Thingiverse
Ender 3 Max Bed Level
- Creator (as listed at the source)
- danaseangarcia
- Licence
- Creative Commons - AttributionThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- GCODE STL
- Pricing
- Free
- Published
- Category
- 3D Printing
- Likes
- 128
Overview
The creator did not write a description for this model.
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Ender 3 (Pro) Spring Guides
Ultimate Ender 3 Bed Leveling KnobThese wheels have a locking mechanism built in so they remain where you set them indefinitely. I also prefer feeling that I should go up/down one or two clicks during the process of leveling, it helps me level much faster than I could with...
Ender 3/Pro Bed Level Locks*A note from the designer: * The version that is available on cults3d.com (for a small fee) now includes a version of the locks with an INTEGRATED BED HANDLE! Check it out at * Update 2021-01-10 - Added CR-10 V2 Mini.stl to download.
Ender Series + CR-10 Series - Winged Rotary KnobCreality Ender-3 Series Rotary Encoder Knob Ender-3 Ender-3 Pro Ender-3 Max Ender-5 Ender-5 Pro CR-30 CR-10 Series CR-10 V2 CR-10 V3 CR-7 And the creality printers that use the same display and bezel. Inner Diameter 5.95mm Enjoy!
Ender 3/5 Bed leveling G-CODE + test print + LCD STEPS UPDATE 28/11/19The download consists of two files: 1- The first represents the procedure of bed leveling of the Ender 3/5 printer, which is stored directly on the microSD card. 2- The second one is a test object, to check the correct leveling of the bed.
CR-10 Bed Adjustment Knobs **STL's for CR-10S/CR-10 S4/Ender 3**
Ender 3 Rear Spool Holder (CHEP Redesign)This is a bracket for mounting the spool at the rear of an Ender 3. I really liked Chuck's design, which this is a remix of, but I just wanted to change a few things. Here's what I changed: The bracket sits about further out.
Ender 3 V2 Bed LevelCHEP's awesome tool to help bed leveling updated to work with the Ender 3 V2. Works with Ender 3 V2 firmware 1.0.1 Code moves the nozzle to just above each bed adjustment screw and pauses.
Ender 3 Pro bed-leveling-sign UPSign for Ender 3 & Ender 3 Pro to show turn direction for bed-leveling.
Ender 3 v2 Dial Gauge Mount RemixUSE Run the bed up to temperature. Once you've set the dial gauge vertically (Z-axis), do not move X (extruder) and Y (bed) axis by hand: only use software control!
Complete Ender 3 BL Touch Guide (Updated 06/13/19) - No cutting wires or buying adaptersLuckily BL Touch is now fully supported by TH3D so this makes things incredibly easy. Misc Requirements: * Generic or branded BL Touch (Clones can be bought for as low as $4 on Aliexpress or genuine for about $48 on Amazon.
Ender 3 quicker Bed Leveling Calibration Procedure (faster heating, no print)This is a quick gcode remix of elmerohueso's bed calibration procedure for Creality Ender 3. I changed three things: - The bed and nozzle heating is much faster, since the nozzle does not have to wait for the bed anymore.
Creality Ender 3 Glass Bed adapterJust added 2 with labels for how thick they are. One is 3.5 (original size) and the other has a 4mm thickness. I think this may be the slickest way to incorporate a glass bed with your Creality Ender 3.
Ender 3: 3 Point Bed LevellingThis is a three point bed levelling mod for the Ender 3 range of printers. The additional fixings/hardware required are identified in the instruction PDF. Any questions about hardware? What material I printed it with? Read the PDF!
Ender 3 locking bed knob modificationI found several knob modifications that were something like this, then I also found some spring cups for maintaining the position of the springs better.
Bed level test 200*200mmA 3 by 3 grid square of 20 by 20 cm and 0.2mm thickness to test the levelling of your bed. Works for the Ender 3
Ender 3 V2 Dial Indicator HolderI'm sharing my own Dial Indicator extruder mount for the Creality Ender 3 V2. It should work for most common Dial Indicators. You can place the Dial Indicator at various heights and then tighten it securely in place.
