Printables
Ender 3 V3 SE Lighter Fan Shrouds
- Creator (as listed at the source)
- Forrest O.
- Licence
- Creative Commons — Attribution — Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- GCODE STL
- Pricing
- Free
- Published
- Category
- Creality Parts & Upgrades
- Likes
- 149
- Downloads
- 1,614
Overview
3rd photo shows how it should be laid out. Takes similar inspiration from another shroud , but is designed around the shroud being remixed. Supports aren't needed, but it may look nicer if printed with ironed supports. If you're looking for a 2150 to 4010 fan shroud that pairs well with this, you can find it on my profile or here .
Instructions:
Step 1: On the old fan shroud, remove the three screws holding it on (one is on the left and two are on the right) and pull off the stock shroud.
Step 2: With the stock shroud removed, screw in the screw on the left into its slot for safekeeping (not required but recommended). Remove the 4 Phillips screws for the fan and remove the old air duct.
Step 3: Slot in the new duct. With the 4 Philips screws from earlier, have the fan placed on it (with the duct facing the bottom of your new shroud).
Step 4: Line up the screw holes with the old screw holes on the extruder. Use the two screws from earlier to screw it in.
And it’s in! Enjoy your new shroud!
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Ender 3 V3 SE Single 5015 FanPrint Settings Printer Brand : Creality Printer : Ender 3 V3 SE Supports : No Layer Height : 0.2mm Infill : 20% Filament : PLA
Ender 3 V3 SE 25mm to 40mm fan shroudHey! Created a simple 3D model to help with the noise from 25mm stock fan. Swapped it for a quieter 40mm one. Just so you know, I'm not a 3D expert - just trying to make things less noisy.
Simple gantry support (metric/inch), Z-brace for Ender-3 V3 KE/SEThis gantry support eliminates wobble of the weak frame. It is designed for and tested on the Creality Ender-3 V3 KE. But users told me that the support also fits the SE model perfectly.
Ender-3 V3 SE filament guideThis filament guide is suitable for the Ender-3 V3 SE and can be installed in place of the spool mount on top of the frame. Make sure to print the right files that match the outer diameter of your PTFE tube.
Tool holder for Ender-3 V3 SE/KE (supportless)The design history of this part can be found at the end of chapter 'How I Designed This'. ---- Description This holder is intended for the tool kit that comes with the Ender-3 V3 SE/KE.
Cable Clamp for Ender-3 V3 SE/KE (supportless)The design history of this part can be found at the end of chapter 'How I Designed This'. --- Description This cable clamp guides the ribbon cable not only upwards but also straight backwards. This means the printer takes up less space.
Official Ender 3 V3 SE Bed level testThe original author of this test contacted Creality directly to get this bed leveling test. He also created a video testing the bed leveling and showing all the findings: The gcode file was downloaded from...
90° Spool Adapter for Ender-3 V3 SE/KE Reel armWith this adapter it is possible to rotate the reel arm of the Ender-3 V3 KE and SE by 90°. As a result, the center of gravity of the filament reel is no longer outside but above the gantry bridge so that the latter is no longer twisted.
(UPDATED) Ender 3 V3 SE Vent Ring(UPDATED) Re-made the ring from scratch. 1 - Fixed the gap issue between the fan and ring. 2 - Now has 3 more vents than the original, with much less back flow through the fan (still a little, but not bad).
Ender 3 v3 se cooling tuning to 40mm and dual 5015 fansThis is my version of Ender 3 V3 SE cooling upgrade to dual 5015 fans, 40mm silent hotend cooler and LED (optional). I decided to use 12V 4010 cooler due to was planning to connect LED to the same DC-DC step-down converter.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.