Printables
Digital Multimeter Organizer
- Creator (as listed at the source)
- CorkHead
- Licence
- GNU General Public License v3.0Stated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Tools
- Likes
- 2
- Downloads
- 14
Overview
Organizer for a multi meter, probes and user's manual. The lower box has a cut out so that multi-meters with probe connectors on the bottom do not have to be taken out of the cradle to be used. There is a false bottom for the user's manual, a large compartments for probe cables and and a smaller compartment for probe tips.
The bigger compartment has enough room for two sets of cables with probes. The lid may be used as a stand to tilt the multi meter during use.
I've found this organizer very convenient.
Dimensions (inner):
Lower Box: 140mm long x 100mm wide x 45mm deep
Lid: 145mm long x 105mm wide x 25mm deep
DMM compartment : 113mm long x 56 mm wide x 25 mm deep
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Parametric Probe HolderThis object features Open in Customizer So you have DMM, Oscope and other equipment probes or cables, but they seem to "walk away"? Why not corral them with this parametric probe holder!
Digital Multimeter StandA simple holder for a digital multimeter. It fits multimeters with a width of about 65 mm. Your multimeter should not be higher than about 150 mm. Parts 1 to 3 can be glued together.
Clamp meter rugged caseA case for my clamp meter [or anything you want] It print in place with functional hinge and minimum use of supports (only on hinge area)! Latch is to be printed separatelly in TPU. Latch mount is a 2mm diameter nail.
Probe organizer
Clamp Meter Rugged CaseA case for my clamp meter [or anything you want] It prints in place with supports needed only on the hinge area The dimensions of this [pocket] clamp meter are only 151x65x34.
Uni-T Bin for Multiboard - VariantI was looking for a mount for my Uni-T LM40 Laser distance measure tool but could not find one. So I Google'd a bit and tried my luck with Fusion360. I made a small bin to hold the tool. Added the Snap for Multiboard and printed it.
IR thermometer boxA box for my infrared thermometer [or anything you need to safely guard] Internal dimensions are 65 x 170 x 53 mm It prints in place with supports needed only on the hinge area The latch should be printed in TPU or...
Normografo Alfanumerico Digitale in 4 formatiUn pratico normografo alfanumerico digitale a 7 segmenti progettato per tracciare facilmente numeri, lettere ed elementi decimali nel classico stile dei display LCD / LED.
Doctor Coat Pen Holder STL File | 3D Print Desk Organizer (Digital Download)Add a fun and professional touch to any desk with this adorable Doctor Coat Pen Holder STL file! Designed to look like a mini doctor's lab coat complete with stethoscope, cross badge, and coat stand legs — this unique organizer is perfect...
Multimeter Pegboard HolderPegboard holder for a Multimeter, One with the Pegs already in it and one with the pegs as separate parts (good if you just want mounting holes instead) Version 2: Has the PEGS BUILT IN! and Custom in model SUPPORTS for the pegs!!
Drawer Desk Organizer, 3 Parts Organizer, Desk and Office Organization, Desk - Desktop - Personal Organizer, 3D STL File Digital Download
Miniature Milk Crate, 3D Print STL File, Stackable Mini Milk Crate, 3D Print for Office, Office Gift, Organizer, 3D Digital Instant Download
FNIRSI LCR-ST1 Tweezer LCR-Meter GridfinityA Gridfinity Bin for the Fnirst LCR-St1 smart tweezers / LCR meter Awesome to protect the tips. Love mine for smd work on diy PCB's As always on my Account. No AI, No Renderings and all that Sh**. Tested Models and Pictures .
UNI-T UT12D-EU Voltage Tester /A Gridfinity Bin for the UNI-T UT12-Eu. It is a non-contact voltage detector and quite a bit more affordable than Fluke or Wiha equivalent.
Drippy Pail With Divider InsertFrom the original designer of Drippy Bucket comes… Drippy Pail! If you already have Drippy Bucket and wish it was less round-y and more square-y, this is for you!
Angled multimeter probe holdermultimeter probe holder angled
Customizable Multipurpose Modular Storage EcosystemThis model is for storing nearly everything, from SD cards to nuts and bolts, while being fully customizable!
Digital Caliper Holder for Honeycomb Storage Wall – RemixThis is a remix of an existing holder model , redesigned and adapted to hold a digital caliper on a honeycomb-style storage wall.
