Pinshape
Tic-Tac-Toe Machine
- Creator (as listed at the source)
- sergey chernyshev
- Licence
- Creative Commons AttributionStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Not listed at the source.
- Category
- Not categorized at the source.
- Downloads
- 24
Overview
SummaryTic-Tac-Toe Machine enclosure I'll add the link to electronics and assembly guide when I post it.Print SettingsPrinter Brand: MakerBotPrinter: MakerBot Replicator 2XRafts: NoSupports: NoResolution: MediumInfill: 20%Notes: No rafts or supports, just print the box upside-down and lid with wider side down. I used 15 outlines-wide skirt that touches the modes to minimize the risk of peeling off the plate because of the size, but if your printer is well-tuned, you don't need that. Kapton tape would add glossy finish to top and bottom which looks pretty good with arcade buttons.Post-PrintingNo finishing is necessary, just use a knife to remove the skirt, if you used it.Tic-Tac-Toe Machine in actionHow I Designed ThisI used Autodesk 123D Design, see a model attached. Enclosure is quite tight, if you want it easier to assemble, just make the box taller. P.S. I printed 7 prototype pieces (see last image) before it was good. Actually, last run was also a prototype as chamfer on screw holes was to low and I had to use knife to adjust it before updating the model.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
The T-Rex SkullThis model was designed by MakerBot and the original files can be found here .
Wip: Tiny articulated botSummaryPrint this little articulated robot. No additional supports. More Here: You can see what the inside of wip Author: SettingsPrinter: Prusa I3 Hephestos BQRafts: Doesn't MatterSupports: Doesn't MatterResolution: 0.2Infill: 10%Notes...
WALL-e ( cut into parts )Model divided into parts. I modeled the new tracks. Redesigned body. Print and glue together. print settings : Rafts: Doesn't Matter, Supports: No
Echo | 3 tone whistleSummaryThe Echo whistle started as an idea to create the loudest whistle for a 3D Printer and create a more compact survival whistle.
Hand HangerSummary Mount this hand on your wall to use as a place to put your keys or hang your coat. Print Settings Rafts: NoSupports: NoResolution: 0.20mmInfill: 12% Notes: Prints great in PLA at 90mm/s feed, 150mm/s travel How I Designed This Hand...
7 X 7 mm. Cable Chain UPDATE 6/25/2019This is the same cable chain that is on Amazon This is great for the heat bed wires at the rear of bed on my prusa I3 Dual extruder.. Created with Design Spark Mechanical, a FREE and extremity easy to learn and use CAD Have a great day.
Jointed HandSummaryPrints and builds an articulated hand. Mostly it is jointed by balls allowing you the opportunity to make lots of finger movements. More info: Instructions-Add adhesion brim or raft for fingers.
BeQui, Jointed RobotSummary Bequi is an jointed robot 23cm high, has 16 joints. Among her favorite hobbies include to become a support for mobile and be the star of Stop Motion movies. - See more at: She are joined by elastic cords.
Eiffel Tower #SeeTheWorldSummary Very detailed model of Eiffel Tower.
Drill bit sharpenerSummary I've researched many existing approaches to drill bit sharpening but did not find one that I like. I like simple and utilitarian designs.
Ciclop 3D ScannerSummary Ciclop 3D Scanner is an Open Source project created by BQ. All sources are hosted in GitHub:
EEZYbotARM MK2SummaryThis is a 3D printed robotic Arm. It follows the success of my previous smaller one EEZYbotARM so I simply called it MK2 (make 2) It is a little bigger and stronger, just to obtain an acceptable payload.
Headphone StandSummary For the random pattern, I use Hans Kellner's Voronoi script. The model is optimised for FDM printing.
BALL-IN-A-BOXSummaryPrinted for fun.InstructionsPrint how ever you'd like.
Darth Vader Buddha with saberOld Darth lego-like buddha Was tired of loading other darth buddha models that wouldn't slice correctly with cura and required support to print. Flattened the base of the buddha and modified the head to fit better.
Smartphone and tablet StandSummarySimple and resistant stand for your tablet or smartphone. You can put in different positions even they hang on the wall.
High-Res Super MarioSummaryHigh Resolution Mario. There are 2-3 days that i'm looking around for a good Mario 3d model to print for my little son Riccardo.
