Nebula camera holder for Creality Hi

CHANGELOG - added a connector to have the camera on the right side (just behind the LCD screen) - "Hi connector - right side". You only need to print this part - you do not need to reprint the whole mount. - added a shorter extension 75 mm and updated the print setting. This is a side mount camera stand for the Nebula for use with the Creality Hi printer. The camera has a base and an extension that is fixed under the front pad of the Creality Hi. The mount is hinged and can be rotated. The camera holder can also be rotated in 90 degrees increments thereby giving a wide range of angles for camera direction. The model also features interchangeable extension poles to customize the height of the camera (ranging from 75 mm to 175 mm - 3 to 6.5 inches). These are included on a separate plate. 3D PRINTING IMPORTANT – PRINT SETTINGS I uploaded a print setting files for all my models. The print settings has the parts positioned for correct printing and with support painted. Use “Tree Manual” as the support setting. I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings. 3D PRINT SETTINGS I use the following settings and materials to print this model: Infill % : 15% (no need for more) Nozzle diameter: 0.4 mm Layer height: 0.2 mm standard Material: PLA is recommended