This is a Vixen type dovetail clamp. It has been designed to hold light equipment such as a finder, Terlrad, GoPro, etc. It requires a M6 threaded insert to manage a proper tightening.
File types: STLLicence: Attribution
ThingiverseFreeThingiverse
100mm Guidescope Rings
- Creator (as listed at the source)
- jrcnelson
- Licence
- Creative Commons - Attribution - Share AlikeThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Learning
Overview
This is a 100mm ID Guidescope Ring that will fit to a Celestron Dovetail Rail.
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
ThingiverseFree
These are Vixen type dovetails. They are designed to hold light equipment such as DSLR cameras. I use it to place a DSLR on my equatorial mount to take wide field astrophotos.
File types: STLLicence: Personal use only
ThingiverseFree
This is a Agena Synta / Vixen style dovetail base specifically designed to fit in the stock finder scope mounting location on a Celestron PowerSeeker 114EQ Newtonian Reflector Telescope.
File types: STLLicence: Personal use only
ThingiverseFree
I designed a dovetail to fit in my Celestron Astromaster 130EQ, in order to avoid making holes on my tube to mount a star finder It fits perfectly between the two tube fixing rings, includes a standard synta dovetail dimensions and four...
File types: STLLicence: Attribution
ThingiverseFree
Sometimes can be usefull to use the computerized movement of cpc800 for compensate sideral movements to take a long exposure photo using wide angle normal optics of cameras So i create this simple hook to mount a camera on it.
File types: STLLicence: Attribution
ThingiverseFree
My APO only has one dovetail shoe and I needed more mounting options. This ring can accommodate three (lightweight) accessories.
File types: STLLicence: Attribution
ThingiverseFree
File types: STLLicence: Personal use only
ThingiverseFree
Celestron NexStar 127SLT Solar Filter – Easy-to-Print 3D Model This is a 3D printable solar filter housing designed specifically for the Celestron NexStar 127SLT telescope.
File types: STLLicence: Marketplace terms
MakerWorldFree
File types: STLLicence: Personal use only
PrintablesFree
This is a universal phone holder for the telescope. The holder is designed to be strong, durable, easy to print and without the use of any additional material, supports or glue 0.2 mm layer / 0.4 mm...
File types: STLLicence: Personal use only
PrintablesFree
Tri-Bahtinov masks help to achieve a very precise collimation and focus on telescopes. I have designed this mask to fit on Celestron C11 SCTs. Two version for the new chinese made celectrons and for the older ones are available.
File types: 3MFLicence: Attribution
PrintablesFree
Slow motion controle knob with a 6 mm shaft and a heat insert. I wanted a long beefy knob with good grip. I use this on my Vixen SP DX mount. There are different versions. Choose what you need.
File types: 3MFLicence: Personal use only
PrintablesFree
Remixed the original file by Spuddy at MakerWorld to reduce the wall height on the left side, so you can still easily grip the mount handle without crippling your hand.
File types: STLLicence: Attribution
PrintablesFree
This is intended to be printed "nose down" to get the rim to print cleanly. No supports. PETG recommended. My physical prints measured a millimeter or two smaller than the digital model was specifying.
File types: STLLicence: Attribution
PrintablesFree
These are tube rings with Losmandy dovetail that I'm using on my 6" (150mm) Newtonian astrophotography rig. They fit ø177mm tubes from GSO often resold under many other brand names. Bill of Materials
File types: STEP STLLicence: Public domain
PrintablesFree
Replacing a lost polar finder top plug from Celestron Advanced VX Mount (AVX). I'm working on restoring a Celestron Advanced VX Mount that is missing many parts and decided to share the models.
File types: STLLicence: Personal use only
PrintablesFree
Vixen Rail Mount for the Celestron EdgeHD 9.25 I wanted radius blocks for a Vixen rail to add some accessories to my EdgeHD 9.25 but wouldn't find any online.
File types: STLLicence: Personal use only
MakerWorldFree
Replacement of lost polar finder cup from Celestron Advanced VX Mount (AVX). I'm working on restoring a Celestron Advanced VX Mount that is missing many parts and decided to share the models.
File types: STLLicence: Personal use only
PrintablesFree
EdgeHD 9.25 Baffled Dew Shield This dew shield was designed for the EdgeHD 9.25 (though I believe it will also work with a non-Edge Celestron 9.25 (there are coupons included for a test fit).