Fallout 4 Bobblehead CollectionSummaryEver wanted to collect every last bobblehead in real life? Well now you can! Scale, print, paint, and display your very own custom bobblehead collection exported straight from the Fallout 4 game meshes.
Working OcarinaSummaryAnother Ocarina, fully working. Entirely made with surfaces in 123Design. Must be printed with support ONLY on the bed or would be impossible to remove inside.. or setup supports manually. Sound as i hoped!
XYZ 20mm Calibration CubeSummaryThis is a simple calibration test cube for your 3D printer with X, Y & Z written on the axis. To further calibrate your 3D printer print one out and you can then measure this models dimensions against the expected dimensions.
Keichain / Smartphone StandSummarykeychains for use with your smartphone. Small, practical and fun keychain with different forms of animals. In addition making a keychain, you can use it to stand the smartphone.![Planet Express Ship [Futurama], a preview image from Pinshape](/previews/pinshape/24963-0/card-ab8209c16dc96db4.webp)
Planet Express Ship [Futurama]SummaryTo see more about this you can watch this video: Edit: I've added a stand for the ship due to a high number of requests. :) I'm back with another 3D design for you, and this time we're making the Planet Express Ship!
Print-In-Place Fidget Cube
The SmurfSummaryFor more printing object please visit 86Duino facebook Print SettingsPrinter: 86Duino EnjoyRafts: YesSupports: YesPost-Printing
Perendev Magnet Motor with generatorThis motor is like the others but I had added a extra Drum this is for the self contain generator.This is what inspired me The coils for the generator came from a pancake motor from out of a ceiling fan. Woks well for the job.
"Braq" jointed dragonSummary A challenge for your printer!! "Braq" is a jointed dragon of 42 pieces. Once printed pieces only need an elastic cord 2 to 3mm thick to join them.
Robot woman "Robotica"SummaryHer name is Robotica. I do not know if my profession is to design, paint or modeling. But Robotica has a little bit of everything. Robotica is an articulated doll.
Wall-E Robot - Fully 3D PrintedSummaryThis is the video showcasing Wall-E. So watch for more information and to see it in action! That’s right! It’s finally time for Wall-E.
centrifugal compressorCentrifugal compressor double volute.
Mini SNES - Raspberry Pi 2/3 Case
Easy printing Electric Violin.Summary Thanks to Stepan83 for the Elviolin. its design has inspired me. In this version: I modified some parts to facilitate printing without supports I have given a different and modern look. And I've added a integrated chinrest support.
Jointed RobotSummaryI like to create jointed figures. You can see my creations here: I want to share this posable robot figurine with you. It features ball joints and some hinge-like joints.
Articulated Christmas ToysA Christmas print. To decorate your house for the Christmas season we offer three jointed figures. They are printed at once without any additional support. Have fun painting them!
turbocharger with electric motorPrinter PRUSA i3, turbocharger with electric motor
Swirling UrnExperimentation with swirling shapes and form. I expect I shall use these in future designs.. Included are the following files: swirling_urn.stl (This is a solid model) swirling urn_hollow.stl (This model has 2mm thick walls and a...
Elite Knight - Dark soulsSummary3D printable model of Elite Knight from the game Dark souls. Updated to Version 2 (made the sword bigger). Print with support settings activated.
Glasses / SunglassesSummarySome sunglasses I designed myself enjoy!! Print SettingsPrinter Brand: RepRapPrinter: Prusa I3Rafts: NoSupports: YesResolution: 0.2 / 0.1
Strong Arm HookSummaryStrong hook with one screw holes. Height - 54 mm Width - 30 mm Depth - 30mm Holes dia 4mm I made: Silver - ABS - layer height - 0,2mm - with support 3mm Blue - PLA - layer height - 0,2mm - without support (problems at the end of the...
Star Wars Jedi InterceptorSummary I always liked their fighter from Star Wars Episode 3, so I thought I would give a go at trying to make it solidworks. I have inculded the fighter with wings closed and wings open (both having an option with R2D2 in it, or not).
ED-209This model was started with Onur AYTEKIN's fantastic model on Grabcad: This is my first paint job on a printed model so please be kind. I took a few non-film accurate liberties with the paint job.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.