Printables
Kayoumini Crown+ELRS Backpack
- Creator (as listed at the source)
- Seismograf
- Licence
- Creative Commons — AttributionStated at the source marketplace; SliSearch does not verify licences.
- File types
- 3MF
- Pricing
- Free
- Published
- Category
- RC & Robotics
- Likes
- 4
- Downloads
- 32
Overview
This is a backpack for the kayoumini, the Happymodel Crown antenna, and an ELRS T-Antenna.
An 18AWG power cable should fit on top, but I didn't test that.
There's a short and a long version. The short one is a quick edit in Meshmixer, because I suck at Fusion and couldn't figure out how to change the loft extrusion. It has a different angle, looks a bit wonky, but prints perfectly fine.
I printed it upright, with tree supports in TPU.
The picture shows the short version.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Kayoumini 8mm Backpack RushFPV Cherry IIThe backpack is designed for the RushFPV Cherry II but should fit with other RHCP antennas that are the same size. I also uploaded the STEP and F3D file if you want to edit the design.
Kayoumini Stronger Batterystrap Balance and XT30 ConnectorThe other designs I saw with a holder for the balance and/or XT30 connector had only one of the connectors on the strap or not at the right place.
Kayoumini Arm Protector Heavy 11xx Taller VersionThis is a taller version of the heavy bumper made by Kayou Frames. I modified the design because the bottom of the bumpers were at the same height as the bottom of the screws so I you want to do a few cool skids you'll damage the screws.
Kayoumini C03 20°/25° Camera MountI made a 20° and a 25° degree camera mount for the BetaFPV C03 cam. I couldn't find any good mounts for the C03 that looked like the original.
Kayoumini BT3.0 MountBetaFPV RA BT 3.0 connector mount for Kayoumini. Prints with supports. Tight fit all around.
Kayoumini C03 30° Cam MountKayoumini C03 30° Cam Mount w/ Integrated ORT Micro Vee and x14 ELRS antenna mounts. Remix from original. Prints with supports lens down. You will need the 40mm version of the micro vee when using the Happymodel x14 analog AIO.
Kayoumini HDZero AIO15 TPU battery straps + cable routingKayoumini TPU battery straps specialized for a HDZero AIO15 build using the included XT30 cable that comes with the AIO
Kayoumini 2,5 SammlungPlease pay attention to the thickness of the bottom plate when downloading. The original Kayoumini uses a 3 mm bottom plate.
Kayoumini 2.5" backpack for 15x4mm standoffs and 80mm Immortal TKayoumini 2.5" backpack housing XT30, default DJI O4 antenna and TBS Tracer Immortal T (80mm cable). Fits 15 x 4mm standoffs.
Micro 105 FPV Quadcopter - 8.5mm Motors, Micro SciskyThis frame was inspired by the FireFlo V2 and the Alpine Drones Micro H. My goals were to keep it crash resistant, light weight and offer good protection for onboard gear. It measures ~105mm.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.