Aphrodite Mystic Sculpture #RoZ

✔ Available in STL, OBJ, and 3MF formats

✔ Perfect for resin or FDM printing

✔ Ideal for collectors, artists, and mythology enthusiasts

Print & Display:

This sculpture makes a stunning display piece for any art collector, mythology fan, or historical decor setup. Print it in resin for sharp details or scale it up for an imposing FDM print.

📩 Files include:

High-resolution STL (ready for 3D printing)

OBJ & 3MF for additional compatibility

Unleash the beauty of Aphrodite in your 3D prints! Get yours now!

Optimized Print Settings for Aphrodite Model

Here are the best FDM and Resin (SLA/DLP) 3D printing settings for your model.

🔹 FDM Printing (PLA, PETG, ABS)

For FDM printers, thin details (fingers, crown) require careful tuning.

✅ Nozzle: 0.2–0.4 mm (0.2 mm for high detail)

✅ Layer Height: 0.1–0.15 mm (lower = better quality)

✅ Infill: 10–20% (denser if needed for strength)

✅ Supports: Mandatory! (especially for hands, fingers, and crown)

✅ Print Speed: 40–60 mm/s

✅ Bed Adhesion: Brim or Raft (prevents warping)

✅ Material: PLA (easier), PETG (stronger)

Additional Tips:

If the model is tall, split it into parts using Meshmixer or PrusaSlicer.

Reduce speed to 40 mm/s for better quality.

🔹 SLA/Resin Printing (Photopolymer)

For resin printers, your model will have maximum detail, but needs careful support placement.

✅ Layer Height: 0.025–0.05 mm (best detail)

✅ Orientation: Tilt 30–45° to reduce layer lines

✅ Supports: Mandatory! (under hands, crown, chin)

✅ Exposure Time: 2–3 sec (adjust per resin type)

✅ Post-Processing: Wash with IPA (Alcohol) & UV cure (5–10 min)

Additional Tips:

Enlarge the model slightly to prevent fragile parts.

Prime & paint for a stunning final result.

Which is Best?

✔ For Home Printing: SLA/Resin for highest detail, but FDM works with good support setup.

✔ For Large-Scale Prints: FDM is cheaper but loses fine details.

✔ For Selling: SLA/Resin is ideal for clean, detailed results.