Use a standard 140mm PC fan to assemble a tilt adjustable desk fan. Inspired by the NV-FS1 from Noctua. Please check out their products and files available here on Printables !
File types: STLLicence: Personal use only
PrintablesFreePrintables
200mm fan mount for 10 inch rack using High-Efficiency Noctua pattern
- Creator (as listed at the source)
- and7ey
- Licence
- Creative Commons — Attribution — Noncommercial — Share AlikeThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- F3Z STL
- Pricing
- Free
- Published
- Category
- Accessories
- Downloads
- 6
Overview
This is a remix of two models enabling 200mm Noctua fan installation to a 10inch rack with additional mesh filter spacer that separated mesh from fan blades.
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
PrintablesFree
This project includes cooling brackets for mounting 92 mm Noctua NF‑A9x14 fans to the Snapmaker U1 mainboard and PSU, along with a chamber insert/divider that improves airflow and adds thermal separation inside the electronics...
File types: STLLicence: Personal use only
PrintablesFree
Ender 3 & 3 Pro - Scraper Holder Ender 3 & 3 Pro - Spool Holder Ender 3 - Rear Drawer Noctua 60mm Fan Mount
File types: IPT STLLicence: Attribution
ThingiverseFree
This will allow you to mount a cooling fan in place of unused PCI slot covers on your PC. In my particular application it allowed me to mount an 80mm exhaust fan under my graphics card in my Lian Li 011 Dynamic case. Works like a charm.
File types: STLLicence: Personal use only
ThingiverseFree
Fairly simple, a Noctua 80mm Fan adaptor to the CWWK ITX Mobo CPU Radiator . Some CWWK mobos have radiators that can't be swapped by bigger models. You can however mod it to accept a bigger fan.
File types: STLLicence: Marketplace terms
MakerWorldFree
3d Model that allows you to mount a Noctua NF-A4x20 onto the Wii U.
File types: STLLicence: Personal use only
MakerWorldFree
I made this remix since the original's diameters where to narrow for my rack mount screws. This variant will fit both M4, M5 and M6 Rack-Mount screws. Also, the mounting holes for the fan itself are a bit wider so you can use more screws.
File types: STLLicence: Attribution
ThingiverseFree
Targeted SFP/Transceiver Cooling Mount (Remix) High-performance SFP modules—specifically RJ45 10GbE transceivers—generate significant heat that can lead to thermal throttling or premature hardware failure.
File types: STLLicence: Personal use only
PrintablesFree
Version of the front door using Noctua's fan grill
File types: STEP STLLicence: Personal use only
PrintablesFree
The same as the original model just fits a larger fan.
File types: STLLicence: Personal use only
PrintablesFree
I have modelled and build a holder/stand for use with 120 mm fans, in my case with a Noctua NV-AA1-12 Airflow Amplifier This model also works perfectly without the Noctua part and you could show off a nice fan that way.
File types: STLLicence: Personal use only
PrintablesFree
needed a thing made a thing used a 200mm Case Fan Honeycomb Grill 170mm Noctua Spacing by kerthg
File types: SLDPRT STEPLicence: Public domain
PrintablesFree
File types: F3D STLLicence: Attribution
PrintablesFree
A 6-inch 3U rack side panel with an integrated mount for a standard 120 mm cooling fan . This model combines the protective function of the regular side panel with active cooling.
File types: STLLicence: Personal use only
PrintablesFree
I used these guards and cross pieces to mount this 200mm fan in my van. Printed with ABS. The controller is stuck on with tape.
File types: STLLicence: Public domain
PrintablesFree
Mount a standard 80mm computer fan to a 2020 extrusion bar using M3x8 screws and metal T-Nuts (or 3d printed). The original model used a fan with rubber corners, so there is a small gap if the fan does not have this.
File types: STLLicence: Attribution
PrintablesFree
Side mount for 140mm Fan for the Galaxy Cluster 10" rack by MRP. Contains a small cutout for the wires in the corner. In principle this should fit any rack with a depth of 20cm.
File types: 3MF STEP STLLicence: Personal use only
PrintablesFree
A fan mounting panel designed to provide active cooling for my 6-inch 3U rack configuration. The panel accommodates a 120 mm cooling fan and can be combined with the optional vent blockers to create a more focused airflow path through the...
