Quick to print and easy to use cable holder, to help arrange cables under tables, desks, wall cabinets, behind furniture, etc. Will probably fit 8-10 cables, despite the fairly small size. I'm considering whether to scale it down.Takes less than 20 minutes to print on my printer, and screws in with a typical wood screw. You'll be done and arranged in 30 minutes! Very easy to mount, with a single screw you just screw it in quickly and turn the cable holder to the angle you want it.Printed fine without support. I had to push the arms apart a little bit to fit my drill between to screw in the screw, but that was not a problem.This design was inspired by other designs found online, but they looked too big and massive.
Chosen by shared tags first, then category. Each one links to its own marketplace.
A sturdy and reliable clamp designed for securely mounting a bicycle shock absorber. Ideal for cyclists and DIY bike projects, this holder ensures the shock absorber stays firmly in place during rides, providing stability and safety.
Licence: Marketplace terms
Creality CloudFreeA simple and practical cable holder designed to keep your cords organized and tangle-free. Perfect for managing charging cables, USB cords, headphones, and other small wires on your desk, nightstand, or workspace.
Licence: Marketplace terms
Creality CloudFreeA simple cable holder printed in Nylon. It´s 1mm thick and flexible but still very durable.
File types: STLLicence: Attribution
PinshapeFreeHad a broken surfboard, so I turned it into a holder for an EV charging cable. But, it could mount any board.. as long as it's Futures! Someone's welcome to remix to FCS :)
File types: 3MFLicence: Attribution
ThingiverseFreeThis is a set of six tubes for storing cable ties.
File types: STLLicence: Attribution
ThingiverseFreethis holder allows to using the cable when is stored in the cable order it so prevents the cables from twisting.this holder allows to using the cable when is stored in the cable order it so prevents the cables from...
ThreedingPaidThe two end caps fix two 8mm threaded rods across the centre of the printer, and the plate is cable tied on giving a base to fix your cables.
File types: STL
Erik put this one up on the Ideas page, i do not even have a Mac but it sounded like a fun mini-project to try to draw :) It would be needed to be printed in steel at shapeways or a similar service to work, please post a picture if you try...
File types: STL
Inspired by I needed something with a smaller opening to keep my cables from falling out, so I whipped up something similar. It holds the USB cable for a Samsung Galaxy S4 perfectly.
File types: STL
My flash holder at the extension cable broke. So I designed a replacement part. Partnumber is FC-311, this cable you get from a lot of distributors.You can print it nicer.
File types: STL
Universal Cable Holder (for all desktops) to keep tidy your desk from cables.
File types: STL
In this project we’ll show you how we designed and 3d printed a mount for our Tesla charging adapter. We didn’t want to drill any hole into the wall so we designed it to clip onto our shelves and it also doubles as a cable organizer.
File types: STL
There are sockets for Lightning and USB ends on sides which prevents untangling.
File types: STL
Cable clip. source is in OpenSCAD format and youmagine do not handle that type of file very well. go over to for a version that is customazable wher you can select cable size and how many cable pairs you...
File types: SCAD STL
Small utility object, to keep the cables tidy. Print out the parts and cut a strip of PVC, or any other flexible material, and the game is done.
File types: STL
Yet another earbud holder. Not like we have enough of those here on Thingiverse, right? Well, I wanted something a bit different from the designs already available.
File types: STLLicence: Personal use only
ThingiverseFreeIf you're after a solution to keep the cables in your home or office close in to walls and corners this may be the answer.
File types: STLLicence: Personal use only
ThingiverseFreeMy desktop is always a mess, full of cables everywhere. I created this little cable holder hive. It is meant to be used with small cables, but you can always scale it. Enjoy.
File types: STLLicence: Personal use only
ThingiverseFreeUse this customizable cable holder to tie your cables to your desk and prevent them from falling down. The current version only works for desks standing next to a wall and also acts as a spacer between wall and desk.
File types: SCADLicence: Personal use only
ThingiverseFreeYou can buy a commercial version of the measuring cube, posted on this site and downloaded over 2.5 million times, dishwasher safe, food-grade material, durable injection-molded plastic:
File types: STLLicence: Personal use only
ThingiverseFreeSimple (stackable) holder for USB cables for micro, mini, apple,...
File types: STLLicence: Attribution
ThingiverseFreeA simple cable holder. Works with lightning and many other usb cables.
File types: STEP STLLicence: Attribution
ThingiverseFreeUSB Cable Holder. Two versions offered, one with screw holes and one without for mounting with double-sided tape etc. There are 7 & 10 way versions. Recommended to print in PLA at 10% infill with 0.2mm layer height.
File types: STLLicence: Personal use only
ThingiverseFreePrint with PETG Z=0,2 ON MK3, MK4 you can print 24 pcs at once. Designed that Size fits to be printed on MINI too. If you have problems with detach zip ties from the bed, you can use:
File types: STLLicence: Personal use only
PrintablesFreeThe Solder Cable Holder is a compact and practical tool designed to keep two cables perfectly aligned during soldering.
File types: STLLicence: Marketplace terms
PrintablesFreeThis is a hollow modular universal joint to make your cable mess look a bit more attractive and manageable. Install where needed; office desk, home office, studio, botcave...
File types: STLLicence: Personal use only
ThingiverseFreeMade for people who use wired Earphones while out and about to keep their cables under control and out of harms way...
File types: STLLicence: Personal use only
ThingiverseFreeThis spool holder organizes your cables neat and tidy. It protects against unwanted unraveling, is modular and can be used with the gridfinity eco system.
File types: 3MF STEP STLLicence: Personal use only
PrintablesFreeThis is a cable holder with a filament string hinge. Space for cables 50x22mm, total dimensions 75x30mm Use 3-4 mm diameter wood screws and I recomend drilling a 2mm diameter hole to screw them in...
File types: STLLicence: Personal use only
ThingiverseFreeCable Clip" - Wall and Ceiling Mount for Cables and Power Cords The "Cable Clip" offers a practical solution for organizing power cords and other cables by securely holding them to walls or ceilings, ideal for applications such as...
File types: STLLicence: Personal use only
PrintablesFreeHandy Hooks' provide a quick and easy temporary or permanent hook solution. They are quick and easy prints but need to be printed with extra shells and infill than usual to ensure they are strong and fit for purpose.
File types: STLLicence: Personal use only
ThingiverseFreeOriginally posted to r/functionalprint This is a cable holder I designed for my desk. It fits into the hole inside the top surface normally meant to pass wires through, but I have replaced the original plastic piece with this cable...
File types: STLLicence: Personal use only
ThingiverseFreeExtension cord holder, easy to print! Mounted using screws D=3mm. Customizable using the STEP file. :)
File types: BGCODE STL STPLicence: Personal use only
PrintablesFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.
