Creality Cloud
Base for Sunlu S2 Fila Dryer, moveable or fixed mount
- Creator (as listed at the source)
- StonXX
- Licence
- CXY-SLStated at the source marketplace; SliSearch does not verify licences.
- File types
- The marketplace does not list the file types.
- Pricing
- Free
- Published
- Category
- 3D Printer Accessories
- Likes
- 74
- Downloads
- 74
Overview
Mounting plate for the Sunlu Filament Dryer S2. This plate can be used alone to secure the dryer or with the included sliding bracket. The dryer can also be attached to the printer using the two screws on 20x profiles. The sliding mechanism allows you to mount the dryer on a narrow shelf, as shown in the pictures. When the dryer is slid forward, it is held in place by the attached mushroom-shaped bracket, allowing for easy opening of the lid. Two Screws M5x12 and 2 Nuts M5 needed. Mounting plate for the Sunlu Filament Dryer S2. This can be used alone to secure the dryer or with the sliding bracket. The dryer can also be attached to the printer using the two screws on 20x profiles. By sliding it, you have the option to mount the dryer on a narrow shelf, as seen in the pictures. When the dryer is then slid forward, it is held in place by the attached mushroom-shaped bracket, allowing you to open the lid without any problems.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Sunlu FilaDryer S2 Tray for CFS Silica Gel ContainerSUNLU FilaDryer S2 insert for drying silica containers for the CFS Up to 6 containers can be dried simultaneously in the Sunlu. To avoid warping, use a heat-resistant filament such as ABS or ASA.
Core One L Sunlu E2 MountPrinted in Siddament ABS-GF ORANGE Supports only for the Standoffs I used a Brim but may not be required
Silica Gel Container for (CFS) Filament Spools and othersThe silica compartments in the Creality CFS system are not particularly large. Alternatively, there is still space in the filament spool core. Therefore, you can insert these filled containers here.
Nexus: CFS Sunlu Active Dryer AdapterWhy can the "other brand" people enjoy this active dryer and not us? Well, finally the nexus active dryer adapter is here! The adapter is compatible with the Creality CFS and the Sunlu AMS Heater . Bonus Feature!
PolyDryer Splitter Mod – Dry Two Spools at OncePolyDryer Splitter Mod – Dry Two Spools at Once Thanks to this mod, you can dry two spools at the same time using a single PolyDryer unit.
Air Gap Spacer For Sunlu S2 Filament DryerIf you own a Sunlu S2 filament dryer, then you probably know that the lack of a fan prevents the humid air from being properly circulated out of the box.
Sunlu Dryer Box filament guideI needed to place the DryerBox above the printer but the stock hole did not guarantee a correct passage of the filament, so I created this filament guide. I also inserted a template to make the holes on the box.
SUNLU Filament Dryer Lid StopThis snaps on to the dowel of the lid. It prevents the lid from opening too far. Now lid opens only 95* Added version that prevents empty dryer from tipping backwards.
Sunlu & eSUN filament drybox - holders for hygrometer without drillingThese are the mounts of the LCD FY-11 hygrometer (in the housing) in the eSUN or Sunlu filament drying box without the need for drilling and screwing. Update 15-11-2020.
sunlu FilaDryer S1 FanFAN for Filament Dryer S1 ====================================================== It is FAN holder for better heat distribution on drybox. There are two wariants. One version with step-down cirquit and second without.
Filament Feeder Grommet - Sunlu DryerThis is a quick little grommet to improve the feeder hole on a Sunly FilaDryer S1. The factory opening felt a little abrasive on the filament and when it sat the for long enough it seemed to fracture the filament.
SUNLU S1 FilaDryer 20x20 Mount + GuideThis is remixed from: Use these brackets to hold your Sunlu S1 FilaDryer on top of your printer, bolting onto the 20x20 aluminium. One version has a curved leg to add a M6 PTFE connector so you can use some Bowden tube as a guide.
Bambu Lab AMS Active Filament DryerConvert AMS to active filament dryer and store 4 rolls of filaments without having to take them out for drying.
SUNLU Dryer S2 ModThis improved version is designed to prevent the filament from falling off the roller when the filament material is exhausted and to roll well without resistance.
Sunlu S2 Tabletop TrayMy Sunlu S2 would sometimes tip over towards the extruder so I decided to use the original tray to hold the dryer next to my printer. Didn't need the holes to mount it so I filled them.
Grommet and stopper for SUNLU FilaDryer S1 Filament DryerA grommet and stopper to close off the filament holes for the Sunlu filament dryer. The included rubber stopper doesnt stay on very well. I used tree support for the grommet.
Sunlu S1 Dryer Lid Rest v2Remix: - Update: - V2, No major changes but bought another Sunlu box and in doing so noticed my template was 2mm too wide to fit between the lid mountings and changed the inner portion from threaded to a larger hole that cuts a thread on...
Mount for Sunlu S1 Filament DryerWall mount for the Sunlu S1 filament dryer.
Sunlu dryer filament guideA Sunlu S2 filament guide. Needed: 1x 608Z bearing I used Sugru for attaching Link .