File types: STLLicence: Personal use only
PrintablesFree
A simple mount with some needed dowels (files for 20-28mm Including 3/4 and 1 Inch pipes) for your 1 kg filament spools.
File types: F3D STEP STLLicence: Personal use only
PrintablesFree
Spool box with a lot of features. Easily printable, material saving and needs only some few bolts for assembly
File types: F3D STEP STLLicence: Personal use only
PrintablesFree
I made this Raspberry Pi 4 OctoPrint case mount for Prusa i3 MK3/s frame. The bracket is merged to the meshed bottom of the case and fits exactly on the m3 threaded holes in the prusa frame.
File types: STLLicence: Personal use only
PrintablesFree
This is a remix of the 60mm version of the cooling duct from MABA . With this cooling the temperature of my stepper drivers dropped from around 85°C to 50°C. I use a Noctua NF-A6x15 5V with USB A connector.
File types: 3MFLicence: Personal use only
PrintablesFree
IKEA Vesken Filament Shelf Connectors Hey maker! 👋 A practical set of connectors to turn multiple IKEA Vesken shelves into a stable filament storage rack.
File types: STLLicence: Personal use only
PrintablesFree
Modified Rack Mount for Power Distribution Unit (reversed the socket position to be on the back face
File types: STLLicence: Attribution
PrintablesFree
🌀 Noctua NF-A8 Fan Cover (Push-Fit) This fan cover is specifically designed for the Noctua NF-A8 and gives your setup a clean, modern look with a stylish honeycomb pattern.
File types: 3MF STLLicence: Personal use only
PrintablesFree
This fan guard was originally designed by I am using a Noctua 140mm G2 fan and I found the original guard/carrier was noisy, probably because the air flow is higher.
File types: STL STPLicence: Personal use only
PrintablesFree
Compatible with all XFX models lines Swift, Quicksilver , Mecury) as i had made it with toleance in mind Use M3x4x5mm threaded inserts, 20mm screw for slim fan (15mm slim fan) or 30mm screw for normal 25mm...
File types: STLLicence: Personal use only
PrintablesFree
Mount this to your wall with 3M strips. The extensions are intended to be used with worm gear clamps to attach the inline fan to the model.
File types: STLLicence: Personal use only
PrintablesFree
Customisable conversion adaptor cowlings for fans of any size Files you will find for this thing consist of STL files of some common conversions as well as custom jobs made on request, the simple OpenSCAD file for the Customizer, an older...
File types: IPT SCAD SLDPRT STLLicence: Attribution
ThingiverseFree
Hi this is a Head phone mount that can slip on to a shelf or on to a desk. These are design to just slip on to a shelf or desk with no effort and hold themselves in place using the materials properties to allow it to act as the spring...
File types: STLLicence: Personal use only
ThingiverseFree
Boost Me Thank You :) Parametric Electronics Panel Generator Create fully customized front panels for electronics projects directly in MakerWorld’s Parametric Model Maker.
File types: SCADLicence: Marketplace terms
MakerWorldFree
This is a printable mount for storing your AR vertically on a wall by the mag well. It is designed to angle the muzzle toward the wall but will allow rifles with up to 20" barrels to clear that surface of the wall.
File types: STLLicence: Personal use only
ThingiverseFree
Unfortunately my stock 30mm fan broke and i only have some 40mm fans lying around. So i created this mount for using a bigger fan.
ThingiverseFree
This is a filament rack designed for 1kg filament spools, or spools of anything that are 200mm(~8in) in diameter.
File types: F3Z STLLicence: Personal use only
ThingiverseFree
Hey Choom! You get one of those nice new Mono-Crystal katanas, or have a bunch of other personal arms taking up space in your pad? are you tight for Eddies? Don't sweat!
File types: STLLicence: Personal use only
ThingiverseFree
This is a remix of 'Ender 3 V2 & Pro Silent Motherboard' by TerraVestra Designed to fit Ender 3 V2, but will fit Ender 3 Pro also. This cover houses 80x25mm fan.
File types: F3D STEP STLLicence: Personal use only
ThingiverseFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.