Fall Bezel Set – Maple & Oak Leaf, Acorn, Pumpkin

Acorn bezel

Pumpkin bezel

Each design prints as an open bezel that can be filled with UV resin, epoxy resin, glitter, mica powders, dried florals, foil flakes, or other decorative materials. Use traditional fall colors or completely change them up to match your own style.

The examples shown were printed in PLA and filled with glitter UV resin, followed by a clear resin topcoat for a glossy finish.

These designs include built-in hanging loops, making them suitable for keychains, bag tags, ornaments, seasonal decorations, and other fall craft projects.

Printing Information

No supports required

Print flat on the build plate

PLA recommended

Designs can be scaled to fit your project

Scale carefully if adding pre-sized decals, vinyl, or inserts

Two build plates are included in the file: One complete set with built-in hanging holes

One complete set without hanging holes for projects where a loop or attachment point is not needed

Additional Supplies Used in the Examples

UV resin or two-part epoxy resin

Glitter, mica powder, foil flakes, or other resin colorants

UV DTF decals, vinyl, or stickers if desired

Jump rings, chain, or keychain hardware

Resin tape or another temporary backing material

Included Designs

Maple Leaf

84.80 x 89.41mm

3.34" x 3.52"

Oak Leaf

54.04 x 98.59mm

2.13" x 3.88"

Acorn

65.80 x 82.12mm

2.59" x 3.23"

Pumpkin

101.67 x 99.19 mm

4" x 3.91"

You can fill each section with a single resin color or use multiple colors, glitters, and effects to create completely different looks from the same files.

I also have short process videos on YouTube and TikTok showing my process for 3D printing bezels and filling them with UV resin and glitter.

I also have a full-length tutorial on YouTube showing the complete 3D printed bezel and UV resin process.