Thingiverse
Ruler stop for steel ruler / Linealanschlag für Stahlmaßstab (25mm)
- Creator (as listed at the source)
- Fresh
- Licence
- Creative Commons - AttributionStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Tools
- Likes
- 228
Overview
First, this thing is inspired by - use some sandpaper to finish - perhaps you have to scrape some ABS with a knife at the recess for a tight fit - cut a M5 thread in the hole at the part without the 1mm recess - some black spraypaint - with a strong ABS glue, bond the two parts together (line up the holes with a set screw) - I used a set screw from an old miter saw (15mm in my case, 20mm max.) Be careful when tightening the screw. Its only a plastic thread!!! EDIT: I add 2 thumbscrew´s (M5 Imbus and countersunk). You can glue it in place with epoxy or fix it with a nut. Also I add another version of the ruler stop. Now you can insert an M5 nut.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
School Ruler Bundle (20cm and 18cm)This is a bundle composed of a 20 cm ruler and a 18 cm Square Ruler
reglettes 6 et 3 pouces
Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 1 to 12mmDesign reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case.
Rapid Metric Screw Measuring Tool (M2-M5, up to 50mm)No changes in this update, just a big thank you to everyone that's downloaded, posted a make, remixed, or re-shared this model! This was only the fourth model I shared and was the first ‘big project’ I took on while learning Fusion 360.
Self Centering GaugeThis is a device to get a centered marking, regardless of the width of whatever you want to mark. It works by placing the stopper on either side of the beam, bar, etc. and twisting the device until both stoppers touch the sides.
Iris Compass Circle Drawing (Easy to assemble)I Saw Makers Cabinet's IRIS and had to have it, but the I found how much it costs and decided to design a 3d printable version. Maybe someday I'll buy the real one :).
Parallel Marker Gauge (Edge Marker)Recently, I needed to do parallel markings to an edge, but I did not find quite the perfect tool for me. This is why I created my own version from scratch in OpenSCAD.
Lego RulerI created a LEGO ruler based on the original design back in 2009 by LEGO themself. I added different high levels to be able to see the plate and brick height a little better.
Spring Bending Tools – Create Robust and Durable SpringsCreate strong and long-lasting springs with these 3D-printed tools – perfect for your projects or the Wire Stripper Pro.
Drawing Line Ruler ver. 2.0replica of a model seen on the Internet. This version also has graduations from 5 to 5 millimetersSliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.