Thingiverse
Anet A6 E3D V6 X Carriage Direct Drive and/or Bowden (Final)
- Creator (as listed at the source)
- chekcian
- Licence
- Creative Commons - AttributionStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- 3D Printing
- Likes
- 118
Overview
My Final designed X-Carriage for Anet A6 E3D V6 Mount for both Direct Drive or Bowden. Include fan bracket X limit switch screw holes The E3D V6 mount for Anet A6. Please use only bowden version of E3D V6 for clone for both direct drive or bowden setup, so the ptfe tube can be channel from extruder gear right up to e3d throat, which will give you a smooth filament guide to the hotend. For Fan duct, New fan bracket and proximity sensor bracket. Please get them here :-
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Anet A6 X carriage for genuine E3D V6 bowdenThe smaller part is to a 0.2mm tolerance or no tolerance. I've not yet printed it, but hope it works! If you have any questions please feel free to ask me!
ANET A8 | Customizable E3D v6 Carriage / Bowden MountHi Thingiverse-Community! I was not satisfied with the stock hotend / extruder setup of the ANET A8! I had a couple of issues with the old one and I didn't like the following things: * Accessibility of the extruder motor was bad (unmount...
Anet A8 Prusa I3 E3d V6 Upgrade Direct Drive Mount with Print and Hot End Fan Ducts
UPDATED! Anet A8 - e3d v6 XtraSolid Support with 60mm fan v2.0After trying every single e3d v6 clamp on thingiverse for my Anet A8, I decided to design my own with custom structure.
Improved Customizeable Anet A8 E3D v6 E3Dv6 Carriage with 40mm Fan Mount
direct drive anet a6 e3d hotend
ANET A8 | Alunar M508 | E3D v6 Carriage / Bowden Mount with 12mm Sensor MountAdded a mount for 12mm proximity sensor - 63mm hot end - optimized fan nozzle included - thanks to all who contributed to original design:)
Triple Threat - E3D Carriage Bowden Mount for AM8/A8
Rogue Orbiter - V6 Orbiter 2 Tool Head - Ender 3 V2 NeoRogue Orbiter Tool Head design for the Ender 3 V2 Neo based on the E3D V6 mount (Revo Six, Dragon SF, HF, Dragonfly BMO) and the Orbiter v2.0 extruder. Battle tested and heavily iterated.
Direct Drive 3mm-GRRF-Hotend Bowden Extruder for Huxley (with removable fan ;-)Moved over from Takerbot's Thingiverse...#Unfortunately, all the images were cropped by YouMagine :(One can never have enough 3D-printers, so I decided to build some Huxleys.
Quick Change Direct Drive Bowden ExtruderThis is a quick change direct drive bowden extruder I designed for 1.75mm filament. This will allow you to quick change out your filament.The cam.stl will need to be printed with support.
Ultimaker 2 Bowden mount for direct driveI designed this bowden mount to be able to fix the bowden tube in a suitable position when using my direct drive. Fits the original 6.35 mm bowden tube.
Bowden X-Carriage Mount for E3D V6
Anet A8 E3D V6 Bowden MODULAR X Carriage V4 *BEST ONE*This is a new Selfmade E3D V6 X Carriage for the Original bearing blocks. A Hesin Remix you finde here -> # Since many have asked, and some have not noticed that the holder is MODULAR, here new pictures.
Anet A8 e3d v6 Bowden Print Carriage ReduxThis is a combine work project between myself and Dan Rogers. The purpose was to create a print head mount that allows the user some customization to their exact/ or wanted setup This is for a Bowden setup.
Anet A6 - Frankenstein (E3D v6 / Volcano)It's a live! My monster, called like Frankenstein ((= All what you need is only E3Dv6 standard extruder with his fan. Second fan and bearings you already have in original Anet A6 extruder. Required bowden filament feeder.
E3D V6 Bowden carriage DL V1.2E3D V6 Bowden carriage. Designed for maximum accessibility from the front, by placing the fan on the back. NEW CIRCULAIR FAN DUCT DESIGN -> ONLY WHEN USING BLTOUCH OR NO SENSOR It will not fit with the Tronxy style cube sensor.
