Thingiverse
Vase 840
- Creator (as listed at the source)
- _Steve
- Licence
- Creative Commons - Attribution - Non-Commercial - Share AlikeThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Household
- Likes
- 408
Overview
These pencil cups have the same basic foot print. One design has indentations going in and the other indentations coming out. They can be printed in vase mode, or spiralize outer contour in cura, or printed in normal mode. You can uncheck spiralize outer contour to print in normal mode, set top layers to 0, set infill to 0%. Bottom layers set to 3 or more. Set walls to 1 or 2 or more for a more sturdy vase if not in vase mode. Can be scaled to fit your needs. The vases in the photos are printed at 100% of the stl file at 92mm wide for X and Y and Z is 112mm tall. They have not been tested for being watertight and probably aren't printed in vase mode. If you make it, please post a photo, I'd like to see your print! All my designs have a copyright, you may not download and sell them. Tips are appreciated! Enjoy...
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
vase 505A pencil/pen vase for decorative purposes to hold pens and pencils, or anything else. It is 112mm tall and 91mm wide. The photo shows the vase printed in vase mode with 3 bottom layers.
Vase 974A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. The vase raises up from a saw tooth pattern to a circle. It's called a 'loft' using fusion360.
High-Top Sneaker PotTurn your desk or shelf into a street-style statement piece with this High-Top Sneaker Container ! This 3D printable model transforms a classic high-top sneaker into a functional hollow container.
Vase 969A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 110mm tall and 73mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is solid.
Vase 964A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 110mm tall and 66mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is solid.
Vase 979A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 110mm tall and 83mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is solid.
Vase 981A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 110mm tall and 74mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is solid.
Parametric Tube Container System (Tube + Cap + Extension)This fully parametric Fusion 360 model allows you to generate a tube container of any dimensions . The diameter is limited only by your printer’s build plate, and the total length can be made as long as you want using detachable extensions...
Sand Dune Plant pot and Planter - Vase mode designA new design inspired by the wind and sand of our planet (and other planets to). Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the...
Vase 650A beautiful flower vase for decorative purposes to hold artificial flowers. It is 165mm tall and 114mm wide. Print time approximately 5 hours 30 min. with a single wall. The photo shows the vase printed in vase mode.
Tetrahex Ripple VasePrint with 0 infill, 0 top layers, and 3 walls.
Kumiko Pen Holder - Desk OrganizerDesigned to enhance desktop storage efficiency, this pen holder combines an Elongated Hexagon shape with Kumiko-style , blending Japanese minimalism with practical aesthetics.
Vase 794A beautiful flower vase for decorative purposes to hold artificial flowers. It is 170mm tall and 106mm wide. The photo shows the vase printed in vase mode.
Mosaic Plant pot and Planter - Vase mode designA simple mosaic inspired geometrical plant pot for your house plants! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger...
Anti-sphere 2 Plant pot and Planter - Vase mode designWe know some of you have been waiting for this quite some time, so here it is! - The new Anti-Sphere Pot 2!
Dodecahex Ripple VaseA decorative vase.
Mosaic Chevron Ripple VaseA decorative vase.
Vase 08I've played a little bit with the pipe command in Fusion 360 and the result is a little set of vases (or perhaps containers for pencils, spoons etc.) that might be pleasing to you.
Bourbonic Tears Pot and Planter - Vase mode designAn antique inspired plant pot, with the fill of quilted fabric
Steel Wool Plant pot and Planter - Vase mode designA new interesting design perfect for your house plants
Modern Pineapple Plant pot and Planter - Vase mode designA new entry into the geometric plant pot series. And yes... We really like pineapples.
Seashell Plant pot and Planter - Vase mode designA simple seashell inspired plant pot - it is a part of the seashell collection available in our club. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer...
Vase 914A beautiful flower vase for decorative purposes to hold artificial flowers. It is 170mm tall and 95mm wide. Print time approximately 2 hours 50 min. with a single wall. The photo shows the vase printed in vase mode.
Plant Cell Plant pot and Planter - Vase mode designA biological plant pot design for all the nature science lovers out there! ~ Design collaboration with Azurefilm ~
VaseStand for a decorative vase, print on one wall "vase"
Modern Ribbed Vase Collection – 3 Variants IncludedBring a touch of modern elegance to your home with this decorative vase collection featuring clean lines, soft curves, and a striking ribbed texture.
Parametric Voronoi Sphere Pot and Planter - Vase modeA simple spherical vase and/or plant pot for your flowers and pots. The design is created using a Voronoi structure.
Switch Pot and Planter for House plants - Vase modeA simple yet very creative design. Fits great into modern interiors! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger...
Canister with screw on lid - moire patternInterior diameter is 3.0 inches / 76.2 mm. Interior height is 2.0 inches / 50.80 mm. No supports are required. The model responds very well to scaling in your slicer if you want different sizes.
Skull Pen HolderThis design is a sculpture of a human skull with holes in the forehead to hold pencils, making it look like the pencils are stabbing the skull. The eye sockets can be used to hold erasers.
Vase 707A pencil vase for decorative purposes to hold pens and pencils, or anything else. It is 113mm tall and 100mm wide. Print time approximately 2 hours with a single wall at print speed of 50mm/s. The photo shows the vase printed in vase mode.
Vase 911aA decorative vase to hold artificial flowers.
VaseVase with diamond pattern. No supports.
Lava Lamp Plant pot and Planter - Vase mode designLava lamps are so cool! So... why not making a pot like them! Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples, and we had the pleasure to review this...
Orbit Plant pot and Planter - Vase mode designSimple and easy to print - Looks great in a modern interior. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger...
Vase 10I've played a little bit with the pipe command in Fusion 360 and the result is a little set of vases (or perhaps containers for pencils, spoons etc.) that might be pleasing to you.
Octahex Ripple VaseThe model was printed with a .2mm layer height, 2 walls, 0 infill, and 0 top layers. I have not attempted to print this in full vase mode, so I'm not sure what the results would be like doing so.
Container Version of Vase RoseThis is the simpler version of my Spiral Vase Rose that is just the outside, and can work as a container.
Owl JarVersion one is designed for single filament printers. Version two (MMU) is designed for multi material printers.
Star Fireworks Plant pot and Planter - Winter ornament decoration - Vase mode designSome new fireworks are in the sky! Falling stars and such are to be seen! So, we wish you all a Happy New Year already!SliSearch lists public model details and links to the original source. It does not host files or verify licences.