Dial indicator bracket for the Creality Ender 3 print headI liked the Ender 3 Vent Ring because of its compact design. I designed a dial indicator mount that would work with the stock print head and the inclusion of the vent ring. It is a snugg fit. The shaft diameter is 9.5mm.
Ender 3 Pro Bed Leveling Dial Indicator Mount - CaliperI wanted a more accurate way of leveling the bed than the conventional paper test. This mount is designed to slip on and off when needed without any screws so it is quick, easy and extremely precise.
Bed Leveling Calibration (Ender 3)Printer Tools App The definitive dashboard for your 3D printer. Connect printers from BambuLab, Klipper, OctoPrint and Creality from anywhere !Banner Printer Tools Scooter Tools App Support Xiaomi and Ninebot Scooters with Official or...
KEYTouch ABL©Hello 3D printing community Here is my way of doing the ABL on an Ender3. You just need a NC microswitch and an Allen-Key, so no need for fancy or expensive other things.
Parametric Bed Level TestI thought I had my nozzle height dialed in, until I did a print that covered the whole bed. Then I found out my print wouldn't stay stuck. So obviously I needed something to test the whole area of the print bed.
Voxelab Aquila bed leveling test will work with any 220x220 print bed
Bed leveling knobBed leveling knob. Needs a nut.
GIRO - Bed Leveling Wheel / Thumb Nut
Ender 3 Pro Dial Indicator Adapter for Bed LevelingI don't want to be bothered by installing an Auto Bed Levelling probe. My bed holds level pretty well.
Ender 3 S1 Snap-on Gridfinity - Teardrop HolesA Gridfinity base that snaps on to the top bar of the Creality Ender 3 S1 and S1 Pro. Remixed from: This remix adds slightly larger, teardrop shaped magnet holes to the original model.
Creality Ender 3 V3 Thermometer Hygrometer HolderBoost Me Please Boost me as it supports me and gives me a better chance at giving a new and better product for you to print.
Ender 3 Cable Chain
Creality Ender 3 board fan guardI felt uncomfortable with the Ender 3 fan being open to bits of filament etc. dropping into the board enclosure, as it's open and draws air in whilst running. Plus the fan draws air in directly under the heated bed.
Filler - The Customizable Filament Holder that fills your printer!This design solves all the basic necessities: - Fits almost every object with a flat top surface and printer frame when customized. - Can easily hold the weight of 1+ kg spools. - Fits between other spools if necessary.
Ender 3 Cable Chain, no screws, no unplug cableThis cable chain is a special design for the Ender 3 or Ender 3 pro. All parts fit perfectly and there are no additional parts needed. the special thing is that you don't have to unplug the cable to assembly it.
Ender 3/2020 Extrusion Light Bar
Ender 3 - Ender 3 Pro Side Mounted Spool HolderThere is a newer version of this thing which prints faster and is easier to assemble at this link: There is a Remix\Alternative Version of this thing here: Update:07\01\20 Uploaded a variation (E3_Spool Holder_V2) with extended fixing...
Snap-on LCD Cover for Creality Ender-3/Ender-3s/Ender-3 Pro/Ender-5A simple Ender series LCD Cover. No supports/glue needed. Printing orientation is as shown in the picture.
Ender-3 Z-motor spacer / support
Satsana Ender 3 Fan Duct
Ender 3 Fan CoverA smaller, more modern looking fan guard for the Creality Ender 3. •1/24/19 Added version w/o emblem, cleaned up geometry •3/9/19 Added version with bed leveling reminder *Please respect the CC licence and if you find this design useful...
Ender 3 Double DrawerNote: The Ender 3 Pro or Ender 3 Plus have a different frame which is not compatible with this model. Please Read Update 2021: I have not been on Thingivers very much over the last few years.
Ender 3 Filament GuideHere’s my take on solving the filament path / tension issue on my Ender 3. I noticed that some of my prints had diagonal lines on the top layers as the extruder was struggling to pull filament into the feed hole at a consistent pace.SliSearch lists public model details and links to the original source. It does not host files or verify licences.