Thingiverse
Overengineered headphone clamp
- Creator (as listed at the source)
- R4GE
- Licence
- Creative Commons - Attribution - Non-CommercialStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Office
- Likes
- 4
- Downloads
- 80
Overview
[AI was used for the thumbnail] This headphone clamp is an intentionally overengineered, 3-part desk mount designed for maximum rigidity, mechanical advantage, and a completely support-free printing experience. Frustrated with flimsy, generic hangers that slip or break, I spent way too much time perfecting this thing: - Topology Optimization: Used to rough out the exact areas that needed material for maximum structural integrity. - Custom Buttress Threads: Designed to optimize axial strength in one direction, while remaining easy to print even upside down. - Easy Assembly: Features a self-tapping lead at the end of the bolt and an 8mm hex recess to help you screw it in with minimal effort. - Integrated Ball Joint: Ensures perfectly even pressure distribution, compensating for any potential plastic creep or buckling under years of constant load. - Smart Slicing (Internal Voids): Includes strategic internal voids to force your slicer to automatically add extra walls and infill in critical stress locations. - 100% Support-Free: Zero supports needed anywhere, including the female threadsn, thanks to a clever geometric design trick.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Modular Desk Clamp Ecosystem
Monster Mouth Headphone Holder - Clampable
Monster Mouth Headphone Holder - Clampable 2020Monster Mouth Headophone Holder 2020 edition. New version that incorporates feedback from the original design which is almost 5 years old : New version changes: 1. Reduced material used by >%25 (faster and easier to print) 2.
Yet ANOTHER Headphone HangerMy version of the shelf mount headphone hanger. NO SUPPORTS REQUIRED Using 3d print guide from TheGoofy's "Yet ANOTHER Machine Vise" and inspired by philbarrenger's "Monster Mouth Headphone Holder" ending up with this completely different...![Modern table headphone holder - 20 - 32 mm [Update], a preview image from Thingiverse](/previews/thingiverse/2428553-0/card-91d06231f8ffa217.webp)
Modern table headphone holder - 20 - 32 mm [Update]Headphone holder for a desk or shelf. It has hook for cable, and hole for mini-jack. M12 screw with increased tolerance for easy assemble. Clamping thickness varies from 20 mm to 32 mm.
Yet ANOTHER **Compact** Headphone HangerI loved this original design, but didn't like how wide the headphone band basket was since my QC35 band is about 30mm wide. I also didn't like how low the original model would hang my headphones below my desk.
Rooted Tree Headphone StandJust a chill little tree that holds your headphones. Thick trunk, twisty branches that cradle the headband, and a bunch of roots that spread out on a tray so you’ve got a spot for USB sticks, pens, clips, or whatever else ends up on your...
Headset Hanger V1.5This Headset Hanger fits desks from a height of 5mm to 40mm. Use the Long screw for desks thinner than 18mm. I printed it with a 0.4mm nozzle and a layer height of 0.2mm with PLA on My Ender 3 which worked well for me.
Desk Mount Headphone Holder / Mount / Clamp
Nano Vise (V2) by PRImaNANO VISE V2 is here! This is a complete renewal of my quite famous Nano Vise and in fact the vise base and slider has undergone some design & size corrections like no more sharp edges at the dove tail entry plus the vise jaw-height has...
Universal Tool Holder / Collet Clamping System
Headphone Hook - Desk Mount Double HangerHolds one pair of headphones with a long cable or two pairs without.
Simplified Headphone Holder (Short)NEW 9/21/2021 Added a new version (headphone_holder_no_cable) that removes the cable holder portion of the model since I found that I don't use it at all.
Headphone HangerMy Hanging Headphone Holder keeps your desk free of clutter. See the slicing photo for printing information. When printed on its side there are no need for supports.
Nano Vise V2*For everyone who is facing the 404 Error. You can also download the files separately under "Thing Files".* NANO VISE V2 is here!
Armadillo HeadphonesGet all fitting parts here ––––––––––––––––––––––––––––––––– Tools required: Soldering Iron Min. Bed Size: 126x100 mm Suitable Materials : All materials that can flex (PLA, ABS, etc.) Required...