Anet A8 upgrade E3D V6 Bowden Hotend
Hypercube Evolution Upgrade All Parts![AI3M X-Carriage Direct Drive Upgrade-Kit (BMG-Style) [MK4], a preview image from Thingiverse](/previews/thingiverse/4469339-0/card-ef29d1aff8d1b05a.webp)
AI3M X-Carriage Direct Drive Upgrade-Kit (BMG-Style) [MK4]Upgrade-Kit: AI3M X-Carriage MK4 - DIRECT DRIVE
E3D V6/Volcano BMG Ender 3 / 3 pro / 3 v2 / 5 Plus
Dual E3D v6/ Jhead Hotend Mount V 3.1 | X Carriage for Mendel, Mendel Max,Prusa and co.NOTE! The work on this Thing stopped since i got a different hotend now End After I searched and searched and I havn't found an x carriage for Mendel/Prusa so far, especially not a dual one and after all no E3D one, I decided, tu built my...![Ai3M X-Carriage [MK1] (E3DV5), a preview image from Thingiverse](/previews/thingiverse/3375679-0/card-14914e1f9fea503b.webp)
Ai3M X-Carriage [MK1] (E3DV5)New Version (Further Development) available!: AI3M X-Carriage MK1 E3DV5 Version First version (MK1) of my design of a X-Carriage for the Anycubic I3 Mega I designed it to get rid of the ugly original "block" carrier and mainly to improve...
Remix of Anet A8 Jan 2017 model Prusa X carriage remix
Prusa I3 Rework Bowden Extruder and Carriage with Inductive SensorHERE IS MY NEW HOTEND CARRIAGE, LIGHTER AND MORE COMPACT: This is a new attempt at a well balanced, lightweight, modular and easy to adjust and access bowden extruder for the Prusa I3 Rework and E3D V6 Hotend.
Bowden E3D V6 EVOLUTION - Clear View !Bowden E3D V6 EVOLUTION - With a Clear View on the Nozzle. The cooling fan is mounted behind the linear guide. Constuction is weight and force optimized. German version below. Extra fixing materials is needed.
Titan Aero head mount for Hypercube Evolution + AddonsWhat's that ?! Titan Aero extruder mount for Hypercube Evolution. I make some add-ons like : Probe (12mm diameter) retainer / Fanduct / BLTouch Retainer Work perfect with 25mm heigh motor (E3D one) Loosing only 16mm on X !
hesine anet a8 upgrade to E3D v6 bowdenTo mount E3D v6 without fan you need only "extruder holder" & "extruder holder part 2". -if u want add stock hesine radial fan, download "alternative part 2 extruder holder" & "dyfuzor" -if u want also add 40mm fan on top of radial fan...
E3D V5 hotend easy maintenance carriage for Felix 3D printerThis is a hot-end carriage to make the bowden tube E3D hot-end V5 compatible with the Felix 3D printer (1.5 and up). It's designed for the felix Printer, but can easily be adjusted for other printers as well.
ANET A8 E3D carriage
Ender 3 V2 SpeedDrive x BullseyeWhat it is The SpeedDrive is a direct drive mod which is compatible with a cooling mod that is the Bullseye, both made for the Ender 3 / Pro.
Superlite! Lightweight BL Touch Dual Bowden Extruder Lion Mount for Anet A8 & Prusa i3! *With 60mm Fan Adapter!*So here is the latest re-imagining of this mount! #Summary: - "Superlite" design up to 30% lighter weight than my other mount at same settings! 48% less weight if both are printed at the settings recommended.
E3D V6 hotend easy maintenance carriage for Felix 3D printerAfter lot of requests, I’ve updated the E3D V5 hot end carriage to the E3D V6 Hot end. The hot end clamp is completely redesigned, but the baseplate and fan duct are the same.
Dual Direct Drive all in one for E3D V6. Reprap Prusa i3 rework
Super Simple ANET A6 E3D Carriage for Bowden *EASY PRINT*This is a modified carriage for the ANET A6 to house the E3D V6 hotend using a bowden extruder. The carriage was designed to print easily with hardly any supports needed, and only requires a few screws for assembly.
E3Dv6 Bowden X-carriage mount V2 reversedWhile the original design is awesome, I've got the problem that im actualy loosing about 25mm of my Anet A8 print bed.
Simple Direct Drive Bowden ExtruderThis extruder is not use the idler spring. optimize the filament path, supports flexible filament such as ninja flex.
CR-10 / Ender 3 Direct Drive Stock Hotend, Extruder or E3D V6 all stock partsThis modification doesn't change working area of printer! I present my own design Direct Drive for BantaMount and stock Ender3/CR-10 parts.
Y-Splitter (2-3-4-way) direct and bowden to bowden E3D j-headE3D j-head Y-Splitter (2-3-4-way) direct and bowden to bowden Watch(hear mostly) the video of it doing the swaps here, (sry for the dark video, just made it to help someone, maybe it can help others.) all the code that is running in the...
My Anet A8 E3D V6 Mount (Stock Fans)After trying several other great ideas on thingiverse this is what I came up with. Its a remix of a few different mounts. I moved the fan to the side because where it was limits printing on the rear of the hot bed.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.