Thingiverse
This Mount/Case is going to be used on a project I am working on for school. I thought i would put it up in case anyone else wanted to use it.
Chosen by shared tags first, then category. Each one links to its own marketplace.
A compact 3D-printable servo mounting system designed for the HC-SR04 ultrasonic distance sensor. The mount allows the ultrasonic sensor to rotate with a servo motor, making it suitable for Arduino robots, obstacle detection systems...
File types: STLLicence: Marketplace terms
Cults3DPaidThis is a casing & supporting cradle for HC-SR04 (Ultrasonic Distance Sensor). Key features: No screws or adhesive need to assemble the unit itself.
File types: STLLicence: Attribution
ThingiverseFreeTeach students how to use ultra-sonic sensors to program a simple obstacle avoidance robot! Lessons and a sample code are attached in the thing files. Scroll Down for the activity information.
File types: STLLicence: Attribution
ThingiverseFreeIn some countrys it is difficult to get the motors for the 3d printed robotic lawn mower from I tested alternative motors for the drive system and for the cutting device.
File types: STLLicence: Personal use only
ThingiverseFree28BYJ-48 Stepper Motor Horn A simple 3D-printable stepper motor horn designed for the popular 28BYJ-48 geared stepper motor .
File types: STLLicence: Personal use only
MakerWorldFreeThis thing has been replaced by this A bolt together modular tank style robotics platform! I use this with my students. They get the base kit, then they customise.
File types: STLLicence: Attribution
ThingiverseFreeThe MeArm is a low cost robot arm. It is designed to be light weight and inexpensive - to be the perfect introduction to robotics.
File types: DXFLicence: Attribution
ThingiverseFreeHere you have a small robot I have done for a special holiday course for children. In 6 week, 2h/week they have finish all the robot The cost is around 20$ per robot of material They can modify the top with tinkercad they can start...
File types: STLLicence: Attribution
ThingiverseFreeMy latest tankbot has been designed to be a larger vehicle but printable on a small scale printer. A number of issues with the other tanks have been overcome (hopefully) with this one.
File types: STLLicence: Attribution
ThingiverseFreeThis little tank is designed to allow my students to prototype their robotic ideas. It has some significant improvements over my previous versions of tracked robots.
File types: STLLicence: Attribution
ThingiverseFreeThis a rover platform that you can assemble choosing among many blocks that fit in the same mounting points, so you can adapt the design to what ever fits your needs the better.
File types: STLLicence: Attribution
ThingiverseFreeThis is a remix version of the FPV-Rover V1.21 and FPV-Rover with increased clearance, raised front gear and reinforced hull.
File types: STEP STLLicence: Attribution
ThingiverseFreeThis happy little robot is designed to enable my students to mount their Raspberry Pi, connect up and program away. The little stepper motors don't drive him very fast, but he is very reliable and the battery life is impressive!
File types: STLLicence: Attribution
ThingiverseFreeThis is the second version of my Rover Tracks design. Many small issues were solved following the recommendations of the people that already built the first version of it.
File types: STEP STLLicence: Attribution
ThingiverseFreeThis is a mounting bracket for the HC-SR04 sonar range finder. This bracket is designed to have the rangefinder snap into place and protect the sensor from shorts.
File types: STLLicence: Attribution
ThingiverseFree[UPDATE: I've been working on an improved (and compatible) version of this rover tracks, if you are planning to build this, please check the newer version first at This is a self-contained 3D printable rover track that can be reused on...
File types: STLLicence: Attribution
ThingiverseFreeJD is a 3D printable biped humanoid that clips together with EZ-Bits. You can change the appearance and build of this robot by connecting the parts differently to build any configuration.
File types: STLLicence: Personal use only
ThingiverseFreeEin kleiner Bausatz für ein Arduino-gesteuertes Kettenfahrzeug (mit Quellcode für Arduino IDE). A small kit for an Arduino controlled vehicle (with source code for Arduino IDE).
File types: STL STPLicence: Personal use only
ThingiverseFreeThis little robot is based off David Hrbaty's great little Ardubot and This is in turn based off the MiniSkybot Robot V1.0 so the bulk off the assembly instructions can be found there.
File types: SCAD STL
ThingiverseFreeNatV2 is a low cost desktop robotic arm, open source and used with educational purpose. Based on a IRB 760 ABB Robotic Arm Elements required: 3 Servomotor MG995 or equivalents 2 Servomotor SG90 1 bearing 6203 screws M3 Note that you may...
