Printables
Headphone Hanger (Undershelf) for Ikea Lack
- Creator (as listed at the source)
- jm.design.studio
- Licence
- Creative Commons — Attribution — Noncommercial — Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- 3MF
- Pricing
- Free
- Published
- Category
- Office
- Likes
- 2
- Downloads
- 6
Overview
Simple under-shelf headphone hanger designed to fit tightly on the IKEA Lack wall shelf units (50mm).
I tried another but didn't like that it was in front of the shelf and it didn't grab the shelf hard enough. This one has zero fillet radius on the inside corners and is slightly less than 90deg in the top inside corner to increase clamping force. This design avoids the need for drilling and screwing.
I printed at 100% size with PETG at 10% infill and it took around 40min total. No supports, no brim, no nothing.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Headphone Hook improved for different shelf thicknessThis thing is an improvement/remix of the one made by "Misguided" on Feb 9, 2011. The original design allows to hang the headphones under your office desktop.
Hanging Headphone Holder - Ikea HAUGA - ROBUSTIKEA HAUGA Desk Hanging Headphone Holder - NOW MORE ROBUST! When I say “Robust” I mean I just expanded the thickness a bit for those who have heavier headphones, or just want to put their body weight on it… Actually don't do that.
Skadis Headset HookPrint on flat surface as shown in one of the pictures and use support for the hooks. You can enable ‘variable layer height’ for a smoother print.
Strong cable clip for IKEA Kallax, Besta, and othersI tried similar models from printables.com, but they all had bad tolerances or weak grip strength, so I designed my own. In the second photo, I stacked 200g worth of stuff on the clip and it didn't move.
GEN2 RYOBI Tool Holder⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs.
Modular Pegboard - 100% Parametric DesignThis is a simple strong pegboard/shelving system that is easily 3d printable or laser cuttable.
Honeycomb Headphone Stand (Holds 2) — Two-Part Clip-On DesignHoneycomb Dual Headphone Holder A clip-on headphone hanger that mounts to the top edge of a shelf or monitor stand and holds two headphones at once — perfect for desks where one pair isn't enough (gaming + work, his + hers, wired +...
Under-Desk Headphone, Cable and USB HangerMounts under the desk edge and gets the headset, the spare cables and a few USB sticks off the desktop entirely.
Ikea Lack shelf supportNot mutch to say ...just print it (I used PLA 3 walls top and bottom 20% cubic infill)
Headphone Headset Under Shelf mount holder hangerA hanger for 2 headsets/headphones I used double-sided tape to fix mine, but you can use screws with the screw version file. Use 4 to 5 walls and 40% to 50% infill to make a strong piece. All my designs are protected by Copyright Law.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.