Pole Dancer Headphone Stand
Ikea Rodulf desk headphones headset hanger mount holderThe Ikea Rodulf Desk has two sides where you can fix the up and down botton, so you can use the free one to fix this headphone holder using two simple wood screws.
Charger Stand for AMAZFIT GTR 2 / GTR 2eplease check it : charger stand for AMAZFIT GTR 2 and the newly released GTR 2e smartwatch consist of 2 parts screwed together with 3x countersunk screws (M3 x 6-8mm) and the cable is hidden inside a small slot which goes down to the...
Headphone Holder/ Clamp 2cm RemixRemix of mistertech's Desk Mount Headphone Holder / Mount / Clamp. This is a shorter version for desks that are 2cm or less. The screw can go all the way in thus leaving no gap. The shorter size saves on print time and filament.
Headset HangerThis Headset Hanger fits desks of different sizes with an adjustable screw.
Headphone holder - under the deskTHIS IS AN UNDERDESK HEADPHONE HOLDER If you want to stash your headphone. Print it on its side. You need 2 screws or only 1 if you wanna rotate it. Holes have 4.5 mm diameter.
Support casque audio Star WarsSupport réglable, de 18 à 38mm, pour casque audio. Vis et support vis 12mm. Support for adjustable audio headphones, 18 to 38mm.
Headphone Holder, Hook, Desk Mount, ClampThough the overall design isn't tremendously unique, the sizing and specifications are unique to my setup.
Headphone Mount - Slide away
Desk Trash BinTo empty, simply slide the bin off and leave the clamp attached.
Desk clamp with hook | Topology optimizedMore durable than it looks. No support required.
Desk Cable Holder ClampDesk Cable Holder Clamp - Clamps securely to your desk, also allowing for easy removal. I designed this to be printed in the orientation the parts are in, in the 3MF to ensure strength. No supports needed, no extra walls needed.
Power Strip Desk ClampGeneral clamps for fitting a power strip to the edge of your desk.
Glasses StandVernier & Pen Desk Organiser by SD-3D | Download free STL model | Printables.com Watch Stand by SD-3D | Download free STL model | Printables.com
Headphone holderA headphone holder with a screw for tightening it to the desk. There is a version with and without a hook. The main purpose was a place to store a seperate microphone and help with cables. Hooked version needs supports on buildplate.
Monitor Riser/ StandA Basic Monitor Riser/ Monitor Stand
Desk Clamp Headphone Stand3D Printable Clamping Headphone Stand Compatible with the Majority of Desks and Headphones
Table Clamp Drink Bottle HolderDrink holder that clamps to tables. The holder has a large diameter to accommodate a large range of cups and bottles. After printing, simply slide the cup holder into the table clamp from the side.
IKEA SKADIS invisible desk mount / table clampA minimalistic table clamp to mount Skadis flush to the table top, basically invisible from the front. Installation: You need at least 4x regular M5 screws , any M5 screw between 10 mm and 36mm in length works.
Flat-Mount Cable Clips | M4 Screw (4 Sizes)A robust variation of my cable holders, designed specifically for flat-mounting. Unlike standard clips where the screw is driven from the top down, these are designed so the screw goes directly through the base in the same plane as the...
Glasses Stand (Gyriod Lattice Structure)This is an updated version of my original minimalist Glasses Stand. I wanted a design that was complex and bold while still being a practical model that could be used every day.
ikea skadis pegboard desk clampthis clamp holds skadis pegboard made by MAQUINA : the 3mm version
Ergonomic Armrest - to rest your armEasy assembly. No purchase parts needed. Most parts are designed for a pressfit. If it should be too loose you can add some glue. The cork, plywood, felt or TPU applications need to be glued into place.Please be realistic.
Cup Holder Clamp 3 (NO SUPPORTS)This is the latest version of the desk clamp cup holder. Previous versions below. This one DOES NOT require any supports of any kind. You can clamp it to your desk, and slide/rotate the cup holder onto the clamp.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.