File types: STLLicence: Personal use only
ThingiverseFreeIn this project we’re building an Ultrasonic Ruler! Inspired by Dune, this Harkonnen pistol is a rare movie prop that was never seen in film. A stylized enclosure makes this distance sensor into a hand held sonar measuring tape.
File types: STLLicence: Attribution
ThingiverseFreeArduped 2 is a tweaked version of David Ultis's Arduped Biped Robot that includes source code by Gabriel Ro-Bot-X and Kai Neugebauer to make it work.
File types: STLLicence: Personal use only
ThingiverseFreeKINEO ist ein Roboterprojekt aus Deutschland Die Servos werden mithilfe eines Arduino Uno angesteuert welcher per I2C mit einem Raspberry Pi (Model A, B oder später B+) kommuniziert.
File types: STLLicence: Personal use only
ThingiverseFreeThe "SoC ExoSkeleton 2.0" FULLY CUSTOMIZABLE *(Now redesigned for RavPower RP-PB41 - 8+ Hour tested Battery life!!!)* New Features: -- Larger Battery Compartment, sized exactly and snug for the RP-PB41 Battery.
File types: STLLicence: Attribution
ThingiverseFreeThis is a simple project to light following arduino robot. I design this on Fusion 360 and the ideia was to simplify the place to put the components. I hope you enjoy !
File types: STLLicence: Personal use only
ThingiverseFreeLeggere relazione allegata (Read attached report) date un'occhiata anche alla versione per la gara: Lo scopo di questa prova è di progettare e realizzare un robot capace di muoversi autonomamente alla ricerca di sorgenti luminose collocate...
File types: STLLicence: Personal use only
ThingiverseFreeBrazos para micro servos de 1, 2, 4, 6 y 8 extensiones respectivamente. Hecho para microcontroladores de servos.
File types: STLLicence: Attribution
ThingiverseFreeThe Brunel Hand 2.0 is an advanced, lightweight and precise robotic hand for researchers. With a low cost and open source design, this fully articulated device is primed to revolutionise the future of robotics research.
File types: STLLicence: Attribution
ThingiverseFreeBrazo Robótico impreso en 3D by FABRI creator Diseño: Subscríbete! Hola Amigos, en este video haremos un brazo robótico con Arduino y controlado con una aplicación, pero esta vez vamos a poder utilizarlo de manera autónoma ya que podremos...
File types: STLLicence: Attribution
ThingiverseFree* NOTE THIS FILE IS GOING TO BE GETTING UPDATED MULTIPLE TIMES FOR THE NEXT FEW DAYS. I PLAN ON FINISH THIS BY 5/20/19 SO IF YOU DOWNLOAD THIS FILE NOW, PLEASE HOLD OF ON PRINTING ANYTHING AND CHECK BACK OFTEN.
File types: SLDPRT STEP STLLicence: Attribution
ThingiverseFreePedro Robot 2.0 new version is now available: Pedro Robot is an Open Source Robotic Arm 4 axes designed in France and fully 3D printed.
File types: STLLicence: Attribution
ThingiverseFreemy version of a mini nes. holds pi3 model B. id ask, if anyone makes this, please post as "made" id like to see it. EDIT!!!! i fixed top ventilation with "v2" :) let me know if any more changes need to be made updated again to v4!!!
File types: STLLicence: Personal use only
ThingiverseFreeYet Another Ramps Box. This is a derivative of two people's boxes: jman's - and oTTo's - My RAMPS 1.4 board came from a vendor who had some different connectors.
File types: STLLicence: Attribution
ThingiverseFreeFile types: STLLicence: Personal use only
ThingiverseFreelIf you have made this thing, PLEASE take pictures and post! Thanks. Hello. because I can not get to know the same language first. I know little about english language ... :) I have inspired this project from another user.
File types: STLLicence: Personal use only
ThingiverseFreeHere is the last version of my 3D printed PLA hexapod : Gilbert300. Watch its first walk : The body : - 2 main plates naed "body-V2" and "body-V2-upérieur" - 6 x "entretoise-V2" - 1 "support_ubec_fan_switch" - 1 "deck arduino" (that...
File types: SCAD STLLicence: Personal use only
ThingiverseFreeI create this case for my 4 channel relay. i add a possibilty to fix the wiring to make it more save, so i have a better feeling when i leave the printer alone :) in the downloads you find also a holdingarm, it fits perfekt for 20x20 alu...
File types: STLLicence: Personal use only
ThingiverseFreeInspired by the Bq Ciclop and the B.Owens Piclop, I have begun my re-mix of this project combining the framework of the Ciclop printed pieces and the work others have done in utilizing the Raspberry Pi to drive this scanner.
File types: STLLicence: Attribution
ThingiverseFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.
Printables