Thingiverse
Remix of Meade Autostar holder for LXD75/LX90 mount
- Creator (as listed at the source)
- GeoDave
- Licence
- Creative Commons - Attribution - Non-CommercialStated at the source marketplace; SliSearch does not verify licences.
- File types
- SCAD STL
- Pricing
- Free
- Published
- Category
- Learning
- Likes
- 35
Overview
This worked pretty good as it was, but I wanted to soften some of the sharp edges & also added 1mm extra around the holes. I used 2 - M3x16mm screws with locknuts & printed at 40% infill with eSUN Silver PLA Pro.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Meade Autostar holder for LXD75/LX90 mountThis holder is made for the 50mm tube of the LXD75 mount. Update 2026: New design for 38mm tripods. I will update the original design soon because that one is badly designed :).
Slow motion control knob for 6 mm shaftSlow motion controle knob with a 6 mm shaft and a heat insert. I wanted a long beefy knob with good grip. I use this on my Vixen SP DX mount. There are different versions. Choose what you need.
Vixen Dovetail ClampThis is a Vixen type dovetail clamp. It has been designed to hold light equipment such as a finder, Terlrad, GoPro, etc. It requires a M6 threaded insert to manage a proper tightening.
Vixen DovetailThese are Vixen type dovetails. They are designed to hold light equipment such as DSLR cameras. I use it to place a DSLR on my equatorial mount to take wide field astrophotos.
Celestron Motordrive mountThis is for the Celestron Astromaster 130 MD telescope. It may fit other equatorial mounts. EQ2 or EQ3? This mount moves the Motor drive out of the way so it doesn't cause interference.
AstroPi case with Synta mountNow you can mount your RPiB+/2/3 on your OTA. If you are using any of the RPi astronomy tools to manage your scope or autoguider you can put your RPi on the OTA itself.
Meade ETX-125 Red Dot Finder Dovetail MountMeade ETX-125 Red dot finder Dovetail Mount This is a bracket of my devising allowing me to install a standard dovetail finder on the Meade ETX-125. Replaces the existing angle finder bracket and uses the same screw for mounting.
Celestron NexStar 6se 8se focus adjusterthis little thing helps you to get your objects right in the focus. it becomes especially helpful in astrophotography. just stick it over the focus-knob on your telescope and you can adjust your focus as you prefer.
Meade Eyepiece CoverEyepiece dust cap for Meade ETX telescopes
80-30 mm Guider Scope Holder for Finder Scope Dovetail with Print in Place Clamps!SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.