Thingiverse
Ender 3 Damping Feet
- Creator (as listed at the source)
- redmaxver
- Licence
- Creative Commons - AttributionStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- 3D Printer Accessories
- Likes
- 9,732
Overview
Dampening feet for the Creality Ender 3 printer. Couldn't find any for it yet so here's a model I made for my own. Had originally made the feet wider but the stiffness was a bit too much. I find these to work well for the weight of the printer... Print each part individually on its side. Then simply slot them together. Enjoy!
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Ender 3 v3 SE/KE simple soft anti-shake feet (TPU)Technical background: Input Shaping on Klipper can be tuned with G-Sensor. When using a rooted Nebula Pad FW, the tuning produces the measured vibrations profile .csv and suggests shaper settings + max acceleration under these settings.
Ender 3 MAX - Feet Vibration DampenersThese Ender 3 MAX vibration dampers are dimensioned to be assembled on the Ender 3 Rubber Feet profile. Both clips have reveals in them that slot together.
Vibration Isolating Feet (Ender v3 SE)(NOTE This is specific to the Creality Ender 3 v3 SE style bottom plate and OEM feet. may require modification to top-half pieces for other printers) This design features a rigid top and bottom half of each foot separated by a buffer cast...
2020 / Ender 3 Filament GuideSnap In Guide, Many to choose from! The Base Will fit tight but should not need any trimming, tested at a few resolutions. Once its in the aluminum just click your guide in and call it a day.
Ender 3 Display LCD PCB CoverA tip as appreciation is welcome. Backcover for the new Ender-3 Display. Hi, i used four countersunk (2x M3x10 / 2x M3x16 (M3x18 work too) 02.12.2018 added a new version on request from "DOC73", a version for 3 plug use.
ENDER 3 FACTORY SCREWS display rear coverremix for the display rear panel cover to use the factory screws. I dont have a convenient local screw store near me so every time I have to get special screws for any part i get bothered, in this case it was fairly easy to remix to use...
Ender-3 Z-motor spacer / support
Creality Ender 3 PRO - Feet Noise DampersThis is a remix of which is a remix of I like the small "islands" added by jorge_rui for silicon buttons to help on the dampening. But it misses those extra support bars the original has.
Ender 3 V2 Riser Feet 25 & 35 mmMy take on feet risers for the Ender 3 V2 that use the OEM rubber feet with a lightweight style. I've also included a solid style version which takes around 30% less time to print, but you will lose the cool points with those.
Ender-3 Cable ProtectorThis will smooth out the passage on the 20x40 frame underneath the bed where the cables sit to prevent them from rubbing on the sharp edges of the frame. Simple push fit design.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.