are interesting models with a collet lock.
Dual Direction BoltThis bolt allows two different direction nuts at the same time. It makes an interesting fidget toy. Print instructions The bolt was made after seeing this video: And while it's a lot nicer in metal, the 3d printed variant still is nice to...
Rugged Multipart Pinecil/TS100/TS80 Case (V2)The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023.
Self Centering GaugeThis is a device to get a centered marking, regardless of the width of whatever you want to mark. It works by placing the stopper on either side of the beam, bar, etc. and twisting the device until both stoppers touch the sides.
Screw Set M3 M4 M5 M6 M7 M8 M10, ISO 4017This set includes screws, nuts and washers of all kinds With smaller screws and nuts, it is necessary to set the height as low as possible so that the screw works correctly for example at M3, M4 and...
Vacuum hose adapters for all common sizesHose adapters for all common (at least what I could find online) hose sizes. All adapters have: Each size has an option of Outer Diameter measurement or Inner Diameter.
Print in place bearingsPrint in place small bearing set: Print in place BALL bearing set: Thanks, 3Dprintsmith for his important testing work.
LED-Strip soldering tool for 8, 10, 12 and 14 mm wide LED stripsSometimes it's necessary to solder wires directly to LED stripes instead of using connector plugs. I'm using this tools especially to make connections if I use the LED stripes in wet or damp environments to prevent the contacts from...
Adjustable PCB Holder ToolA handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand. This is a fully printable design, so no other hardware is required.
SHOPVAC (50mm) CAMLOCK CONNECTORS WITH MAGNETIC CATCHStandard 50mm (2inch) vacuum cuffs tend to work loose in use on many tools and are rather bulky, so I was looking for a simple locking system that would be easily adapted to any tool, so that anyone with rudimentary cad skills could...
Drill Guide and Dust CatcherA must-have drill accessory tool that both allows you to make sure you drill a perfectly perpendicular hole while also capturing all of the dust and debris.
Soft Tape Measure Spool Remix - Parametric👇 See sizing instructions below 👇 Original Tingivese Description This is a remix on ohmg's tape measure holder . Thank you for providing the STEP file!
Corner Bracket v2 (optimized for 3D printing)Normal 3d-printed brackets can easily break if you overtighten the screws. These brackets are specially designed for FDM-3D-printing.SliSearch lists public model details and links to the original source. It does not host files or verify licences.