Sunlu dryer - remowable hygrometer holder with PTFE PC4-M6 filament feederAfter suffering with the original version, I made an easily removable holder with this modifications: - filament feeding angle into the feeder 35 degrees with a flat channel along the entire length - more easy and quick installation...
Sunlu Spool Desiccant Dryer InsertInsert for Sunlu 3rd generation reusable spools that allow you to dry your dessicant (silica gel) in AMS or other spool dryer. I use (and recommend) using organza bags for your silica gel.
CC2/CC1 spool mount/adapter for Sunlu S4 filament dryerAn adapter so that you can put Elegoo rewind spools from CC2 in the Sunlu S4 drier. Without rewind, color changes will cause a tangle. Print the included adapter for use with CC1 spools.
Art deco style Centauri Carbon Sunlu S1 mount / holderThis holder lets you lift your Sunlu S1 off the desk/table/whatever and suspend it on the CC itself. I couldn't find one I liked online, but I took inspiration from one I found and started again with a new...
Sunlu E2 Dryer Internal Spool HolderI had severe jamming issues when using my Sunlu E2 dryer and 3Kg spools. The spool get angled within 2 minutes of a print. The spool then jam and the printer start to air print or start to severely under extrude.
Creality Space Pi Mod/Fix with lower humidity holeI lowered the humidity inlet/oulet because my spools where scratching on it. The photo with the white abs version is the original with scratches on the oultet from the rubbing spools. The purple one is the new one which worked for me.
Sovol SH02 filament dryer fan swapIMPORTANT: To install new fan with a duct I needed to cut out a bit of plastic so the new duct could fit. Not difficult to do with flush cutters, but this voids your warranty. I needed to swap fan connectors because they were different.
Sunlu FilaDryer SP2 Filament Riser NEW SP2 NARROWThis is a remix of DukeGaGa's excellent model here resized to fit the latest FilaDryer SP2 - they changed the post spacing at some point (more narrow), and his model is no longer compatible, and nobody has uploaded an update.
Prusa XL Series: SICCO BOX - The PRUSA XL drybox Bottom Hot Pipes ChangeHi i bought and build the great mod : I saw that the Hot Pipe doesnt ffit the newer models of the sunlu dryer so i modified the pipe. Now the newer models also fit without the need of a slimmer Fan.
Filament Spool Hub Dry for SunluCompatible with Sunlu new and old reel Dimensions: - In Ø55mm / Dry*_Sunlu_Gen3.stl / Sunlu Gen3 - In Ø62 mm / Dry * _Sunlu_Gen2.stl / Sunlu Gen2 - In Ø72mm / Dry * _Sunlu_Gen1.stl / Sunlu Gen1 Print Settings: - Filament: PLA+ - Height...
Sunlu Filament Connector Helper RemixAfter my original remix found its way here via dark channels through Thingy, I'm now posting my work here myself, before one of the "copy/paste designers" gets the idea to charge you for it.
Airflow CFS Desiccant Mod* K2 Plus and other large-format printers, use Bin.stl * Standard-format printers, use the Left Bin and Right Bin .stl files * The Pocket and Lid .stl files are universal * Both formats are available as .3mf project files above - all files...
Creality Space Pi Dryer Upgrade with Quick Connector V2This is an upgraded remix of the original Creality Space Pi Connector, designed to offer a stronger and more efficient connection.
Silica Gel Storage inside the Filament's SPOOLDesign Concept This model is designed to hold silica gel for storage inside a filament spool, keeping the filament dry and ensuring optimal storage conditions.
Filament Trockenbox Filament dry boxAuf der Suche nach einen Behälter für meine Filamente.Weil einige Kunststoffe Feuchtigkeit aus der Umgebungsluft aufnehmen, wie zb (PLA / PETG / ABS / TPU / NYLON /....) habe ich bei Ikea eine passende Box gefunden, in der ich eine...
SUNLU S2 Dryer NetTwo models for SUNLU S2 Dryer that can hold variety of things needed to be dried such as renewable silica and more. Thinner model is as wide as standard filament roll of 1.75mm 1 kg.
Creality Space Pi - Air Vent Gap SpacerCreality Space Pi is a nice filament dryer. However, there is one major flaw (similar to some other dryers, like Sunlu S2) - it does not vent out the humid air.
Hygrometer for Filament Dryers (Sunlu S1 and eSun eBox)Add Hygrometer to Sunlu S1 or eSun eBox filament dryers. No drilling and no extra screws required
Creality Space Pi spool holderIf you're doing any kind of reverse Bowden thing, you know that any resistance when pulling filament into the extruder is a bad thing, and the Space Pi's dinky little 624Z bearings with their 4mm ID and shafts have an awful lot of...
Sunlu S2 PTFE ConnectorThis can fit on the front or back filament output. Sized to fit PC4-M10 fitting. The hole in the dryer lid needs to relieved slightly for the PTFE tubing to fit without interference.
Sunlu S1 Filament Dryer Lid SupportWas able to pick up the Sunlu S1 at a discount, but was annoyed the lid would go flying back every time I opened it and was concerned it was going to shatter. The updated design can be printed without supports.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.