Printables
Various Spacers - for a FAS Pack (TheBoardGarage) inside of a Fungineers Black Box
- Creator (as listed at the source)
- Icee Parts
- Licence
- Creative Commons — Public DomainStated at the source marketplace; SliSearch does not verify licences.
- File types
- STEP
- Pricing
- Free
- Published
- Category
- Electronics
- Downloads
- 5
Overview
LED spacer - holds down the LED inside of the black box, and also prevents misc. cables from being able to move around.
Fuse cover - Designed for TheBoardGarage's fuse block. It isolates the fuse from contacting anything else, locks both XT60s in place, and acts as a spacer for the pack when combined with the FAS spacer.
FAS spacer - goes in the corner next to the BMS mounted to the FAS pack. Prevents the pack from moving around when combined with the fuse cover. Also prevents the pack from being able to slide far enough that the BMS can contact the wall.
All pieces were printed in 72D TPU on my CC. They may be weak if printed in a brittle material.
All pieces have been tested in extreme trail scenarios on some of the gnarliest trails in PA.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
GT ELEVON PLATES REDESIGNEDStronger. Better thread contact. Better angled rear plate. More surface contact.
Onewheel GoPro Mount3 different GoPro (or any other action camera) mounts. Each of them has 2 versions: - for stock rails - for rails with 3 sides sidekicks installed After trying V1 and realising that is good enough for smooth rides but breaks easily, I've...
Onewheel Grocery HolderThis is a grocery bag holder I designed with the OW logo on it. I often Onewheel to the grocery store so this comes in handy.
Omni Charger ProtectionThis model is Protection for your Omni Charger. It also has a pocket to store the screwdriver so you wont lose it. I prints pictured were printed with Priline TPU 98a.
OneWheel XR Vertical StandA compact vertical stand designed specifically for the Onewheel+ XR. The stand holds the board upright to reduce the amount of floor space it takes up while storing it, and includes an integrated compartment for the charger so the board...
MOOD (Modular Output Onewheel Dunnage) FrameThe MOOD Frame for 21700 cell custom battery packs is designed to maximize flexibility, safety, and ease of use for the battery building process.
Ennoid XLITE-V4 32 Low Profile CoverDesigned to fit the Ennoid XLITE-V4 32 BMS . This low profile cover provides minimal protection to the smaller components in tightly packed enclosures with a bunch of crammed wires around it.
Lenco Solutions light module modMod your pint with a Ubox 100V 100A to get more power or fix your bricked one. Includes space for the Lenco LCM. Print in something temp resistance like PETG or better. Use strong settings like 6 wall loops and slow printing at high temps.
M20 Torque Box PlugM20 cable gland plug for a Torque Box 1 by The Float Life. Print in 83A TPU or similar, 4 walls with 25% rectilinear infill -- no supports necessary.
Quality Pint Battery BoxThe Quality Pint battery box was designed to take advantage of the extra volume allowed by the TFL B.A.N.G.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.