File types: STLLicence: Personal use only
MakerWorldFree
Replacement of missing declination axis end cap for Celestron Advanced VX (AVX) mount. I'm working on restoring a Celestron Advanced VX Mount that is missing many parts and decided to share the...
File types: STLLicence: Personal use only
PrintablesFree
This cable router is designed for the Celestron RASA 8 telescope. It fits over the end of the camera body and guides 4mm diameter cables in an “S” shape as the cables cross the field of view.
File types: STLLicence: Personal use only
MakerWorldFree
100% infill, needs to be sturdy. 0.12 or adaptive layers prefered. make sure to tighten everything in well and get the camera as far in as it goes in the focuser, I found that you could thread the adapter a bit further in the m42...
File types: STLLicence: Personal use only
PrintablesFree
Universal drop-on desk rest for rail-mounted telescopes One reusable standard for the two common telescope dovetail families. Lower the telescope vertically until the outer load-bearing edges of its bottom rail rest on the broad TPU pads.
File types: SCAD STLLicence: Attribution
PrintablesFree
I wanted to keep my astrophotography gear assembled while I store/transport it in a Vevor telescope bag , but with the autofocuser and filter wheel, it wasn't realistically possible.
File types: STLLicence: Personal use only
PrintablesFree
I made a remix of the mount to fit my Skywatcher 150/750 but it should fit on any telescope that has the same focuser (or the same 2 to 1.25 inch adapter) since it clamps around that part.
File types: STLLicence: Attribution
ThingiverseFree
Bought a used 12-inch Dobsonian telescope over Christmas break. It came with all the bits, but the dovetail mount had a broken ear and wouldn't hold the finderscope in place.
File types: STLLicence: Attribution
ThingiverseFree
Slip this knob over the rubber focuser on your Celestron SCT. It fits mine as-is, but can be customized to fit a different size.
File types: SCAD STLLicence: Attribution
ThingiverseFree
This is a finderscope or laser pointer holder for an astronomical telescope. It will clamp in an Agena Synta / Vixen style dovetail base.
File types: STLLicence: Personal use only
ThingiverseFree
I needed dovetail for my telescope model, but did not find the model. So I created my own model and share it to all. The model has two mount holes of 4.5mm diameter and with 33.5mm gap.
File types: STLLicence: Attribution
ThingiverseFree
A double dovetail for telescope accessories. Is printed on PLA with 50% infill and 5 Outline/Perimeter shells. Some M4 screws and nuts are needed to keep accessories in place. Have fun!
File types: STLLicence: Attribution
ThingiverseFree
This is a holder for the 38mm legs on a Celestron tripod. It basically snaps on and keeps them from opening up during transport. I printed in PETG for strength and heat resistance, but you could probably do in PLA as well.
File types: STLLicence: Personal use only
ThingiverseFree
An attachment for your Telescope designed to hold 100mm (4") square sheets of solar filter. It will work with other filter sheets too of course. Read about the filter on instructables | Optional case to protect your filter when not in use.
File types: STL STPLicence: Attribution
ThingiverseFree
RA and DEC stepper motor mounts for a Celestron 130EQ telescope. * These are an early prototype, use with caution * * CAUTION - To use these you either need a lathe or be prepared to make permanent changes to your telescope mount.
File types: STLLicence: Personal use only
ThingiverseFree
File types: SCAD STLLicence: Attribution
ThingiverseFree
This is my version of a Vixen dovetail clamp, small size, useful to hold counterweights, telescope tube rings, finders, cameras etc.It has a central M8 threaded hole and four elongated holes for M6 head cap bolts.
File types: STLLicence: Attribution
ThingiverseFree
I own a CG-5-GT equatoral mount and everytime I have to polar align the mount, I have to knee on the floor, hold the tripod with one hand and use the other to point a red flahlight into the polar scope.
File types: STLLicence: Personal use only
ThingiverseFree
This is for the Celestron Astromaster 130 MD telescope. It may fit other equatorial mounts. EQ2 or EQ3? This mount moves the Motor drive out of the way so it doesn't cause interference.
File types: STLLicence: Attribution
ThingiverseFree
Replacement arm for the tripod on the Celestron 130 Series of Telescopes - may fit other models.
File types: STLLicence: Personal use only
ThingiverseFree
Vixen dovetail bars in multiple sizes. Includes one with a hole for a 1/2" tube to hold a counterweight. For more of my astronomical designs, see below!
File types: STLLicence: Personal use only
ThingiverseFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.