Test lead hanger1.26" x 0.12" Round magnets used
DMT-99 Gridfinity Multimeter CaseDesigned in a 4×2 Gridfinity footprint to keep the case as slim and compact as possible. Since the DMT-99 is almost the same size as the 4×2 footprint, there wasn’t enough room to add finger pockets without making the case...
Smart Key Management made simple (a full guide to protect YOUR home!)Bringing security with 3D‑Printed Key Tags and a Key Box A guide how to use 3D‑printed key tags, a key box (better locked than unlocked), and a secure digital key list to improve safety and organization at...
ANENG AN8008 Multimeter - GridfinityThis model is designed to hold ANENG AN8008 multimeter for Gridfinity organizer system . It has cutouts for easier access of the multimeters when trying to grab them, slot for attachments and small sign of electricity to indicate what the...
Owon Current Clamp Gridfinity HolderA Gridfinity storage bin custom-fit for Owon current clamps. The recessed profile cradles the clamp body to prevent shifting while protecting the sensor jaws.
AstroAI Mulitmeter Pegboard Mount (Euro Pegboard)For the holder and pegs, no supports are needed at all. - 4x M3x8mm (10, or 12mm prob also alright) - 4x M3 Heated inserts - 1x Multimeter Holder Mount I printed everything in black PETG Filament.
Gridfinity 4x2 Aneng AN8008 Multimeter HolderA Gridfinity storage bin designed to fit the Aneng AN8008 compact digital multimeter. The recessed profile ensures the meter stays seated during drawer movement, protecting the screen and dial.
Fanttik A10 PRO Apex Holder – Honeycomb Storage Wall (HSW)Honeycomb wall mount for the A10 pro Measuring Tape from fanttik.
Gridfinity 5x1 WE Wurth Elektronik Testing Tweezer HolderGridfinity 5x1 holder for WE (Wurth Elektronik) Multifunctional Testing Tweezers. It fits the probe handle and cables in one slot to keep your electronics workbench organized.
Small items organizerThere is a few component organizers out there already, just thought I would share my version. Hope it helps someones workshop to be a bit more tidy :) EDIT: There is now also a drawer with 8 compartments thanks to Milnei, take a look.
Pegstr - Pegboard WizardInfinite ways to create pegboard holders and bins for tools, parts or display objects. Highlights: - One or multiple (m•n matrix) objects per holder - Round, square or rectangular with rounded corners - Generate various shapes of bins and...
STACKABLE BINS ORGANIZER MINIThis is a smaller version of the original design. Could be useful to keep small parts in order. Dimensions: 80 mm x 80 mm There are four different heights for the same layout: 8 mm 11 mm 16 mm 21 mm The same set was created with handles...
Small stuff organizer - fasteners, etc (small)Small stuff organizer Designed for fasteners with easy lock and optional drawers for your needs. Items inside box can't mix together when the box is closed.
Screw sizer5 versions for measuring and sorting screws, bolts and nuts. 1 "light" metric version 1 "light" imperial version 1 "advanced" version for measuring "under head" of the screw and measuring bolts and nuts.
STACKABLE BINS ORGANIZERIt was designed to keep my electronic parts organized. However, it could be used for different items as well. I hope you will find it useful in your household.
Spool Storage BoxesAre you tired of throwing away empty filament spools? This project allows you to re-purpose them instead of recycling. It is designed for the Inland filament spools from Micro Center.
Organizer BoxPlease read the description! When you decide to print my model, please print the normal box first and see how it goes before you print the organizer holder! This model is not compatible with Gridfinity!
Stackable Crates by PolymeriaStackable Crates by Polymeria Tame the chaos in your workspace with Stackable 3D Printable Organizer Crates!
Drawer Dividers not only for IKEA Alex Drawer UnitsI only use this for the top drawer of my ALEX Drawer Unit, where I have all the tools I regularly use. It is much more fun when you always have all the tools at hand and do not have to constantly rummage for them.
Tool box ParametricBox for tools. Inspired by Frog Box v2.0, because when I enlarged it it became a mess in the fusion, I decided to redraw it from scratch. 200.185.100 are internal dimensions.
Garage Wall Hook (V3) for Cables, Hoses & Extension CordsBoost Me if you Enjoy, feel free to boost! :) Boost A strong, compact and easy-to-print wall-mounted hook designed for organizing cables, hoses, extension cords, air hoses, workshop tools and garage accessories.
Stackable Twist-Lock ContainersSliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.