Printables
Festool Guide Rail Wall Mount Bracket
- Creator (as listed at the source)
- Mike Lingenfelter
- Licence
- Creative Commons — Attribution — Noncommercial — Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- 3MF STEP
- Pricing
- Free
- Published
- Category
- Organizers
- Downloads
- 3
Overview
Keep your shop organized and your guide rails off the floor. This is a simple, low-profile bracket designed specifically for Festool Guide Rails (FS series). It provides a secure horizontal storage solution that makes it easy to grab your track and get to work.
NOT meant to be mounted on a garage door. The vibration and movement of a garage door opening and closing will likely cause the rails to slip out.
Print Settings
For best results, I recommend the following:
Material: PLA works if your shop is climate-controlled.
Wall Loops: 3–4 for strength.
Infill: 25% or higher (Gyroid recommended).
Orientation: Print on its side for maximum strength across the "hook" portion.
Recommended Hardware
Screw Type: Designed to use 2x M5 wood screws (or equivalent Imperial size, such as #10 or #12 wood screws .
Quantity: Use at least two brackets per rail for stability.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Festool Parallel GuidesUse these brackets and stops to connect Incra T-Track Plus rails to your Festool Track Saw. This will allow you to cut large panels with ease!
Track Saw FenceAttachable Fence for tracks/guides from Festool and Makita for 90 degree rip cuts. One can attach a piece of plywood at the reference edge for a longer fence. Print instructions PLA 0.3mm layer height
Makita Track Saw Guide Rail ProtectionThis end piece clips very easily on Makita saw tracks. The bumpers can be clipped on one another for storage. Print instructions: PLA 0.3 mm layer height. No supports.
Makita Track Saw Parallel Guide Extension SetRepeatable rips with the Makita track saw This jig makes it easy to cut precise strips of exactly the same width when panel cutting. Two side fences are mounted on the guide rail.
Festool Track Saw Guide Rail ProtectionThis end piece clips easily on Festool saw tracks. The bumpers can be clipped on one another for storage. Print instructions: PLA 0.3 mm layer height. No supports.
Festool Double Guide Rail Holder TPU InsertThis is an accessory for the Festool Double Track holder . Festool designed a nice double track saw guide rail holder. But, the rails sit loosely in their holder. If you need a snug secure fit, print this!
Festo ATF 55 guide track insertReplacement for the original plastic guide rail segment on the vintage Festo ATF 55 circular saw series.
Festool Deflector FS-AWHello, this is my DIY clone of the festool deflector FS-AW Additional, you need a M4x16 hexanonal srew and a M4 hex nut
Festool Makita track saw deflectorHi there, here is my version of the festool / makita deflector. You just need to print the two files and to use M5 countersunk screw with its M5 nut. for more info: I just posted the related article on my blog!
Deflector for Festool guideing railsPrinted with 3D Jake - ecoPLASliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.