Thingiverse
I had to fix the position of the circular duct to fit with my Ender 3 S1 Pro Nozzle. Great upgrade to reduce stringing etc.
Chosen by shared tags first, then category. Each one links to its own marketplace.
There is a newer version of this thing which prints faster and is easier to assemble at this link: There is a Remix\Alternative Version of this thing here: Update:07\01\20 Uploaded a variation (E3_Spool Holder_V2) with extended fixing...
File types: STLLicence: Attribution
ThingiverseFreeFile types: STLLicence: Attribution
ThingiverseFreeNow compatible with the Ender 3 V2 This is a remix of my Side Mounted Spool Holder which prints faster and is easier to assemble. I have uploaded 2 variations they both effectively do the same job, one uses slightly less plastic.
File types: STLLicence: Attribution
ThingiverseFreeI recently bought the Ender 3 printer and started tinker already before assembling the whole unit LOL this Fan Duct Ring fits nicely and has some certain gap to extruder side and nozzle tip side effect/result still pending but should work...
File types: STLLicence: Personal use only
ThingiverseFreeKnob for the Z lead screw of the Creality Ender 3/Ender 3 Pro/CR-10 etc that has an 8mm diameter lead screw. Has a finger tip depression to enable fast "speed scrolling" of the Z lead screw to quickly traverse the Z range.
File types: STLLicence: Personal use only
ThingiverseFreeTHIS GUIDE IS MEANT TO BE FOR REFERENCE ONLY, AND NOT INTENDED TO SOLVE EVERY PROBLEM ONE MAY HAVE. I PERSONALLY CAN ONLY SOLVE ISSUES I HAVE EXPERIENCED OR ASSISTED OTHERS IN FIXING, BUT NOT ALL SIMILAR ISSUES WILL BE RESOLVED AS THE...
File types: STLLicence: Personal use only
ThingiverseFreeThese wheels have a locking mechanism built in so they remain where you set them indefinitely. I also prefer feeling that I should go up/down one or two clicks during the process of leveling, it helps me level much faster than I could with...
File types: STEP STLLicence: Personal use only
ThingiverseFreeFile types: STEP STLLicence: Personal use only
ThingiverseFreeCreality Ender-3 Series Rotary Encoder Knob Ender-3 Ender-3 Pro Ender-3 Max Ender-5 Ender-5 Pro CR-30 CR-10 Series CR-10 V2 CR-10 V3 CR-7 And the creality printers that use the same display and bezel. Inner Diameter 5.95mm Enjoy!
File types: STLLicence: Personal use only
ThingiverseFreeHi, If you download and use this, please give it a like and/or a collect! If you print it, please post a make with pictures of the end result! Thank you!
File types: STLLicence: Personal use only
ThingiverseFreeI developed this extruder to replace the stock one. It's based on Bulldog Extruder design. It's much more efficient than stock extruder.
File types: GCODE STLLicence: Personal use only
ThingiverseFreeI made a remix of where you can use the original nut from the Ender 3 spool holder. You also need to print 3 pcs of the Spool_Holder_Dowel_V1. Enjoy! * This print need support to be 100%*
File types: STLLicence: Attribution
ThingiverseFreeThis is a compilation of all my cable chain remixes in one place. Included are all the files you need but the original chain and mounts have not been modified.
File types: STLLicence: Personal use only
ThingiverseFreeFile types: STLLicence: Personal use only
ThingiverseFreeThere are newer versions of this thing here: Ender 3 & CR10 version Ender 5 version Background Although I really enjoy my Hydra Fan Duct design both my Ender 3 Pros have exclusively 4010 ducts with a Bowden system.
File types: STEP STLLicence: Attribution
ThingiverseFreeSmall & discrete mount for a rocker switch 6.5mm x 19mm) used to switch LED lights on/off. Designed to front-mount the switch unobtrusively on the side of the ender 3 control panel so that it is easy to reach and use, but also discretely...
File types: STLLicence: Personal use only
ThingiverseFreeThis is a remix: With these 3 pieces you will have your cable chain complete and well aligned.
File types: STLLicence: Attribution
ThingiverseFreeThis is a bracket for mounting the spool at the rear of an Ender 3. I really liked Chuck's design, which this is a remix of, but I just wanted to change a few things. Here's what I changed: The bracket sits about further out.
File types: STLLicence: Public domain
ThingiverseFreeSupport for the top of the Z lead screw on an Ender 3 3D printer. This is to prevent accidentally bending the lead screw by rotating it by hand unsupported.
File types: STLLicence: Personal use only
ThingiverseFreeI designed covers for the endstops to make my Ender 3 look a little nicer. You can use the original screws. I printed the covers for Z-/Y-axis upside down with support and a resolution of 0.12 mm.
File types: STLLicence: Attribution
ThingiverseFreeIf you Upgraded your Ender 3 Pro to Direct Drive you may want to attach a Filament Guide to your printer. Here's a simple solution. Note: The Hole where the FIlament goes through fits a Ø4mm PTFE Tube.
File types: STLLicence: Personal use only
ThingiverseFreeI previously had the Ender 3 pro OEM screen, which I went on to print storage drawers underneath it. Those provided great onboard storage. When I added the touch screen (I lost the ability to use those drawers).
File types: STLLicence: Attribution
ThingiverseFreeYet another in the myriad of tool holders available for the Ender 3. Uniquely however this is the only one that incorporates the excellent Needly-Holdy.
File types: STLLicence: Personal use only
ThingiverseFreeLATEST UPDATE: Pincher Version 2 has been added to the folder for those who would prefer to save a little filament and be able to remove spools even faster than before.
File types: STLLicence: Attribution
ThingiverseFreeSimple spool roller attachment for Ender 3 and others. It fits your existing spool holder, just need to drill two small holes to fix them in position. Superglue or epoxy could work as well.
File types: STLLicence: Attribution
ThingiverseFree❤ SATSANA ON STEROIDS ❤ All in One Direct Drive Fan Duct for CR10sPro / CR10 / Ender3 / Ender5 All in one = Satsana + Dual 5015 Fan + BLtouch + Bondtech BMG Clone This is a remix of the legendary Satsana Fan Duct who was first designed for...
File types: STLLicence: Attribution
ThingiverseFreeHey! I would like to share with you my enclosure system for Creality Ender 3. The size of enclosure depends only on your plexi dimensions, so you can use it for bigger and smaller printer as well.
File types: STLLicence: Attribution
ThingiverseFreeI designed this Direct Drive mount/adapter for my Ender 3, but it can be used on other Creality 3D printers with similar X-carriage plate, and Original / Aluminium extruder or (CR-10S PRO style) Dual Geared extruder with: Small / Big...
File types: STLLicence: Personal use only
ThingiverseFreeAn automatic nozzle cleaner for ender 3d printer series, you can find instructions below
File types: STLLicence: Personal use only
ThingiverseFree29\09\20 There is a newer version of this thing here: Edit 17\08\20: Just to confirm this will fit the Ender 3 V2 as well yet please note the V2 firmware does not appear to provide any refresh options in the firmware therefore currently...
File types: STLLicence: Attribution
ThingiverseFreeWARNING: when you wire in the fan, do NOT use the normal controllable fan port. Use the Hotend port which is always on. Using a controllable port + Buckconverter can blow the microfuse on your board.
File types: STLLicence: Personal use only
ThingiverseFreeThis casing is designed to give you the ability to fit two 5015 blower fans in a more aesthetic package, fit tighter to your extrusion carriage.
File types: STLLicence: Attribution
ThingiverseFreeFile types: STLLicence: Attribution
ThingiverseFreeAs an upgrade to my Ender 3 Pro, I got an Aluminum Extruder. The one I got was from Gearbest, but these are also easily available on Amazon (and for less money, and with Prime shipping).
File types: STLLicence: Attribution
ThingiverseFreeUseful design. This touch feelings very good, so I definitely recommend doing it. This is knob attachment for Creality 3D printers(Ender-3, Ender-3 pro, CR-10). *I don't know suitable for ender-5 and pro.
File types: STLLicence: Attribution
ThingiverseFreeThe new [[Gulfcoast Robotics] Creality Ender-3 Modular Y Carriage Plate] features additional bolt holes for mounting 3D printed accessories.
File types: STL
ThingiverseFreeFile types: STLLicence: Attribution
ThingiverseFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.
